Mailing List Archive

----- Original Message -----
From: "Oleg Shevtsov" <sat@orion.interexc.com>
To: <cisco-voip@puck.nether.net>
Sent: Tuesday, February 24, 2004 2:50 PM
Subject: [cisco-voip] Type of number and Numbering plan


>
> Hi2all!
>
>
> I found at your mailing list several messages about
> IE like Type of number and Numbering plan.
>
> I'm trying to fix calling and called party number type and plan
> at Cisco AS5300 and I can't find such posiibilities.
> Debug isdn q931 shows Unknown type and Unknown type
> and all I need is to set up right values.
> May be someone know how to do that?
>

It can be accomplished in a very easy way.
There is a "numbering-type" command at dial-peer level. There you can set
the type of the calling/called (according to
the dial-peer type) number to unknown,national,international,private and
etc.

For more detailed information take a look at that page:

http://www.isel.ipl.pt/~pribeiro/RC2/CiscoIOS-12.2/fvvfax_c/vvfpeers.htm

Also, you can use the "translation-rule" command to change the dial plan
type

translation-rule XX
rule 1 987654321 987654321 any <unknow | subscriber | national |

Rgrds

Aldo Montañez
Convergia Peru SA
Phone: 511 6180828
Mobile: 511 99576473
mail: aldo.montanez@convergia.com.pe <mailto:aldo.montanez@convergia.com.pe>


-----Mensaje original-----
De: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net]En nombre de Teodor Georgiev
Enviado el: Martes, 24 de Febrero de 2004 01:32 p.m.
Para: Oleg Shevtsov; cisco-voip@puck.nether.net
Asunto: Re: [cisco-voip] Type of number and Numbering plan



----- Original Message -----
From: "Oleg Shevtsov" <sat@orion.interexc.com>
To: <cisco-voip@puck.nether.net>
Sent: Tuesday, February 24, 2004 2:50 PM
Subject: [cisco-voip] Type of number and Numbering plan


>
> Hi2all!
>
>
> I found at your mailing list several messages about
> IE like Type of number and Numbering plan.
>
> I'm trying to fix calling and called party number type and plan
> at Cisco AS5300 and I can't find such posiibilities.
> Debug isdn q931 shows Unknown type and Unknown type
> and all I need is to set up right values.
> May be someone know how to do that?
>

It can be accomplished in a very easy way.
There is a "numbering-type" command at dial-peer level. There you can set
the type of the calling/called (according to
the dial-peer type) number to unknown,national,international,private and
etc.

For more detailed information take a look at that page:

http://www.isel.ipl.pt/~pribeiro/RC2/CiscoIOS-12.2/fvvfax_c/vvfpeers.htm











_______________________________________________
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

interface Serial1/0:23
isdn map address . plan isdn type national

> -----Original Message-----
> From: cisco-voip-bounces@puck.nether.net
> [mailto:cisco-voip-bounces@puck.nether.net]On Behalf Of Aldo Montanez
> Sent: Tuesday, February 24, 2004 2:14 PM
> To: Teodor Georgiev; Oleg Shevtsov; cisco-voip@puck.nether.net
> Subject: RE: [cisco-voip] Type of number and Numbering plan
>
>
> Also, you can use the "translation-rule" command to change the dial plan
> type
>
> translation-rule XX
> rule 1 987654321 987654321 any <unknow | subscriber | national |
> international>
>
> Rgrds
>
> Aldo Montañez
> Convergia Peru SA
> Phone: 511 6180828
> Mobile: 511 99576473
> mail: aldo.montanez@convergia.com.pe
> <mailto:aldo.montanez@convergia.com.pe>
>
>
> -----Mensaje original-----
> De: cisco-voip-bounces@puck.nether.net
> [mailto:cisco-voip-bounces@puck.nether.net]En nombre de Teodor Georgiev
> Enviado el: Martes, 24 de Febrero de 2004 01:32 p.m.
> Para: Oleg Shevtsov; cisco-voip@puck.nether.net
> Asunto: Re: [cisco-voip] Type of number and Numbering plan
>
>
>
> ----- Original Message -----
> From: "Oleg Shevtsov" <sat@orion.interexc.com>
> To: <cisco-voip@puck.nether.net>
> Sent: Tuesday, February 24, 2004 2:50 PM
> Subject: [cisco-voip] Type of number and Numbering plan
>
>
> >
> > Hi2all!
> >
> >
> > I found at your mailing list several messages about
> > IE like Type of number and Numbering plan.
> >
> > I'm trying to fix calling and called party number type and plan
> > at Cisco AS5300 and I can't find such posiibilities.
> > Debug isdn q931 shows Unknown type and Unknown type
> > and all I need is to set up right values.
> > May be someone know how to do that?
> >
>
> It can be accomplished in a very easy way.
> There is a "numbering-type" command at dial-peer level. There you can set
> the type of the calling/called (according to
> the dial-peer type) number to unknown,national,international,private and
> etc.
>
> For more detailed information take a look at that page:
>
> http://www.isel.ipl.pt/~pribeiro/RC2/CiscoIOS-12.2/fvvfax_c/vvfpeers.htm
>
>
>
>
>
>
>
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip