Sorry, I forgot to update on this...
I only had one phone line plugged in and it was trying to dial via the
second FXO that did not have a Phone line. So it tried to dial,
couldn't then tried the FXO that did have a Phone line.
Layer one; you just can't have layer two without it.
Scott
-----Original Message-----
From: SGSubs [mailto:sgsubs@intechnology.co.uk]
Sent: Friday, January 30, 2004 3:08 AM
To: Voll, Scott
Cc: cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] FXO
voice-port 2/0
timeouts interdigit 4
> -----Original Message-----
> From: cisco-voip-bounces@puck.nether.net
> [mailto:cisco-voip-bounces@puck.nether.net]On Behalf Of Voll, Scott
> Sent: Tuesday January 2004 16:05
> To: cisco-voip@puck.nether.net
> Subject: [cisco-voip] FXO
>
>
> Is anyone using CM with a V-Gateway running FXO ports? I have a 1760
> running two FXO ports and it takes 5 seconds(I timed it)to place the
> call after the numbers is dialed. Is there any way to speed that up?
>
> TIA
>
>
> Scott Voll
> Network Analyst, CCNA
> Willamette ESD
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> ______________________________________________________________
> __________
> This message has been checked for all known viruses by the
> CitC Virus Scanning Service powered by SkyLabs. For further
> information visit
> http://www.citc.it
>
> ___
________________________________________________________________________
This message has been checked for all known viruses by the
CitC Virus Scanning Service powered by SkyLabs. For further information
visit
http://www.citc.it ___
_______________________________________________
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip