Mailing List Archive

MGCP IOS GW without CCM
Hi,
I was interested if anybody had configured a Cisco IOS MGCP gateway to talk to a call agent other then CCM.

What I'm trying to achieve is to have a 2651 with a NM HDV E1 in it connected to our PBX.

If I place a call from the PSTN to the Gateway I can see the MGCP events on the Cisco router but the call is not forwarded to the E1.

I have tried several different configurations for this, I have used DS0 groups and I have tried PRI groups none of which seems to work, there are some configuration examples on CCO for Trunk gateways but this implies you need to be able to speak ISUP.

If anyone could give me some advice or pointers to documentation I would appreciate it.

Thanks in advance...

Regards,

Steven Godfrey
Network Development Manager
==============================================
InTechnology plc - Secure Offsite Data
Head Office: Nidderdale House, Beckwith Knowle, Harrogate, HG3 1SA.
www.intechnology.co.uk

Regards,

Steven Godfrey
Network Development Manager
Phone 01423 850007
steven.godfrey@intechnology.co.uk
==============================================
InTechnology plc - Secure Offsite Data
Head Office: Nidderdale House, Beckwith Knowle, Harrogate, HG3 1SA.
Main: 01423 850000
Fax: 01423 858855
www.intechnology.co.uk

________________________________________________________________________
This message has been checked for all known viruses by the
CitC Virus Scanning Service powered by SkyLabs. For further information visit
http://www.citc.it

___