This should do the trick:
http://www.cisco.com/en/US/partner/tech/tk652/tk701/technologies_tech_note09 186a0080094584.shtml
When you specify the SCCP load name, make sure to use
one of the older CCM SCCP loads. The SIP images
appear to work with the load files that use the 8.3 naming
convention, but do not appear to work with the latest
load files that are signed or use (12?).3 format.
/Wes
> -----Original Message-----
> From: cisco-voip-bounces@puck.nether.net
> [mailto:cisco-voip-bounces@puck.nether.net]On Behalf Of
> sekchye@yahoo.com
> Sent: Friday, December 05, 2003 2:24 AM
> To: cisco-voip@puck.nether.net
> Cc: sekchye@yahoo.com
> Subject: [cisco-voip] revert SIP firmware to SCCP for 7960 IP phone
>
>
> Hi there!
>
> I would like to find out if a Cisco IP phone 7960
> sccp firmware is changed to SIP, how to revert back to SCCP?
>
> Is there a way to revert the firmware from SIP back
> to SCCP without using a Cisco Call manager?
>
> Thank you very much for your help!
> _______________________________________________
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip