Mailing List Archive

This is the only link I found on CCO, hopefully this helps:
http://www.cisco.com/en/US/partner/products/hw/phones/ps379/prod_release_note09186a008012821f.html

Oliver

-----Original Message-----
From: Juan Pablo Romero [mailto:jpablo.romero@ifxnw.com.ar]
Sent: Thursday, October 23, 2003 10:03 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] IP Phone 7960 firmware


I have a few Cisco IP Phone 7960s which has firmware versión: P00303030202. Does anyone know which protocols does this firmware support? (I mean: if it runs SCCP, MGCP or SIP). Can anyone suggest nice links to understand these phones configuration, and the firmware upgrade procedure? Thanks,

JP

-----Mensaje original-----
De: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] En nombre de Ryan Ratliff Enviado el: Thursday, October 23, 2003 12:56 PM
Para: Voll, Scott
CC: pacug@patch.com; cisco-voip@puck.nether.net
Asunto: [cisco-voip] Re: [PACUG] Extension Mobility CM 3.3 AD 2k

EM should use the pin, not the password.

-Ryan
----- Original Message -----
From: "Voll, Scott" <Scott.Voll@wesd.org>
To: <cisco-voip@puck.nether.net>; <pacug@patch.com>
Sent: Thursday, October 23, 2003 11:51 AM
Subject: [PACUG] Extension Mobility CM 3.3 AD 2k


> I have intergraded CM 3.3.3 with AD 2000. When using Ext. Mobility
does
> CM query AD for username and Password or does CM use the PIN (set up
in
> CM user) for the password?
>
> If it gets both the username and password from AD, is there a way to
> change that?
>
> I think the problem I'm having is that I have policies in place that
> don't allow me to use just numbers for the password in AD. Therefore
EM
> is not working because I can't put letters and stuff in for a
Password.
> If this is the case, how do I work around this?
>
> Scott Voll
> Network Analyst, CCNA
>
> _______________________________________________
> PACUG mailing list
> PACUG@tire.patch.com http://tire.patch.com/mailman/listinfo/pacug
_______________________________________________
cisco-voip mailing list
cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip


_______________________________________________
cisco-voip mailing list
cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip


ATTENTION
The information contained in this message may be legally privileged
and confidential. It is intended to be read only by the individual
or entity to whom it is addressed or by their designee. If the reader
of this message is not the intended recipient, you are on notice that
any distribution of this message, in any form, is strictly prohibited.
If you have received this message in error, please immediately notify
the sender and/or Fenwick & West LLP by telephone at (650) 988-8500
and delete or destroy any copy of this message.

That firmware load is for SCCP protocol. You can upgrade to SIP or MGCP
firmware loads, you have to have a customer login at CCO to download the
firmware. Basically, for SCCP and SIP you download the firmware to a TFTP
server and configure the phone settings to use this TFTP server. I haven't
tried MGCP. See the Voice Applications page for a complete list of firmware:

http://www.cisco.com/kobayashi/sw-center/sw-voice.shtml

The MGCP firmware is misfiled on this listing, it's not under IP Phones,
it's under Voice Application Software.

Candace

At 01:02 PM 10/23/2003, you wrote:
>I have a few Cisco IP Phone 7960s which has firmware versión:
>P00303030202.
>Does anyone know which protocols does this firmware support? (I mean: if
>it runs SCCP, MGCP or SIP).
>Can anyone suggest nice links to understand these phones configuration,
>and the firmware upgrade procedure?
>Thanks,
>
>JP
>
>-----Mensaje original-----
>De: cisco-voip-bounces@puck.nether.net
>[mailto:cisco-voip-bounces@puck.nether.net] En nombre de Ryan Ratliff
>Enviado el: Thursday, October 23, 2003 12:56 PM
>Para: Voll, Scott
>CC: pacug@patch.com; cisco-voip@puck.nether.net
>Asunto: [cisco-voip] Re: [PACUG] Extension Mobility CM 3.3 AD 2k
>
>EM should use the pin, not the password.
>
>-Ryan
>----- Original Message -----
>From: "Voll, Scott" <Scott.Voll@wesd.org>
>To: <cisco-voip@puck.nether.net>; <pacug@patch.com>
>Sent: Thursday, October 23, 2003 11:51 AM
>Subject: [PACUG] Extension Mobility CM 3.3 AD 2k
>
>
> > I have intergraded CM 3.3.3 with AD 2000. When using Ext. Mobility
>does
> > CM query AD for username and Password or does CM use the PIN (set up
>in
> > CM user) for the password?
> >
> > If it gets both the username and password from AD, is there a way to
> > change that?
> >
> > I think the problem I'm having is that I have policies in place that
> > don't allow me to use just numbers for the password in AD. Therefore
>EM
> > is not working because I can't put letters and stuff in for a
>Password.
> > If this is the case, how do I work around this?
> >
> > Scott Voll
> > Network Analyst, CCNA
> >
> > _______________________________________________
> > PACUG mailing list
> > PACUG@tire.patch.com
> > http://tire.patch.com/mailman/listinfo/pacug
>_______________________________________________
>cisco-voip mailing list
>cisco-voip@puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>_______________________________________________
>cisco-voip mailing list
>cisco-voip@puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip