Mailing List Archive

What does a 'debug isdn q931' show for an incoming call?

-Ryan
----- Original Message -----
From: "Voll, Scott" <Scott.Voll@wesd.org>
To: <cisco-voip@puck.nether.net>
Sent: Wednesday, August 27, 2003 7:07 PM
Subject: [cisco-voip] What I'm I doing wrong?


> I have CM 3.3.3 and a 2621 with a PRI going out to Verizon. I have 100
> DID's. I believe everything is configured the way it should. I can
> dial out via the PRI. And I can call the other ip phones and the phone
> attached to the PBX via a 3640 PRI connection. The only problem is I
> can't dial back in the PRI with the DID's The 2621 is running MGCP. So
> What I'm I missing that I can't receive calls from the outside via my
> DID's? Any info would be greatly appreciated.
>
> Scott Voll
> Network Analyst, CCNA
> Willamette ESD
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

Right command! It was Verizon sending 10 digits when I was expecting 4.
Problem fixed.

Thanks for the help.

scott

-----Original Message-----
From: Ryan Ratliff [mailto:rratliff@cisco.com]
Sent: Thursday, August 28, 2003 10:53 AM
To: Voll, Scott; cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] What I'm I doing wrong?

What does a 'debug isdn q931' show for an incoming call?

-Ryan
----- Original Message -----
From: "Voll, Scott" <Scott.Voll@wesd.org>
To: <cisco-voip@puck.nether.net>
Sent: Wednesday, August 27, 2003 7:07 PM
Subject: [cisco-voip] What I'm I doing wrong?


> I have CM 3.3.3 and a 2621 with a PRI going out to Verizon. I have
100
> DID's. I believe everything is configured the way it should. I can
> dial out via the PRI. And I can call the other ip phones and the
phone
> attached to the PBX via a 3640 PRI connection. The only problem is I
> can't dial back in the PRI with the DID's The 2621 is running MGCP.
So
> What I'm I missing that I can't receive calls from the outside via my
> DID's? Any info would be greatly appreciated.
>
> Scott Voll
> Network Analyst, CCNA
> Willamette ESD
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

can you grab a debug isdn q931 from the router when attempting an inbound
call?
also configure your CCM traces to detailed and then review the newest trace
after placing a call with q931translator.exe on the CCM server.

/Wes

> -----Original Message-----
> From: cisco-voip-bounces@puck.nether.net
> [mailto:cisco-voip-bounces@puck.nether.net]On Behalf Of Voll, Scott
> Sent: Wednesday, August 27, 2003 7:08 PM
> To: cisco-voip@puck.nether.net
> Subject: [cisco-voip] What I'm I doing wrong?
>
>
> I have CM 3.3.3 and a 2621 with a PRI going out to Verizon. I have 100
> DID's. I believe everything is configured the way it should. I can
> dial out via the PRI. And I can call the other ip phones and the phone
> attached to the PBX via a 3640 PRI connection. The only problem is I
> can't dial back in the PRI with the DID's The 2621 is running MGCP. So
> What I'm I missing that I can't receive calls from the outside via my
> DID's? Any info would be greatly appreciated.
>
> Scott Voll
> Network Analyst, CCNA
> Willamette ESD
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip