Mailing List Archive

Are all Gig cards (slots 7,4) in the 6509SupII fabric enabled?

brad

-----Original Message-----
From: cisco-nsp-admin@puck.nether.net
[mailto:cisco-nsp-admin@puck.nether.net] On Behalf Of Silvere M
Sent: Wednesday, October 09, 2002 3:16 AM
To: cisco-nsp@puck.nether.net
Subject: [nsp] big problem



Hi all,

I have a big problem:

I have two switches:
- one Cat 6509 with sup1/MSCF1
- and one Cat6509 with sup2/MSFC2 + Fabric enabled with gigabyte card
fabric enabled.

i have configured an etherchannel link with two gigabit link (see jpeg):

so when i enabled the port on both catalyst 6500, i receive the
following error on Cat6509 with sup2/MSFC2 :

: %EC-SP-5-CANNOT_BUNDLE2: Gi7/1 is not compatible with Gi4/1 and
will be suspended (vlan mask is different)

so, i entered to verify:

sh cdp nei 7/1 => ok
sh cdp nei 7/2 => entry not found

sh trunk and sh spantree are activate.and fowarding.


Help me please, i don't unsderstand why it doesn't run.

Regards

Silvere M.

You might want to consult Cisco's site for some help:

http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_guide_chapter09186a008007fb26.html

Good luck

--
William R. Charnock
Director of Core Technology
Allegiance Telecom, Inc
----- Original Message -----
From: Silvere M
To: cisco-nsp@puck.nether.net
Sent: Wednesday, October 09, 2002 3:16 AM
Subject: [nsp] big problem



Hi all,

I have a big problem:

I have two switches:
- one Cat 6509 with sup1/MSCF1
- and one Cat6509 with sup2/MSFC2 + Fabric enabled with gigabyte card fabric enabled.

i have configured an etherchannel link with two gigabit link (see jpeg):

so when i enabled the port on both catalyst 6500, i receive the following error on Cat6509 with sup2/MSFC2 :

: %EC-SP-5-CANNOT_BUNDLE2: Gi7/1 is not compatible with Gi4/1 and
will be suspended (vlan mask is different)

so, i entered to verify:

sh cdp nei 7/1 => ok
sh cdp nei 7/2 => entry not found

sh trunk and sh spantree are activate.and fowarding.


Help me please, i don't unsderstand why it doesn't run.

Regards

Silvere M.

Silvere,

What type of Gigabit cards are in each switch? 8 port, 16 port, 16 port
fabric enabled?

Thanks,
Thomas

Thomas Renzy
IS&T Global Network Services
VERITAS Software
Office: +650-527-4734
Mobile: +650-996-7048
Fax: +650-527-2034

"Some people drink from the fountain of knowledge, others just gargle." -
Author Robert Anthony

-----Original Message-----
From: Silvere M [mailto:silverem@wanadoo.fr]
Sent: Wednesday, October 09, 2002 1:16 AM
To: cisco-nsp@puck.nether.net
Subject: [nsp] big problem



Hi all,

I have a big problem:

I have two switches:
- one Cat 6509 with sup1/MSCF1
- and one Cat6509 with sup2/MSFC2 + Fabric enabled with gigabyte card
fabric enabled.

i have configured an etherchannel link with two gigabit link (see jpeg):

so when i enabled the port on both catalyst 6500, i receive the following
error on Cat6509 with sup2/MSFC2 :

: %EC-SP-5-CANNOT_BUNDLE2: Gi7/1 is not compatible with Gi4/1 and
will be suspended (vlan mask is different)

so, i entered to verify:

sh cdp nei 7/1 => ok
sh cdp nei 7/2 => entry not found

sh trunk and sh spantree are activate.and fowarding.


Help me please, i don't unsderstand why it doesn't run.

Regards

Silvere M.

Messageyes

----- Original Message -----
From: Brad Bonin
To: 'Silvere M' ; cisco-nsp@puck.nether.net
Sent: Wednesday, October 09, 2002 4:04 PM
Subject: RE: [nsp] big problem


Are all Gig cards (slots 7,4) in the 6509SupII fabric enabled?

brad
-----Original Message-----
From: cisco-nsp-admin@puck.nether.net [mailto:cisco-nsp-admin@puck.nether.net] On Behalf Of Silvere M
Sent: Wednesday, October 09, 2002 3:16 AM
To: cisco-nsp@puck.nether.net
Subject: [nsp] big problem



Hi all,

I have a big problem:

I have two switches:
- one Cat 6509 with sup1/MSCF1
- and one Cat6509 with sup2/MSFC2 + Fabric enabled with gigabyte card fabric enabled.

i have configured an etherchannel link with two gigabit link (see jpeg):

so when i enabled the port on both catalyst 6500, i receive the following error on Cat6509 with sup2/MSFC2 :

: %EC-SP-5-CANNOT_BUNDLE2: Gi7/1 is not compatible with Gi4/1 and
will be suspended (vlan mask is different)

so, i entered to verify:

sh cdp nei 7/1 => ok
sh cdp nei 7/2 => entry not found

sh trunk and sh spantree are activate.and fowarding.


Help me please, i don't unsderstand why it doesn't run.

Regards

Silvere M.

Dear William

Thanks for this url.

Regards

Silvere
----- Original Message -----
From: William R. Charnock
To: Silvere M ; cisco-nsp@puck.nether.net
Sent: Wednesday, October 09, 2002 4:24 PM
Subject: Re: [nsp] big problem


You might want to consult Cisco's site for some help:

http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_guide_chapter09186a008007fb26.html

Good luck

--
William R. Charnock
Director of Core Technology
Allegiance Telecom, Inc
----- Original Message -----
From: Silvere M
To: cisco-nsp@puck.nether.net
Sent: Wednesday, October 09, 2002 3:16 AM
Subject: [nsp] big problem



Hi all,

I have a big problem:

I have two switches:
- one Cat 6509 with sup1/MSCF1
- and one Cat6509 with sup2/MSFC2 + Fabric enabled with gigabyte card fabric enabled.

i have configured an etherchannel link with two gigabit link (see jpeg):

so when i enabled the port on both catalyst 6500, i receive the following error on Cat6509 with sup2/MSFC2 :

: %EC-SP-5-CANNOT_BUNDLE2: Gi7/1 is not compatible with Gi4/1 and
will be suspended (vlan mask is different)

so, i entered to verify:

sh cdp nei 7/1 => ok
sh cdp nei 7/2 => entry not found

sh trunk and sh spantree are activate.and fowarding.


Help me please, i don't unsderstand why it doesn't run.

Regards

Silvere M.