Mailing List Archive: [nsp] (no subject)

[nsp] (no subject)

Sep 26, 2002, 10:44 PM

Post #1 of 3 (1140 views)

HI,

Needed a favour.

The setup is like this ,

Some customers are connecting thro etherenet to SP is configuring vlans using dot1q encap for each

on summit switch and connecting thro fddi to us.

Can i straighaway connect the fddi to router and make subif for each of them

and encap with dot1q so that i can route them towards my gateway.

cust---ethernet----SP-----------FDDI---Router(my end)

Thanks in Advance.

Addie
Get Your Private, Free E-mail from Indiatimes at http://email.indiatimes.com
Buy Music, Video, CD-ROM, Audio-Books and Music Accessories from http://www.planetm.co.in
Change the way you talk. Indiatimes presents "Valufon", Your PC to Phone service with clear voice at rates far less than the normal ISD rates. Go to http://www.valufon.indiatimes.com. Choose your plan. BUY NOW.

[nsp] (no subject) [ In reply to ]

routernewbie at hotmail

Oct 4, 2002, 10:03 AM

Post #2 of 3 (1095 views)

Permalink

Hi,

I am trying to upgrade a cat6506 to run native IOS. Everytime I
download the code from cisco it always says invalid image, I must be doing
something wrong, or have some miss understanding.

I read some cisco docs on migrating to native IOS, but I am lost..

Can someone help?

I have attached the show version.. I have a Sup1a, MSFC, and PFC, which I
think is the required items to run native IOS..

-joe

WS-C6506 Software, Version NmpSW: 5.5(7a)

Copyright (c) 1995-2002 by Cisco Systems

NMP S/W compiled on Feb 25 2002, 13:58:30

System Bootstrap Version: 5.3(1)

Hardware Version: 2.0 Model: WS-C6506 Serial #: TBA04040070

Mod Port Model Serial # Versions

--- ---- ------------------- -----------
--------------------------------------

1 2 WS-X6K-SUP1A-2GE SAD040304AM Hw : 3.1

Fw : 5.3(1)

Fw1: 5.1(1)CSX

Sw : 5.5(7a)

Sw1: 5.5(7a)

WS-F6K-PFC SAD04010C5P Hw : 1.0

2 48 WS-X6248-RJ-45 SAD040305K4 Hw : 1.1

Fw : 4.2(0.24)VAI78

Sw : 5.5(7a)

3 48 WS-X6248-RJ-45 SAD0402015U Hw : 1.1

Fw : 4.2(0.24)VAI78

Sw : 5.5(7a)

15 1 WS-F6K-MSFC SAD04010CDG Hw : 1.3

Fw : 12.0(3)XE2

Sw : 12.0(3)XE2

DRAM FLASH NVRAM

Module Total Used Free Total Used Free Total Used Free

------ ------- ------- ------- ------- ------- ------- ----- ----- -----

1 65408K 37576K 27832K 16384K 771K 15613K 512K 198K 314K

_________________________________________________________________
MSN Photos is the easiest way to share and print your photos:
http://photos.msn.com/support/worldwide.aspx

Re: [nsp] (no subject) [ In reply to ]

sthaug at nethelp

Oct 4, 2002, 11:51 AM

Post #3 of 3 (1109 views)

Permalink

> I am trying to upgrade a cat6506 to run native IOS. Everytime I
> download the code from cisco it always says invalid image, I must be doing
> something wrong, or have some miss understanding.

Are you downloading the image in binary mode?

Steinar Haug, Nethelp consulting, sthaug@nethelp.no