Mailing List Archive: [nsp] NAT on PIX

Your NAT address pool seems a little to big. What is your edge router's Ethernet's IP address? What is your active PIX outside Ethernet's IP address? What is your standby PIX outside Ethernet's IP address?

Anchi

-----Original Message-----
From: Tejal Shah [mailto:tejal.shah@surat.iqara.net]
Sent: Friday, August 30, 2002 7:10 AM
To: cisco-nsp@puck.nether.net
Subject: [nsp] NAT on PIX

Hi all,

I have PIX 525 with versin 6.0 with six interface ( runnning in failover mode) .
I want to start NAT on my one of interface so the all client on that interface can go no internet.

I tried that with command

nat (abc) 1 0 0

global (outside) 1 203.157.94.2-203.157.94.254 netmask 255.255.255.0

The default gateway of the PIX pointing to router and i have addes one route
for network 203.157.94.0 /24 to the outside interface of firewall.

But it is not working.

what i m missing here ?

with regards
Tejal