Mailing List Archive: ASR1002-X + SPA-1X10GE-L-V2 (10gb)

ASR1002-X + SPA-1X10GE-L-V2 (10gb)

Jul 25, 2019, 5:49 AM

Post #1 of 5 (1825 views)

Hi,

We have Cisco ASR1002-X
Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-UNIVERSAL-M), Version 15.3(2)S1, RELEASE SOFTWARE (fc1)
IOS XE Version: 03.09.01.S

and 10g module SPA-1X10GE-L-V2

So, module wont work, anyone use same? OIR not detect this module
automatically but after reload module not works also...

Please look my details:

Border-ASR1002#sh hw-module subslot all oir
Module Model Operational Status
------------- -------------------- ------------------------
subslot 0/0 6XGE-BUILT-IN ok
subslot 0/1 SPA-1X10GE-L-V2 out of service(failed too many times)
subslot 0/2 SPA-8X1GE-V2 ok

Border-ASR1002#sh platform hardware slot 0 spa status
Bay SPA Type State PST POK SOK PENB RST DENB HSS
-------------------------------------------------------------------------------
0 6XGE-BUILT-IN Online 0 1 1 1 1 0 1
1 SPA-1XTENGE-XFP-V2 Offline 0 0 0 0 0 1 0
2 SPA-8X1GE-V2 Online 0 1 1 1 1 0 1
3 Empty Detection 1 0 0 0 0 1 0

Border-ASR1002#sh hw-module all fpd

==== ====================== ====== =============================================
H/W Field Programmable Current Min. Required
Slot Card Type Ver. Device: "ID-Name" Version Version
==== ====================== ====== ================== =========== ==============
0/0 6XGE-BUILT-IN 1.0 1-2KP HSPA BULLSEY 2.34 2.34
---- ---------------------- ------ ------------------ ----------- --------------
0/1 SPA-1X10... <DISABLED> 1.2 1-10GE I/O FPGA 1.9 1.9
---- ---------------------- ------ ------------------ ----------- --------------
0/2 SPA-8X1GE-V2 1.0 1-GE I/O FPGA 1.10 1.10
==== ====================== ====== =============================================

Border-ASR1002#sh platform
Chassis type: ASR1002-X

Slot Type State Insert time (ago)
--------- ------------------- --------------------- -----------------
0 ASR1002-X ok 04:21:49
0/0 6XGE-BUILT-IN ok 04:20:55
0/1 SPA-1X10GE-L-V2 out of service 04:19:44
0/2 SPA-8X1GE-V2 ok 04:20:54
R0 ASR1002-X ok, active 04:21:49
F0 ASR1002-X ok, active 04:21:49
P0 ASR1002-PWR-AC ok 04:21:20
P1 ASR1002-PWR-AC ok 04:21:19

Logs:

Jul 25 08:06:36.160: %SPA_OIR-3-HW_INIT_TIMEOUT: subslot 0/1
Jul 25 08:06:41.160: %SPA_OIR-3-RECOVERY_RELOAD: subslot 0/1: Attempting recovery by reloading SPA
Jul 25 08:06:41.161: %SPA_OIR-6-OFFLINECARD: SPA (SPA-1X10GE-L-V2) offline in subslot 0/1
Jul 25 08:06:41.161: %IOSXE_RP_ALARM-6-INFO: CLEAR CRITICAL SPA subslot 0/1 Failed
Jul 25 08:06:41.161: %IOSXE_RP_ALARM-6-INFO: ASSERT MAJOR SPA subslot 0/1 Unknown state
Jul 25 08:06:50.518: %IOSXE_SIP_SPA-3-SPI4_NOTSYNC: SIP0/1: SPA-1X10GE-L-V2[0/1]: Can not synchronize SPI4 bus (host: src not in sync, sink in sync, spa: src not in sync, sink in sync).
Jul 25 08:06:55.518: %SPA_OIR-3-RECOVERY_RELOAD: subslot 0/1: Attempting recovery by reloading SPA
Jul 25 08:06:55.519: %SPA_OIR-6-OFFLINECARD: SPA (SPA-1X10GE-L-V2) offline in subslot 0/1
Jul 25 08:07:03.528: %IOSXE_SIP_SPA-3-SPI4_NOTSYNC: SIP0/1: SPA-1X10GE-L-V2[0/1]: Can not synchronize SPI4 bus (host: src not in sync, sink in sync, spa: src not in sync, sink in sync).
Jul 25 08:07:08.528: %SPA_OIR-3-RECOVERY_RELOAD: subslot 0/1: Attempting recovery by reloading SPA
Jul 25 08:07:08.528: %SPA_OIR-6-OFFLINECARD: SPA (SPA-1X10GE-L-V2) offline in subslot 0/1
Jul 25 08:07:16.525: %IOSXE_SIP_SPA-3-SPI4_NOTSYNC: SIP0/1: SPA-1X10GE-L-V2[0/1]: Can not synchronize SPI4 bus (host: src not in sync, sink in sync, spa: src not in sync, sink in sync).
Jul 25 08:07:21.525: %SPA_OIR-3-RECOVERY_RELOAD: subslot 0/1: Attempting recovery by reloading SPA
Jul 25 08:07:21.525: %SPA_OIR-6-OFFLINECARD: SPA (SPA-1X10GE-L-V2) offline in subslot 0/1

--
? ?????????,
Sheremet mailto:romka@kharkov.org.ua

_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Re: ASR1002-X + SPA-1X10GE-L-V2 (10gb) [ In reply to ]

andrew at vianet

Jul 25, 2019, 7:07 AM

Post #2 of 5 (1824 views)

Permalink

I have this same issue with this same behavior. A reboot was also
required to get it to detect.? The kicker is we have one of these cards
in the chassis working already. TAC told me to RMA the SPA.

We are sending a second SPA-1X10GE-L-V2 that was tested in an ASR1002
(not an X, all we had to test).

#sh ver
Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-UNIVERSALK9-M),
Version 15.2(4)S7, RELEASE SOFTWARE (fc4)

IOS XE Version: 03.07.07.S

#sh plat
Chassis type: ASR1002-X

Slot????? Type??????????????? State???????????????? Insert time (ago)
--------- ------------------- --------------------- -----------------
0???????? ASR1002-X?????????? ok 7w1d
?0/0????? 6XGE-BUILT-IN?????? ok 7w1d
?0/1????? SPA-1X10GE-L-V2???? out of service 2w0d
?0/2????? SPA-1X10GE-L-V2???? ok 7w1d
R0??????? ASR1002-X?????????? ok, active 7w1d
F0??????? ASR1002-X?????????? ok, active 7w1d
P0??????? ASR1002-PWR-AC????? ok 7w1d
P1??????? ASR1002-PWR-AC????? ok 7w1d

Slot????? CPLD Version??????? Firmware Version
--------- ------------------- ---------------------------------------
0???????? 12042303 15.2(4r)S1
R0??????? 12042303 15.2(4r)S1
F0??????? 12042303 15.2(4r)S1

#sh hw-module subslot all oir
Module??????? Model??????????????? Operational Status
------------- -------------------- ------------------------
subslot 0/0?? 6XGE-BUILT-IN??????? ok
subslot 0/1?? SPA-1X10GE-L-V2????? out of service(failed too many times)
subslot 0/2?? SPA-1X10GE-L-V2????? ok

On 7/25/2019 8:49 AM, Sheremet Roman wrote:
> Hi,
>
> We have Cisco ASR1002-X
> Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-UNIVERSAL-M), Version 15.3(2)S1, RELEASE SOFTWARE (fc1)
> IOS XE Version: 03.09.01.S
>
> and 10g module SPA-1X10GE-L-V2
>
> So, module wont work, anyone use same? OIR not detect this module
> automatically but after reload module not works also...
>
>
> Please look my details:
>
> Border-ASR1002#sh hw-module subslot all oir
> Module Model Operational Status
> ------------- -------------------- ------------------------
> subslot 0/0 6XGE-BUILT-IN ok
> subslot 0/1 SPA-1X10GE-L-V2 out of service(failed too many times)
> subslot 0/2 SPA-8X1GE-V2 ok
>
> Border-ASR1002#sh platform hardware slot 0 spa status
> Bay SPA Type State PST POK SOK PENB RST DENB HSS
> -------------------------------------------------------------------------------
> 0 6XGE-BUILT-IN Online 0 1 1 1 1 0 1
> 1 SPA-1XTENGE-XFP-V2 Offline 0 0 0 0 0 1 0
> 2 SPA-8X1GE-V2 Online 0 1 1 1 1 0 1
> 3 Empty Detection 1 0 0 0 0 1 0
>
> Border-ASR1002#sh hw-module all fpd
>
> ==== ====================== ====== =============================================
> H/W Field Programmable Current Min. Required
> Slot Card Type Ver. Device: "ID-Name" Version Version
> ==== ====================== ====== ================== =========== ==============
> 0/0 6XGE-BUILT-IN 1.0 1-2KP HSPA BULLSEY 2.34 2.34
> ---- ---------------------- ------ ------------------ ----------- --------------
> 0/1 SPA-1X10... <DISABLED> 1.2 1-10GE I/O FPGA 1.9 1.9
> ---- ---------------------- ------ ------------------ ----------- --------------
> 0/2 SPA-8X1GE-V2 1.0 1-GE I/O FPGA 1.10 1.10
> ==== ====================== ====== =============================================
>
> Border-ASR1002#sh platform
> Chassis type: ASR1002-X
>
> Slot Type State Insert time (ago)
> --------- ------------------- --------------------- -----------------
> 0 ASR1002-X ok 04:21:49
> 0/0 6XGE-BUILT-IN ok 04:20:55
> 0/1 SPA-1X10GE-L-V2 out of service 04:19:44
> 0/2 SPA-8X1GE-V2 ok 04:20:54
> R0 ASR1002-X ok, active 04:21:49
> F0 ASR1002-X ok, active 04:21:49
> P0 ASR1002-PWR-AC ok 04:21:20
> P1 ASR1002-PWR-AC ok 04:21:19
>
>
> Logs:
>
> Jul 25 08:06:36.160: %SPA_OIR-3-HW_INIT_TIMEOUT: subslot 0/1
> Jul 25 08:06:41.160: %SPA_OIR-3-RECOVERY_RELOAD: subslot 0/1: Attempting recovery by reloading SPA
> Jul 25 08:06:41.161: %SPA_OIR-6-OFFLINECARD: SPA (SPA-1X10GE-L-V2) offline in subslot 0/1
> Jul 25 08:06:41.161: %IOSXE_RP_ALARM-6-INFO: CLEAR CRITICAL SPA subslot 0/1 Failed
> Jul 25 08:06:41.161: %IOSXE_RP_ALARM-6-INFO: ASSERT MAJOR SPA subslot 0/1 Unknown state
> Jul 25 08:06:50.518: %IOSXE_SIP_SPA-3-SPI4_NOTSYNC: SIP0/1: SPA-1X10GE-L-V2[0/1]: Can not synchronize SPI4 bus (host: src not in sync, sink in sync, spa: src not in sync, sink in sync).
> Jul 25 08:06:55.518: %SPA_OIR-3-RECOVERY_RELOAD: subslot 0/1: Attempting recovery by reloading SPA
> Jul 25 08:06:55.519: %SPA_OIR-6-OFFLINECARD: SPA (SPA-1X10GE-L-V2) offline in subslot 0/1
> Jul 25 08:07:03.528: %IOSXE_SIP_SPA-3-SPI4_NOTSYNC: SIP0/1: SPA-1X10GE-L-V2[0/1]: Can not synchronize SPI4 bus (host: src not in sync, sink in sync, spa: src not in sync, sink in sync).
> Jul 25 08:07:08.528: %SPA_OIR-3-RECOVERY_RELOAD: subslot 0/1: Attempting recovery by reloading SPA
> Jul 25 08:07:08.528: %SPA_OIR-6-OFFLINECARD: SPA (SPA-1X10GE-L-V2) offline in subslot 0/1
> Jul 25 08:07:16.525: %IOSXE_SIP_SPA-3-SPI4_NOTSYNC: SIP0/1: SPA-1X10GE-L-V2[0/1]: Can not synchronize SPI4 bus (host: src not in sync, sink in sync, spa: src not in sync, sink in sync).
> Jul 25 08:07:21.525: %SPA_OIR-3-RECOVERY_RELOAD: subslot 0/1: Attempting recovery by reloading SPA
> Jul 25 08:07:21.525: %SPA_OIR-6-OFFLINECARD: SPA (SPA-1X10GE-L-V2) offline in subslot 0/1
>
>
>
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Re: ASR1002-X + SPA-1X10GE-L-V2 (10gb) [ In reply to ]

dudepron at gmail

Jul 26, 2019, 4:46 PM

Post #3 of 5 (1816 views)

Permalink

has this card worked in a different chassis?
i suspect a bad card

On Thursday, July 25, 2019, Andrew K. <andrew@vianet.ca> wrote:

> I have this same issue with this same behavior. A reboot was also required
> to get it to detect. The kicker is we have one of these cards in the
> chassis working already. TAC told me to RMA the SPA.
>
> We are sending a second SPA-1X10GE-L-V2 that was tested in an ASR1002 (not
> an X, all we had to test).
>
> #sh ver
> Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-UNIVERSALK9-M),
> Version 15.2(4)S7, RELEASE SOFTWARE (fc4)
>
> IOS XE Version: 03.07.07.S
>
> #sh plat
> Chassis type: ASR1002-X
>
> Slot Type State Insert time (ago)
> --------- ------------------- --------------------- -----------------
> 0 ASR1002-X ok 7w1d
> 0/0 6XGE-BUILT-IN ok 7w1d
> 0/1 SPA-1X10GE-L-V2 out of service 2w0d
> 0/2 SPA-1X10GE-L-V2 ok 7w1d
> R0 ASR1002-X ok, active 7w1d
> F0 ASR1002-X ok, active 7w1d
> P0 ASR1002-PWR-AC ok 7w1d
> P1 ASR1002-PWR-AC ok 7w1d
>
> Slot CPLD Version Firmware Version
> --------- ------------------- ---------------------------------------
> 0 12042303 15.2(4r)S1
> R0 12042303 15.2(4r)S1
> F0 12042303 15.2(4r)S1
>
>
> #sh hw-module subslot all oir
> Module Model Operational Status
> ------------- -------------------- ------------------------
> subslot 0/0 6XGE-BUILT-IN ok
> subslot 0/1 SPA-1X10GE-L-V2 out of service(failed too many times)
> subslot 0/2 SPA-1X10GE-L-V2 ok
>
>
>
> On 7/25/2019 8:49 AM, Sheremet Roman wrote:
>
>> Hi,
>>
>> We have Cisco ASR1002-X
>> Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-UNIVERSAL-M),
>> Version 15.3(2)S1, RELEASE SOFTWARE (fc1)
>> IOS XE Version: 03.09.01.S
>>
>> and 10g module SPA-1X10GE-L-V2
>>
>> So, module wont work, anyone use same? OIR not detect this module
>> automatically but after reload module not works also...
>>
>>
>> Please look my details:
>>
>> Border-ASR1002#sh hw-module subslot all oir
>> Module Model Operational Status
>> ------------- -------------------- ------------------------
>> subslot 0/0 6XGE-BUILT-IN ok
>> subslot 0/1 SPA-1X10GE-L-V2 out of service(failed too many times)
>> subslot 0/2 SPA-8X1GE-V2 ok
>>
>> Border-ASR1002#sh platform hardware slot 0 spa status
>> Bay SPA Type State PST POK SOK PENB RST
>> DENB HSS
>> ------------------------------------------------------------
>> -------------------
>> 0 6XGE-BUILT-IN Online 0 1 1 1 1 0
>> 1
>> 1 SPA-1XTENGE-XFP-V2 Offline 0 0 0 0 0 1
>> 0
>> 2 SPA-8X1GE-V2 Online 0 1 1 1 1 0
>> 1
>> 3 Empty Detection 1 0 0 0 0 1
>> 0
>>
>> Border-ASR1002#sh hw-module all fpd
>>
>> ==== ====================== ====== ==============================
>> ===============
>> H/W Field Programmable Current Min.
>> Required
>> Slot Card Type Ver. Device: "ID-Name" Version
>> Version
>> ==== ====================== ====== ================== ===========
>> ==============
>> 0/0 6XGE-BUILT-IN 1.0 1-2KP HSPA BULLSEY 2.34
>> 2.34
>> ---- ---------------------- ------ ------------------ -----------
>> --------------
>> 0/1 SPA-1X10... <DISABLED> 1.2 1-10GE I/O FPGA 1.9 1.9
>> ---- ---------------------- ------ ------------------ -----------
>> --------------
>> 0/2 SPA-8X1GE-V2 1.0 1-GE I/O FPGA 1.10
>> 1.10
>> ==== ====================== ====== ==============================
>> ===============
>>
>> Border-ASR1002#sh platform
>> Chassis type: ASR1002-X
>>
>> Slot Type State Insert time (ago)
>> --------- ------------------- --------------------- -----------------
>> 0 ASR1002-X ok 04:21:49
>> 0/0 6XGE-BUILT-IN ok 04:20:55
>> 0/1 SPA-1X10GE-L-V2 out of service 04:19:44
>> 0/2 SPA-8X1GE-V2 ok 04:20:54
>> R0 ASR1002-X ok, active 04:21:49
>> F0 ASR1002-X ok, active 04:21:49
>> P0 ASR1002-PWR-AC ok 04:21:20
>> P1 ASR1002-PWR-AC ok 04:21:19
>>
>>
>> Logs:
>>
>> Jul 25 08:06:36.160: %SPA_OIR-3-HW_INIT_TIMEOUT: subslot 0/1
>> Jul 25 08:06:41.160: %SPA_OIR-3-RECOVERY_RELOAD: subslot 0/1: Attempting
>> recovery by reloading SPA
>> Jul 25 08:06:41.161: %SPA_OIR-6-OFFLINECARD: SPA (SPA-1X10GE-L-V2)
>> offline in subslot 0/1
>> Jul 25 08:06:41.161: %IOSXE_RP_ALARM-6-INFO: CLEAR CRITICAL SPA subslot
>> 0/1 Failed
>> Jul 25 08:06:41.161: %IOSXE_RP_ALARM-6-INFO: ASSERT MAJOR SPA subslot 0/1
>> Unknown state
>> Jul 25 08:06:50.518: %IOSXE_SIP_SPA-3-SPI4_NOTSYNC: SIP0/1:
>> SPA-1X10GE-L-V2[0/1]: Can not synchronize SPI4 bus (host: src not in sync,
>> sink in sync, spa: src not in sync, sink in sync).
>> Jul 25 08:06:55.518: %SPA_OIR-3-RECOVERY_RELOAD: subslot 0/1: Attempting
>> recovery by reloading SPA
>> Jul 25 08:06:55.519: %SPA_OIR-6-OFFLINECARD: SPA (SPA-1X10GE-L-V2)
>> offline in subslot 0/1
>> Jul 25 08:07:03.528: %IOSXE_SIP_SPA-3-SPI4_NOTSYNC: SIP0/1:
>> SPA-1X10GE-L-V2[0/1]: Can not synchronize SPI4 bus (host: src not in sync,
>> sink in sync, spa: src not in sync, sink in sync).
>> Jul 25 08:07:08.528: %SPA_OIR-3-RECOVERY_RELOAD: subslot 0/1: Attempting
>> recovery by reloading SPA
>> Jul 25 08:07:08.528: %SPA_OIR-6-OFFLINECARD: SPA (SPA-1X10GE-L-V2)
>> offline in subslot 0/1
>> Jul 25 08:07:16.525: %IOSXE_SIP_SPA-3-SPI4_NOTSYNC: SIP0/1:
>> SPA-1X10GE-L-V2[0/1]: Can not synchronize SPI4 bus (host: src not in sync,
>> sink in sync, spa: src not in sync, sink in sync).
>> Jul 25 08:07:21.525: %SPA_OIR-3-RECOVERY_RELOAD: subslot 0/1: Attempting
>> recovery by reloading SPA
>> Jul 25 08:07:21.525: %SPA_OIR-6-OFFLINECARD: SPA (SPA-1X10GE-L-V2)
>> offline in subslot 0/1
>>
>>
>>
>> _______________________________________________
> cisco-nsp mailing list cisco-nsp@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Re: ASR1002-X + SPA-1X10GE-L-V2 (10gb) [ In reply to ]

romka at kharkov

Sep 5, 2019, 7:43 AM

Post #4 of 5 (1751 views)

Permalink

Hi,

Yep we change card to brand new and update our IOS, now looks best
now:

ASR1002#sh platform | in 10G
0/3 SPA-1X10GE-L-V2 ok 1w0d

But we have one more problem, media errors:

ASR1002# sh int TenGigabitEthernet 0/3/0 | in err

227 input errors, 181 CRC, 46 frame, 0 overrun, 0 ignored
362103129 packets output, 194841004589 bytes, 0 underruns
0 output errors, 0 collisions, 5 interface resets
0 babbles, 0 late collision, 0 deferred

And amount growing up.... Fiber is good, we reuse same fiber which we
use with 1G link, we just move it to 10G.

Any idea how to debug this ? Or possible we need some settings for 10G
links? (I use 10G first time). Maybe something like as frame size, or
MTU, etc....

> Hi,

> We have Cisco ASR1002-X
> Cisco IOS Software, IOS-XE Software

--
? ?????????,
Sheremet mailto:romka@kharkov.org.ua

_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Re: ASR1002-X + SPA-1X10GE-L-V2 (10gb) [ In reply to ]

dudepron at gmail

Sep 5, 2019, 8:57 AM

Post #5 of 5 (1749 views)

Permalink

clean the fiber.

On Thursday, September 5, 2019, Sheremet Roman <romka@kharkov.org.ua> wrote:

> Hi,
>
> Yep we change card to brand new and update our IOS, now looks best
> now:
>
> ASR1002#sh platform | in 10G
> 0/3 SPA-1X10GE-L-V2 ok 1w0d
>
> But we have one more problem, media errors:
>
> ASR1002# sh int TenGigabitEthernet 0/3/0 | in err
>
> 227 input errors, 181 CRC, 46 frame, 0 overrun, 0 ignored
> 362103129 packets output, 194841004589 bytes, 0 underruns
> 0 output errors, 0 collisions, 5 interface resets
> 0 babbles, 0 late collision, 0 deferred
>
> And amount growing up.... Fiber is good, we reuse same fiber which we
> use with 1G link, we just move it to 10G.
>
> Any idea how to debug this ? Or possible we need some settings for 10G
> links? (I use 10G first time). Maybe something like as frame size, or
> MTU, etc....
>
>
>
> > Hi,
>
> > We have Cisco ASR1002-X
> > Cisco IOS Software, IOS-XE Software
>
>
>
>
>
>
> --
> ? ?????????,
> Sheremet mailto:romka@kharkov.org.ua
>
> _______________________________________________
> cisco-nsp mailing list cisco-nsp@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/