Mailing List Archive: AS5300 IOS upgrade

AS5300 IOS upgrade

Jul 22, 2003, 4:56 AM

Post #1 of 3 (800 views)

I've just upgraded an AS5300 from 12.0(16) to 12.0(27) as recommended by
the recent advisory.

When I make a call to the NAS from a normal phone and hang up, the
following message appears in the log:

rt105dub#
Jul 22 11:52:56: isdn_Call_disconnect()

There is no debugging turned on.

Is there anyway to turn this off? It did not appear to be an issue in
12.0(16)

Thanks,

T.

Thomas Bridge tbridge@netsource.ie
Network and Systems Architect Support phone: +353 1 4336070
Netsource 26 Upr Fitzwilliam St., Dublin 2

Re: AS5300 IOS upgrade [ In reply to ]

Aaron at cisco

Jul 22, 2003, 1:26 PM

Post #2 of 3 (727 views)

Permalink

Thomas,

This "isdn_Call_disconnect()" message in 12.0 mainline is
CSCdy24749 isdn_Call_disconnect displays on bootup.

This is a regression introduced in 12.0(19.1)*
by CSCdp70004. It was caused by a stray debugging message left in the code;
this is a purely cosmetic issue.

Since 12.0 mainline is GD, cosmetic bugfixes cannot be committed
- therefore CSCdy24749 has been Closed. Thus, in 12.0 mainline,
you'll just have to live with this message.

12.1 and above don't have this message.

Aaron

---

> I've just upgraded an AS5300 from 12.0(16) to 12.0(27) as recommended by
> the recent advisory.

> When I make a call to the NAS from a normal phone and hang up, the
> following message appears in the log:

> rt105dub#
> Jul 22 11:52:56: isdn_Call_disconnect()

> There is no debugging turned on.

> Is there anyway to turn this off? It did not appear to be an issue in
> 12.0(16)

> Thanks,

> T.

> Thomas Bridge tbridge@netsource.ie
> Network and Systems Architect Support phone: +353 1 4336070
> Netsource 26 Upr Fitzwilliam St., Dublin 2

> _______________________________________________
> cisco-nas mailing list
> cisco-nas@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nas

Re: AS5300 IOS upgrade [ In reply to ]

mljohnso at cisco

Jul 22, 2003, 2:46 PM

Post #3 of 3 (727 views)

Permalink

At 12:56 PM 7/22/2003 +0100, Thomas Bridge wrote:
>I've just upgraded an AS5300 from 12.0(16) to 12.0(27) as recommended by
>the recent advisory.
>
>When I make a call to the NAS from a normal phone and hang up, the
>following message appears in the log:
>
>rt105dub#
>Jul 22 11:52:56: isdn_Call_disconnect()
>
>There is no debugging turned on.
>
>Is there anyway to turn this off? It did not appear to be an issue in
>12.0(16)

sigh.

I think that this cosmetic problem was introduced by CSCdp70004 into
the different 12.0 and 12.1 trains. The problem was removed by CSCdw44437,
but only applied to the 12.0S trains. Looks like it is gone from the
12.1 trains, too.

mark