Hello
Sorry, but i don't do your request. This router has big traffic, and I
don't have time to do this because the router interface soon after reload
was froze (0-30 min).
I upgraded this router to c7200-is-mz.122-15.T5.bin and it's working fine.
Laci
ps: this is the "sh ver" :
#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-IS-M), Version 12.2(15)T5, RELEASE SOFTWARE
(fc1)
TAC Support:
http://www.cisco.com/tac Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Wed 11-Jun-03 19:39 by eaarmas
Image text-base: 0x60008954, data-base: 0x61BF0000
ROM: System Bootstrap, Version 12.2(1r) [dchih 1r], RELEASE SOFTWARE (fc1)
BOOTLDR: 7200 Software (C7200-BOOT-M), Version 12.0(10)S, EARLY DEPLOYMENT
RELEASE SOFTWARE (fc1)
ADSL-Gw uptime is 6 hours, 56 minutes
System returned to ROM by reload at 12:27:13 CEST Tue Jul 22 2003
System restarted at 12:29:51 CEST Tue Jul 22 2003
Running default software
cisco 7206VXR (NPE300) processor (revision D) with 229376K/65536K bytes of
memory.
Processor board ID 16079126
R7000 CPU at 262Mhz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3 Cache
6 slot VXR midplane, Version 2.0
Last reset from power-on
Channelized E1, Version 1.0.
Bridging software.
X.25 software, Version 3.0.0.
Primary Rate ISDN software, Version 1.1.
2 FastEthernet/IEEE 802.3 interface(s)
17 Serial network interface(s)
4 Channelized E1/PRI port(s)
125K bytes of non-volatile configuration memory.
62592K bytes of ATA PCMCIA card at slot 1 (Sector size 512 bytes).
4096K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102
> >I upgraded my 7200 router with a rebuild ios: c7200-is-mz.122-16.B1.bin
> >
> >A few minute later the router fastethernet interface was froze:
> >
> >Input queue: 76/75/50475/0 (size/max/drops/flushes); Total output drops: 0
>
> Can you please send me <sh ver> and <sh buff in fast XX packet> please?
>
> Thanks,
>
> mark
>
>
>