Hello!
Cisco NPE-G1 is used as PPPoE terminator.
anonymized config is attached.
After change IOS from c7200-g4js-mz.123-19 to
c7200-i12s-mz.123-14.YM8.bin, on the same customer
load main CPU is more load, even with ip mpf.
Can some body give us recomendation how to
reconfigure NPE-G1 for more effective use?
--
WBR, Alexey G Misyurenko ( MAG-RIPE | MMAGG-RIPN )
CTO of Caravan ISP http://www.caravan.ru
Phone: +7 495 3632252 Cell: +7 495 5082794
Cisco NPE-G1 is used as PPPoE terminator.
anonymized config is attached.
After change IOS from c7200-g4js-mz.123-19 to
c7200-i12s-mz.123-14.YM8.bin, on the same customer
load main CPU is more load, even with ip mpf.
Can some body give us recomendation how to
reconfigure NPE-G1 for more effective use?
--
WBR, Alexey G Misyurenko ( MAG-RIPE | MMAGG-RIPN )
CTO of Caravan ISP http://www.caravan.ru
Phone: +7 495 3632252 Cell: +7 495 5082794
Attached Files:
-
nas.cfg (6.78 KB)