Mailing List Archive

Imad,

we send Giga-words attributes 52/53 only if the counter(s) wrapped at
least once. So you will only see it on long-lived sessions with lots of
traffic.

oli

Imad Buhidma <> wrote on Monday, July 25, 2005 2:20 PM:

> Hello
>
> We have Cisco 7206VXR (NPE-G1) processor with IOS image
> c7200-js-mz.123-8.T3 ,I have configured the router to send
> "Acct-Input-Giga-Words" attribute with "aaa accounting gigawords"
> command but when i issued "debug radius accounting" command i could
> not find anything related to "Acct-Input-Giga-Words" in debugging,
> here is some of debugging results :
>
> Jul 25 13:57:40.688: RADIUS: Acct-Session-Id [44] 10 "00000025"
> Jul 25 13:57:40.688: RADIUS: Vendor, Cisco [26] 41
> Jul 25 13:57:40.688: RADIUS: Cisco AVpair [1] 35
> "client-mac-address=0060.4c3c.cde5"
> Jul 25 13:57:40.688: RADIUS: Framed-Protocol [7] 6 PPP
> [1]
> Jul 25 13:57:40.688: RADIUS: Framed-IP-Address [8] 6 172.16.0.1
> Jul 25 13:57:40.688: RADIUS: Vendor, Cisco [26] 35
> Jul 25 13:57:40.688: RADIUS: Cisco AVpair [1] 29
> "connect-progress=LAN Ses Up"
> Jul 25 13:57:40.688: RADIUS: Acct-Session-Time [46] 6 1298
> Jul 25 13:57:40.688: RADIUS: Acct-Input-Octets [42] 6 443124
> Jul 25 13:57:40.688: RADIUS: Acct-Output-Octets [43] 6 5174679
> Jul 25 13:57:40.688: RADIUS: Acct-Input-Packets [47] 6 3779
> Jul 25 13:57:40.688: RADIUS: Acct-Output-Packets [48] 6 4862
> Jul 25 13:57:40.688: RADIUS: Acct-Authentic [45] 6 RADIUS
> [1]
> Jul 25 13:57:40.688: RADIUS: User-Name [1] 11 "imad"
> Jul 25 13:57:40.688: RADIUS: Acct-Status-Type [40] 6 Watchdog
> [3]
> Jul 25 13:57:40.688: RADIUS: NAS-Port-Type [61] 6 Virtual
> [5]
> Jul 25 13:57:40.688: RADIUS: Vendor, Cisco [26] 19
> Jul 25 13:57:40.688: RADIUS: cisco-nas-port [2] 13
> "1/0/0/10.41"
> Jul 25 13:57:40.688: RADIUS: NAS-Port [5] 6 0
> Jul 25 13:57:40.688: RADIUS: Class [25] 74
>
> all the debgging results are like this,there's nothing related to
> "Acct-Input-Giga-Words" attribute even when i clear all sessions.
>
> What soulid i do to make the router send "Acct-Input-Giga-Words"
> attribute and how i can check if the router send the attribute using
> debugging ?
>
>
> Imad Buhidma
> Best Regards.
>
>
>
>
> _______________________________________________
> cisco-nas mailing list
> cisco-nas@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nas

Hello

We have Cisco 7206VXR (NPE-G1) processor with IOS image c7200-js-mz.123-8.T3 ,I have configured the router to send
"Acct-Input-Giga-Words" attribute with "aaa accounting gigawords" command but when i issued "debug radius accounting" command i could not find anything related to "Acct-Input-Giga-Words" in debugging, here is some of debugging results :

Jul 25 13:57:40.688: RADIUS: Acct-Session-Id [44] 10 "00000025"
Jul 25 13:57:40.688: RADIUS: Vendor, Cisco [26] 41
Jul 25 13:57:40.688: RADIUS: Cisco AVpair [1] 35 "client-mac-address=0060.4c3c.cde5"
Jul 25 13:57:40.688: RADIUS: Framed-Protocol [7] 6 PPP [1]
Jul 25 13:57:40.688: RADIUS: Framed-IP-Address [8] 6 172.16.0.1
Jul 25 13:57:40.688: RADIUS: Vendor, Cisco [26] 35
Jul 25 13:57:40.688: RADIUS: Cisco AVpair [1] 29 "connect-progress=LAN Ses Up"
Jul 25 13:57:40.688: RADIUS: Acct-Session-Time [46] 6 1298
Jul 25 13:57:40.688: RADIUS: Acct-Input-Octets [42] 6 443124
Jul 25 13:57:40.688: RADIUS: Acct-Output-Octets [43] 6 5174679
Jul 25 13:57:40.688: RADIUS: Acct-Input-Packets [47] 6 3779
Jul 25 13:57:40.688: RADIUS: Acct-Output-Packets [48] 6 4862
Jul 25 13:57:40.688: RADIUS: Acct-Authentic [45] 6 RADIUS [1]
Jul 25 13:57:40.688: RADIUS: User-Name [1] 11 "imad"
Jul 25 13:57:40.688: RADIUS: Acct-Status-Type [40] 6 Watchdog [3]
Jul 25 13:57:40.688: RADIUS: NAS-Port-Type [61] 6 Virtual [5]
Jul 25 13:57:40.688: RADIUS: Vendor, Cisco [26] 19
Jul 25 13:57:40.688: RADIUS: cisco-nas-port [2] 13 "1/0/0/10.41"
Jul 25 13:57:40.688: RADIUS: NAS-Port [5] 6 0
Jul 25 13:57:40.688: RADIUS: Class [25] 74

all the debgging results are like this,there's nothing related to "Acct-Input-Giga-Words" attribute even when i clear all sessions.

What soulid i do to make the router send "Acct-Input-Giga-Words" attribute and how i can check if the router send the attribute using debugging ?


Imad Buhidma
Best Regards.