Here's a rather basic question, but I want to be sure before implementing it
on the network:
On an AS5396 serving dialup users only, will I have any problem if I
- set the IP address of the Ethernet interface to 10.10.10.2/30
- assign 10.10.10.128/25 to the modems (i.e. ip local pool default
10.10.10.129 10.10.10.254)
- have the gateway router (10.10.10.1/30) route 10.10.10.128/25 to
10.10.10.2
I assume it'll work, but.....
TIA,
Adam
---
[.This e-mail was scanned for viruses by Webjogger's AntiVirus Protection System]
on the network:
On an AS5396 serving dialup users only, will I have any problem if I
- set the IP address of the Ethernet interface to 10.10.10.2/30
- assign 10.10.10.128/25 to the modems (i.e. ip local pool default
10.10.10.129 10.10.10.254)
- have the gateway router (10.10.10.1/30) route 10.10.10.128/25 to
10.10.10.2
I assume it'll work, but.....
TIA,
Adam
---
[.This e-mail was scanned for viruses by Webjogger's AntiVirus Protection System]