Mailing List Archive

Broadband aggregation on 7600 / MWAM
Hi,

I was wondering if anyone on the list had expirience in
broadband aggregation on 7600 and would care to enlighten
me.

What I want to do is to aggregate DSL users on a box, which will serve
both as an LAC and an LNS (due to the need to seperate users based on
domain). On the LNS (same box :)). I'm using PPPoE.

In Cisco's BBA portfolio, the reference to 7600 is "Cisco 7600 with
MWAM" (http://www.cisco.com/en/US/customer/products/hw/routers/ps368/prod_brochure09186a0080088763.html).

Does this mean that I have to have an MWAM module to do this, or can I
just run it on the 7600 itself? If I can do that, what kind of
performance can I expect (number of users)?

Thanks in advance,

--
Kristófer Sigurðsson Tel: +354 414 1600
Netrekstur/Network Operations IP Fjarskipti ehf.
RE: Broadband aggregation on 7600 / MWAM [ In reply to ]
Yes, you need to have MWAM module to have broadband on the c7600 routers.
Broadband on c7600 (without MWAM card) will be supported , not sure about the time though.

Here is the link about the MWAM card

http://www.cisco.com/univercd/cc/td/doc/product/core/cis7600/cfgnotes/mwam_icn.htm

Thanks
Manoj

|-----Original Message-----
|From: cisco-bba-bounces@puck.nether.net
|[mailto:cisco-bba-bounces@puck.nether.net] On Behalf Of
|Kristofer Sigurdsson
|Sent: Wednesday, July 20, 2005 10:57 PM
|To: cisco-bba@puck.nether.net
|Subject: [cisco-bba] Broadband aggregation on 7600 / MWAM
|
|Hi,
|
|I was wondering if anyone on the list had expirience in
|broadband aggregation on 7600 and would care to enlighten me.
|
|What I want to do is to aggregate DSL users on a box, which
|will serve both as an LAC and an LNS (due to the need to
|seperate users based on domain). On the LNS (same box :)).
|I'm using PPPoE.
|
|In Cisco's BBA portfolio, the reference to 7600 is "Cisco 7600
|with MWAM"
|(http://www.cisco.com/en/US/customer/products/hw/routers/ps368/
|prod_brochure09186a0080088763.html).
|
|Does this mean that I have to have an MWAM module to do this,
|or can I just run it on the 7600 itself? If I can do that,
|what kind of performance can I expect (number of users)?
|
|Thanks in advance,
|
|--
|Kristófer Sigurðsson Tel: +354 414 1600
|Netrekstur/Network Operations IP Fjarskipti ehf.
|
|_______________________________________________
|cisco-bba mailing list
|cisco-bba@puck.nether.net
|https://puck.nether.net/mailman/listinfo/cisco-bba
|