Bart Jan,
Netflow would probably do what we need. The only drawback is majority of
Netflow Collection/Analysis software out there is either at a cost or
runs on Unix.
Correct me if I'm wrong.
I was hoping that we could have done this with our current setup i.e
MRTG or RRD, if necessary.
Thanks,
Mark.
-----Original Message-----
From: BartJan Menkveld [mailto:bartjan@routit.nl]
Sent: 21 December 2005 13:49
To: Mark Tohill
Subject: RE: [c-nsp] MRTG a L2TP VPDN Looback Interface
Hello Mark,
I suggest using netflow accounting on a per protocol basis to determine
the amount of l2tp traffic.
With kind regards,
Bart Jan Menkveld
-----Original Message-----
From: cisco-nsp-bounces@puck.nether.net
[mailto:cisco-nsp-bounces@puck.nether.net] On Behalf Of Mark Tohill
Sent: woensdag 21 december 2005 14:30
To: cisco-bba@puck.nether.net
Cc: cisco-nsp@puck.nether.net
Subject: [c-nsp] MRTG a L2TP VPDN Looback Interface
Hi,
We have 7204VXR's with L2TP VPDN traffic servicing DSL users from telco
coming in on a GigEthernet port.
The same port also ships out internet-bound traffic for same users.
Has anyone thoughts on how to determine/poll the VPDN traffic from telco
separately from raw outbound IP traffic?
VPDN tunnels terminate on loopbacks which we have tried to monitor, with
no success. We hoped to subtract this from total in/out traffic on gigE
port and graph results to new chart.
Has anyone a means of getting around this?
Thanks.
Mark.
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-bba mailing list
cisco-bba@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-bba
Netflow would probably do what we need. The only drawback is majority of
Netflow Collection/Analysis software out there is either at a cost or
runs on Unix.
Correct me if I'm wrong.
I was hoping that we could have done this with our current setup i.e
MRTG or RRD, if necessary.
Thanks,
Mark.
-----Original Message-----
From: BartJan Menkveld [mailto:bartjan@routit.nl]
Sent: 21 December 2005 13:49
To: Mark Tohill
Subject: RE: [c-nsp] MRTG a L2TP VPDN Looback Interface
Hello Mark,
I suggest using netflow accounting on a per protocol basis to determine
the amount of l2tp traffic.
With kind regards,
Bart Jan Menkveld
-----Original Message-----
From: cisco-nsp-bounces@puck.nether.net
[mailto:cisco-nsp-bounces@puck.nether.net] On Behalf Of Mark Tohill
Sent: woensdag 21 december 2005 14:30
To: cisco-bba@puck.nether.net
Cc: cisco-nsp@puck.nether.net
Subject: [c-nsp] MRTG a L2TP VPDN Looback Interface
Hi,
We have 7204VXR's with L2TP VPDN traffic servicing DSL users from telco
coming in on a GigEthernet port.
The same port also ships out internet-bound traffic for same users.
Has anyone thoughts on how to determine/poll the VPDN traffic from telco
separately from raw outbound IP traffic?
VPDN tunnels terminate on loopbacks which we have tried to monitor, with
no success. We hoped to subtract this from total in/out traffic on gigE
port and graph results to new chart.
Has anyone a means of getting around this?
Thanks.
Mark.
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-bba mailing list
cisco-bba@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-bba