Hey all,
I have just installed a xen on a fc4 box following the guide at:
http://www.fedoraproject.org/wiki/FedoraXenQuickstart It works fine but I
get the following errors when starting a client is starting up:
"WARNING: couldn't open /etc/fstab: No such file or directory
warning: can't open /etc/fstab: No such file or directory
mount: can't find / in /etc/fstab or /etc/mtab
Mounting local filesystems: warning: can't open /etc/fstab: No such file
or directory
Enabling swap space: swapon: cannot open /etc/fstab: No such file or
directory
Checking for new hardwaremodprobe: FATAL: Could not load
/lib/modules/2.6.12-1.1387_FC4xen0/modules.dep: No such file or directory
modprobe: FATAL: Could not load
/lib/modules/2.6.12-1.1387_FC4xen0/modules.dep: No such file or directory
mmap /dev/mem: Resource temporarily unavailable
modprobe: FATAL: Could not load
/lib/modules/2.6.12-1.1387_FC4xen0/modules.dep: No such file or directory
[ OK ]
Starting pcmcia: Starting PCMCIA services: FATAL: Could not load
/lib/modules/2.6.12-1.1387_FC4xen0/modules.dep: No such file or directory
[FAILED]"
I'm assuming this is to do with an incorrectly set up mount point on my
part. My physical disk is set up as follows:
hda1 - 512mb /boot
hda2 - 1gb swap
hda3 - Rest /
The releavent line in the config file is as follows:
disk = ['file:/root/fedora.img,hda3,rw']
My Host machine's /etc/fstab reads as follows:
LABEL=/ / ext3 defaults 1 1
LABEL=/boot /boot ext3 defaults 1 2
/dev/devpts /dev/pts devpts gid=5,mode=620 0 0
/dev/shm /dev/shm tmpfs defaults 0 0
/dev/proc /proc proc defaults 0 0
/dev/sys /sys sysfs defaults 0 0
LABEL=SWAP-hda2 swap swap defaults 0 0
/dev/hda3 / ext3 defaults 1 1
none /dev/pts devpts gid=5,mode=620 0 0
none /dev/shm tmpfs defaults 0 0
none /proc proc defaults 0 0
none /sys sysfs defaults 0 0
The virtual machine dosn't have a /etc/fstab file.
Obviously at some point during this process I have screwed something up
with the mounts, etc if someone could point me in the correct direction I
would be hugely appreciative.
Cheers
Jona
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users
I have just installed a xen on a fc4 box following the guide at:
http://www.fedoraproject.org/wiki/FedoraXenQuickstart It works fine but I
get the following errors when starting a client is starting up:
"WARNING: couldn't open /etc/fstab: No such file or directory
warning: can't open /etc/fstab: No such file or directory
mount: can't find / in /etc/fstab or /etc/mtab
Mounting local filesystems: warning: can't open /etc/fstab: No such file
or directory
Enabling swap space: swapon: cannot open /etc/fstab: No such file or
directory
Checking for new hardwaremodprobe: FATAL: Could not load
/lib/modules/2.6.12-1.1387_FC4xen0/modules.dep: No such file or directory
modprobe: FATAL: Could not load
/lib/modules/2.6.12-1.1387_FC4xen0/modules.dep: No such file or directory
mmap /dev/mem: Resource temporarily unavailable
modprobe: FATAL: Could not load
/lib/modules/2.6.12-1.1387_FC4xen0/modules.dep: No such file or directory
[ OK ]
Starting pcmcia: Starting PCMCIA services: FATAL: Could not load
/lib/modules/2.6.12-1.1387_FC4xen0/modules.dep: No such file or directory
[FAILED]"
I'm assuming this is to do with an incorrectly set up mount point on my
part. My physical disk is set up as follows:
hda1 - 512mb /boot
hda2 - 1gb swap
hda3 - Rest /
The releavent line in the config file is as follows:
disk = ['file:/root/fedora.img,hda3,rw']
My Host machine's /etc/fstab reads as follows:
LABEL=/ / ext3 defaults 1 1
LABEL=/boot /boot ext3 defaults 1 2
/dev/devpts /dev/pts devpts gid=5,mode=620 0 0
/dev/shm /dev/shm tmpfs defaults 0 0
/dev/proc /proc proc defaults 0 0
/dev/sys /sys sysfs defaults 0 0
LABEL=SWAP-hda2 swap swap defaults 0 0
/dev/hda3 / ext3 defaults 1 1
none /dev/pts devpts gid=5,mode=620 0 0
none /dev/shm tmpfs defaults 0 0
none /proc proc defaults 0 0
none /sys sysfs defaults 0 0
The virtual machine dosn't have a /etc/fstab file.
Obviously at some point during this process I have screwed something up
with the mounts, etc if someone could point me in the correct direction I
would be hugely appreciative.
Cheers
Jona
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users