Hi again
I have the following when i do a ifconfig in
domain0.
eth1 Link encap:Ethernet HWaddr
00:02:2D:01:B2:61
inet addr:192.168.5.252 Bcast:192.168.5.255
Mask:255.255.255.0
inet6 addr: fe80::202:2dff:fe01:b261/64
Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500
Metric:1
RX packets:9222 errors:0 dropped:0
overruns:0 frame:0
TX packets:6838 errors:1 dropped:0
overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:5864623 (5.5 Mb) TX bytes:1346445
(1.2 Mb)
Interrupt:3 Base address:0x100
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4796 errors:0 dropped:0
overruns:0 frame:0
TX packets:4796 errors:0 dropped:0
overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:329687 (321.9 Kb) TX bytes:329687
(321.9 Kb)
vif3.0 Link encap:Ethernet HWaddr
FE:FF:FF:FF:FF:FF
inet addr:192.168.5.251 Bcast:192.168.5.255
Mask:255.255.255.0
inet6 addr: fe80::fcff:ffff:feff:ffff/64
Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500
Metric:1
RX packets:0 errors:0 dropped:0 overruns:0
frame:0
TX packets:15 errors:0 dropped:2 overruns:0
carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:1458 (1.4 Kb)
And here is what i have when i do an ifconfig on the
guest
:/etc# ifconfig
lo Link encap:Local Loopback
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0
frame:0
TX packets:0 errors:0 dropped:0 overruns:0
carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
how can i setup the ethernet interface on the guest
OS? I cant even ping the "lo" on the guest debian os.
it gives me this
:/etc# ping 127.0.0.1
PING 127.0.0.1 (127.0.0.1): 56 data bytes
ping: sendto: Network is unreachable
ping: wrote 127.0.0.1 64 chars, ret=-1
ping: sendto: Network is unreachable
ping: wrote 127.0.0.1 64 chars, ret=-1
ping: sendto: Network is unreachable
ping: wrote 127.0.0.1 64 chars, ret=-1
ping: sendto: Network is unreachable
ping: wrote 127.0.0.1 64 chars, ret=-1
ping: sendto: Network is unreachable
ping: wrote 127.0.0.1 64 chars, ret=-1
ping: sendto: Network is unreachable
ping: wrote 127.0.0.1 64 chars, ret=-1
Timer ISR: Time went backwards: -8769000 7247450000000
1231000 7247460000000
--- 127.0.0.1 ping statistics ---
6 packets transmitted, 0 packets received, 100% packet
loss
please help!!!
regards
JIT
__________________________________
Do you Yahoo!?
Yahoo! Small Business - Try our new Resources site
http://smallbusiness.yahoo.com/resources/
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users
I have the following when i do a ifconfig in
domain0.
eth1 Link encap:Ethernet HWaddr
00:02:2D:01:B2:61
inet addr:192.168.5.252 Bcast:192.168.5.255
Mask:255.255.255.0
inet6 addr: fe80::202:2dff:fe01:b261/64
Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500
Metric:1
RX packets:9222 errors:0 dropped:0
overruns:0 frame:0
TX packets:6838 errors:1 dropped:0
overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:5864623 (5.5 Mb) TX bytes:1346445
(1.2 Mb)
Interrupt:3 Base address:0x100
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4796 errors:0 dropped:0
overruns:0 frame:0
TX packets:4796 errors:0 dropped:0
overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:329687 (321.9 Kb) TX bytes:329687
(321.9 Kb)
vif3.0 Link encap:Ethernet HWaddr
FE:FF:FF:FF:FF:FF
inet addr:192.168.5.251 Bcast:192.168.5.255
Mask:255.255.255.0
inet6 addr: fe80::fcff:ffff:feff:ffff/64
Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500
Metric:1
RX packets:0 errors:0 dropped:0 overruns:0
frame:0
TX packets:15 errors:0 dropped:2 overruns:0
carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:1458 (1.4 Kb)
And here is what i have when i do an ifconfig on the
guest
:/etc# ifconfig
lo Link encap:Local Loopback
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0
frame:0
TX packets:0 errors:0 dropped:0 overruns:0
carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
how can i setup the ethernet interface on the guest
OS? I cant even ping the "lo" on the guest debian os.
it gives me this
:/etc# ping 127.0.0.1
PING 127.0.0.1 (127.0.0.1): 56 data bytes
ping: sendto: Network is unreachable
ping: wrote 127.0.0.1 64 chars, ret=-1
ping: sendto: Network is unreachable
ping: wrote 127.0.0.1 64 chars, ret=-1
ping: sendto: Network is unreachable
ping: wrote 127.0.0.1 64 chars, ret=-1
ping: sendto: Network is unreachable
ping: wrote 127.0.0.1 64 chars, ret=-1
ping: sendto: Network is unreachable
ping: wrote 127.0.0.1 64 chars, ret=-1
ping: sendto: Network is unreachable
ping: wrote 127.0.0.1 64 chars, ret=-1
Timer ISR: Time went backwards: -8769000 7247450000000
1231000 7247460000000
--- 127.0.0.1 ping statistics ---
6 packets transmitted, 0 packets received, 100% packet
loss
please help!!!
regards
JIT
__________________________________
Do you Yahoo!?
Yahoo! Small Business - Try our new Resources site
http://smallbusiness.yahoo.com/resources/
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users