I have similar problem. but connection doesn't die - it just won't pass any
traffic through it
log from debug mode: if someone can decrypt it
$sudo vpnc --natt-mode force-natt --debug 2
Enter PIN for myaccount@vpn.myoffice.com: 9338
Enter password for myaccount@vpn.myoffice.com: 547714
vpnc version 0.5.3-464M
S1 init_sockaddr
[2012-01-24 23:01:30]
S2 make_socket
[2012-01-24 23:01:30]
S3 setup_tunnel
[2012-01-24 23:01:30]
using interface tun0
S4 do_phase1_am
[2012-01-24 23:01:30]
S4.1 create_nonce
[2012-01-24 23:01:30]
S4.2 dh setup
[2012-01-24 23:01:30]
S4.3 AM packet_1
[2012-01-24 23:01:30]
S4.4 AM_packet2
[2012-01-24 23:01:33]
(Nortel Contivity)
IKE SA selected psk-3des-sha1
NAT status: no NAT-T VID seen
S4.5 AM_packet3
[2012-01-24 23:01:33]
S4.6 cleanup
[2012-01-24 23:01:33]
S5 do_phase2_xauth [1]
[2012-01-24 23:01:33]
S5.1 xauth_request
[2012-01-24 23:01:33]
S5.2 notice_check
[2012-01-24 23:01:33]
S5.3 type-is-xauth check
[2012-01-24 23:01:33]
S5.4 xauth type check
[2012-01-24 23:01:33]
S5.5 do xauth reply
[2012-01-24 23:01:33]
S5.2 notice_check
[2012-01-24 23:01:33]
S5.3 type-is-xauth check
[2012-01-24 23:01:33]
S5.6 process xauth set
[2012-01-24 23:01:33]
S5.8 xauth done
[2012-01-24 23:01:33]
S6 do_phase2_config [1]
[2012-01-24 23:01:33]
S6.2 phase2_config receive modecfg
[2012-01-24 23:01:34]
unknown attribute 6 / 0x6
unknown attribute 16392 / 0x4008
unknown attribute 16393 / 0x4009
unknown attribute 16394 / 0x400A
unknown attribute 16396 / 0x400C
unknown attribute 16409 / 0x4019
unknown attribute 16398 / 0x400E
unknown attribute 16397 / 0x400D
unknown attribute 16397 / 0x400D
unknown attribute 16403 / 0x4013
unknown attribute 16400 / 0x4010
got address 10.127.240.8
S6 do_phase2
[2012-01-24 23:01:34]
do_phase2: S7.5 QM_packet2 check reject offer
[2012-01-24 23:01:34]
do_phase2: S7.6 QM_packet2 check and process proposal
[2012-01-24 23:01:34]
got ipsec lifetime attributes: 28800 seconds
IPSEC SA selected 3des-md5
do_phase2: S7.1 QM_packet1
[2012-01-24 23:01:34]
get_spi: 151.193.128.253 -> 192.168.1.4, spi 0x82f2e09a
do_phase2: S7.7 QM_packet3 sent - run script
[2012-01-24 23:01:34]
S7 setup_link (phase 2 + main_loop)
[2012-01-24 23:01:34]
S7.0 run interface setup script
[2012-01-24 23:01:34]
add host 151.193.128.253: gateway 192.168.1.1
delete net default
add net default: gateway 10.127.240.8
S7.8 setup ipsec tunnel
[2012-01-24 23:01:34]
S7.9 main loop (receive and transmit ipsec packets)
[2012-01-24 23:01:34]
remote -> local spi: 0x9ae0f282
local -> remote spi: 0xea9da18c
VPNC started in background (pid: 945)...
If someone would give me a hint, what is the problem with it, i'll be very
appreciated
What other options to try?
Regards
Victor
On 24 January 2012 02:00, phil swenson <phil.swenson@gmail.com> wrote:
> I finally got back to trying vpnc for mac/lion as described here:
> http://www.macfreek.nl/memory/VPNC_for_Nortel_on_Mac
>
> It gives me some output as:
>
> add net XXXX gateway: YYYYY
> add host ZZZZZ gateway 10.0.1.1
> delete net default
> add net default gateway AAAAAA
> VPNC starts in background(pid: 4531)…
>
>
> but it appears to die very quickly with no output.
>
> I tried with --natt-mode force-natt
> but this didn't appear to make any difference.
>
> thoughts?
>
> thanks
> phil
> _______________________________________________
> vpnc-devel mailing list
> vpnc-devel@unix-ag.uni-kl.de
> https://lists.unix-ag.uni-kl.de/mailman/listinfo/vpnc-devel
> http://www.unix-ag.uni-kl.de/~massar/vpnc/
>