3.75 is a bug fix release for 3.74.
Changes in 3.75:
* PXELINUX: fix the "keeppxe" option, which was broken in
3.74.
* MEMDISK: correct the extraction of geometry information from
the MBR of a hard disk image, again broken in 3.74.
* extlinux(1) man page from Brian Pellin.
* Simple menu: MENU SAVE is now controllable on a menu-by-menu
or entry-by-entry basis.
* gPXELINUX: fix interrupt-disabling bug.
* HDT: fix lockup on machines with certain PCI configurations.
Changes in 3.74:
* New UI directive, which allows a more natural way to specify
a menu system (or not.) With the UI directive specifying
the menu system, the DEFAULT directive can be used to select
the default entry inside the menus.
* kbdmap.c32: new module to load a new keyboard map
dynamically.
* isohybrid: workaround bug in some versions of binutils.
* Fix issue with the placement of the initrd on some machines.
* ifcpu64: fix handling of less than three arguments.
* Fix bug in the shuffle library when dealing with a very
large number of fragments.
* Documentation fixes by Vicente Jimenez Aguilar.
* gPXE updated to version 0.9.7.
* hdt.c32: Hardware Detection Tool, an interactive hardware
analyzer module by Erwan Velu.
* MEMDISK: enable automatic determination of the disk geometry
for a large floppy disk image if (and only if) it is
formatted with a FAT filesystem.
* SYSLINUX: fix the handling of .bss files on FAT12/16.
* Suppress the Loading ... message if "quiet" is specified on
the kernel command line.
* Fix the use of "CONSOLE 0" with menu.c32.
* Allow COM32 modules to be aware of all memory even in the
presence of a memory hole. The "linux.c32" module can be
used to load a kernel (or memdisk) plus large initrd on
such a system.
* MBR: produce alternate MBR variants which force the drive
number to hd0 (_f variants), or force the drive number to
hd0 if the Ctrl key is pressed (_c variants.) Furthermore,
add an MBR variant (altmbr*.bin) which ignores the active
flag and instead boots the partition number specified in the
byte at offset 439 decimal.
* Add IPAPPEND strings to com32 modules, especially needed for
linux.c32.
* New MENU SAVE directive which saves the latest menu
selection until the next boot. Currently only implemented for
EXTLINUX.
* gfxboot.com: *experimental* interface module to Steffen
Winterfeldt's "gfxboot" graphical front end
(http://gfxboot.sourceforge.net/). Module by Sebastian Herbszt.
Begin3
Title: syslinux
Version: 3.75
Entered-date: 2009-04-16
Description: SYSLINUX is a collection of boot loaders for the Linux
operating system which operates off Linux ext2/3
filesystems, MS-DOS FAT filesystems, network servers
using PXE firmware, or from CD-ROMs. The FAT
filesystem version can be installed from DOS, NT, or
Linux.
It includes a sophisticated API for add-on "COM32"
modules, including a significant subset of the
standard C library.
It also includes MEMDISK, a tool to boot legacy
operating systems from nontraditional media like PXE
or CD-ROM.
This version includes gPXE, to allow accessing network
files via other protocols than TFTP.
Keywords: syslinux pxelinux isolinux extlinux msdos boot loader
floppy install network ext2 ext3 pxe iso9660 cdfs
memdisk com32
Author: hpa@zytor.com (H. Peter Anvin)
Maintained-by: hpa@zytor.com (H. Peter Anvin)
Primary-site: ftp.kernel.org /pub/linux/utils/boot/syslinux
3784220 syslinux-3.75.tar.gz
4669899 syslinux-3.75.zip
Platforms: DOS or Linux to install. Linux, perl and nasm 0.98.39 or
later required to build from source.
Copying-policy: GPL
End
--
H. Peter Anvin, Intel Open Source Technology Center
I work for Intel. I don't speak on their behalf.
_______________________________________________
SYSLINUX-announce mailing list
SYSLINUX-announce@zytor.com
http://zytor.com/mailman/listinfo/syslinux-announce
Changes in 3.75:
* PXELINUX: fix the "keeppxe" option, which was broken in
3.74.
* MEMDISK: correct the extraction of geometry information from
the MBR of a hard disk image, again broken in 3.74.
* extlinux(1) man page from Brian Pellin.
* Simple menu: MENU SAVE is now controllable on a menu-by-menu
or entry-by-entry basis.
* gPXELINUX: fix interrupt-disabling bug.
* HDT: fix lockup on machines with certain PCI configurations.
Changes in 3.74:
* New UI directive, which allows a more natural way to specify
a menu system (or not.) With the UI directive specifying
the menu system, the DEFAULT directive can be used to select
the default entry inside the menus.
* kbdmap.c32: new module to load a new keyboard map
dynamically.
* isohybrid: workaround bug in some versions of binutils.
* Fix issue with the placement of the initrd on some machines.
* ifcpu64: fix handling of less than three arguments.
* Fix bug in the shuffle library when dealing with a very
large number of fragments.
* Documentation fixes by Vicente Jimenez Aguilar.
* gPXE updated to version 0.9.7.
* hdt.c32: Hardware Detection Tool, an interactive hardware
analyzer module by Erwan Velu.
* MEMDISK: enable automatic determination of the disk geometry
for a large floppy disk image if (and only if) it is
formatted with a FAT filesystem.
* SYSLINUX: fix the handling of .bss files on FAT12/16.
* Suppress the Loading ... message if "quiet" is specified on
the kernel command line.
* Fix the use of "CONSOLE 0" with menu.c32.
* Allow COM32 modules to be aware of all memory even in the
presence of a memory hole. The "linux.c32" module can be
used to load a kernel (or memdisk) plus large initrd on
such a system.
* MBR: produce alternate MBR variants which force the drive
number to hd0 (_f variants), or force the drive number to
hd0 if the Ctrl key is pressed (_c variants.) Furthermore,
add an MBR variant (altmbr*.bin) which ignores the active
flag and instead boots the partition number specified in the
byte at offset 439 decimal.
* Add IPAPPEND strings to com32 modules, especially needed for
linux.c32.
* New MENU SAVE directive which saves the latest menu
selection until the next boot. Currently only implemented for
EXTLINUX.
* gfxboot.com: *experimental* interface module to Steffen
Winterfeldt's "gfxboot" graphical front end
(http://gfxboot.sourceforge.net/). Module by Sebastian Herbszt.
Begin3
Title: syslinux
Version: 3.75
Entered-date: 2009-04-16
Description: SYSLINUX is a collection of boot loaders for the Linux
operating system which operates off Linux ext2/3
filesystems, MS-DOS FAT filesystems, network servers
using PXE firmware, or from CD-ROMs. The FAT
filesystem version can be installed from DOS, NT, or
Linux.
It includes a sophisticated API for add-on "COM32"
modules, including a significant subset of the
standard C library.
It also includes MEMDISK, a tool to boot legacy
operating systems from nontraditional media like PXE
or CD-ROM.
This version includes gPXE, to allow accessing network
files via other protocols than TFTP.
Keywords: syslinux pxelinux isolinux extlinux msdos boot loader
floppy install network ext2 ext3 pxe iso9660 cdfs
memdisk com32
Author: hpa@zytor.com (H. Peter Anvin)
Maintained-by: hpa@zytor.com (H. Peter Anvin)
Primary-site: ftp.kernel.org /pub/linux/utils/boot/syslinux
3784220 syslinux-3.75.tar.gz
4669899 syslinux-3.75.zip
Platforms: DOS or Linux to install. Linux, perl and nasm 0.98.39 or
later required to build from source.
Copying-policy: GPL
End
--
H. Peter Anvin, Intel Open Source Technology Center
I work for Intel. I don't speak on their behalf.
_______________________________________________
SYSLINUX-announce mailing list
SYSLINUX-announce@zytor.com
http://zytor.com/mailman/listinfo/syslinux-announce