Mailing List Archive: fusion QFX5120 and MX204

fusion QFX5120 and MX204

Apr 12, 2019, 1:10 PM

Post #1 of 3 (1207 views)

Trying to do fusion from MX204 (AD) to QFX5120-48Y-8C (SD). but getting this
message.. "Satellite image not available"

Is a QFX5120-48Y-8C capable of being a satellite device in fusion ? On
juniper.net I see lots of satellite images for qfx5100, ex4300, ex2300,
qfx5110, .but nothing for QFX5120

agould@lab-mx204> show chassis satellite detail

Satellite Alias: _sd141

FPC Slot: 141

Operational State: Standalone

Product Model: QFX5120-48Y-8C

Serial number: 123456789012

Device Reachability: None

Mode change state: Mode change not initiated. Satellite image not available
(model QFX5120-48Y-8C)

System id: b0:33:44:33:22:11

Software package version: 18.3R1.11

Cascade interfaces:

Interface Name: et-0/0/3 State: present

Uplink Interface: et-141/0/55

Last transition: 3w2d 05:22:43

Adjacency down count: 0

Rx Packet: 34 Last received packet: 00:00:06

-Aaron

_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp

Re: fusion QFX5120 and MX204 [ In reply to ]

lists at tobias-heister

Apr 13, 2019, 5:38 AM

Post #2 of 3 (1202 views)

Permalink

Hi,

Am 12.04.2019 um 22:10 schrieb Aaron Gould:
> Trying to do fusion from MX204 (AD) to QFX5120-48Y-8C (SD). but getting this
> message.. "Satellite image not available"
>
>
>
> Is a QFX5120-48Y-8C capable of being a satellite device in fusion ?

Not yet. https://www.juniper.net/documentation/en_US/junos/topics/concept/fusion-components.html

Fusion PE supports EX4300, QFX5100/5110 and QFX5200

Interesting side Note on QFX5200 being supported as Satellite and my favorite Fun Fact on Fusion PE. MX80 is supported as AD and QFX5200 is supported as SAT.
This allows us to build the most useless router in the world with 248x100GE Interfaces (31x100GE on 8 QFX5200) + 24x10GE Interfaces (1x100GE broken into 3x10GE + 1x10GE for AD Connectivity) with a oversubscription factor of at least 2483:1 per SAT and MX80 control plane. The worst of all worlds!

Similar Math applies to MX104 as AD.

--
Kind Regards
Tobias Heister
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp

Re: fusion QFX5120 and MX204 [ In reply to ]

sander at steffann

Apr 13, 2019, 12:12 PM

Post #3 of 3 (1202 views)

Permalink

Hi,

> Am 12.04.2019 um 22:10 schrieb Aaron Gould:
>> Trying to do fusion from MX204 (AD) to QFX5120-48Y-8C (SD). but getting this
>> message.. "Satellite image not available"
>> Is a QFX5120-48Y-8C capable of being a satellite device in fusion ?
>
> Not yet. https://www.juniper.net/documentation/en_US/junos/topics/concept/fusion-components.html
>
> Fusion PE supports EX4300, QFX5100/5110 and QFX5200
>
> Interesting side Note on QFX5200 being supported as Satellite and my favorite Fun Fact on Fusion PE. MX80 is supported as AD and QFX5200 is supported as SAT.
> This allows us to build the most useless router in the world with 248x100GE Interfaces (31x100GE on 8 QFX5200) + 24x10GE Interfaces (1x100GE broken into 3x10GE + 1x10GE for AD Connectivity) with a oversubscription factor of at least 2483:1 per SAT and MX80 control plane. The worst of all worlds!

Haha! That would indeed be a useless combination :)
I think I'll stick with my MX10003 instead :)

Cheers,
Sander

Mailing List Archive

Mailing List Archive

Attached Files: