On Wed, Aug 13, 2003 at 01:34:39PM -0700, billp wrote:
> Quick (dumb) question-- we are picking up some used PICs, and just
> want to verify:
>
> PE- M5/M10 card, has port ejector, will work/screw down on M20/M40 FPC
> P- M20/M40 card, will work/screw down on M20/M40 FPC
> PB- M40e/M160 -- will this work in an M20/M40? Different backplane?
P and PE cards are exactly the same, but the PE has an ejector handle. P
will fit in M5/M10 (though not gracefully, be careful with the pins) as
long as you prepare "some other method" for removal. Also, you can
hot-swap M20/M40 PICs just like M5/M10s if you arrange for PIC removal
through "some other method" than pulling out the FPC. Just offline it in
software first.
I haven't ever tested a PE in an M20 FPC, so I have no idea if that would
work or if the ejector would get in the way.
PB cards for FPC1 are physically the same hardware as P and PE, though the
face place is so different as to be not directly usable. You can unscrew
it and switch it out with a P/PE faceplate though. PB cards for FPC2
however will not work in FPC1's.
--
Richard A Steenbergen <ras@e-gerbil.net>
http://www.e-gerbil.net/ras GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC)