In the NetIron Config guide there's a section entitled "Configuring
802.1q-in-q tagging" that has an example. But it seems you can't take
customer untagged traffic on one port and send it out double-tagged another
port. You seem to have to use an intermediate device to do the initial tag.
Frank
-----Original Message-----
From: Herro91 [mailto:herro91@gmail.com]
Sent: Monday, March 10, 2014 4:41 PM
To: nanog@nanog.org; foundry-nsp@puck.nether.net
Subject: Seeking config for QinQ/802.1ad on Brocade MLX
Hello All,
I am trying to find an example config on how to configure QinQ/802.1ad/PB
on the Brocade MLX8 platform.
I have found some basic examples for PBB/Mac in Mac, but not a complete
config for 802.1ad
Can anyone on the list help?
Thanks!
_______________________________________________
foundry-nsp mailing list
foundry-nsp@puck.nether.net
http://puck.nether.net/mailman/listinfo/foundry-nsp
802.1q-in-q tagging" that has an example. But it seems you can't take
customer untagged traffic on one port and send it out double-tagged another
port. You seem to have to use an intermediate device to do the initial tag.
Frank
-----Original Message-----
From: Herro91 [mailto:herro91@gmail.com]
Sent: Monday, March 10, 2014 4:41 PM
To: nanog@nanog.org; foundry-nsp@puck.nether.net
Subject: Seeking config for QinQ/802.1ad on Brocade MLX
Hello All,
I am trying to find an example config on how to configure QinQ/802.1ad/PB
on the Brocade MLX8 platform.
I have found some basic examples for PBB/Mac in Mac, but not a complete
config for 802.1ad
Can anyone on the list help?
Thanks!
_______________________________________________
foundry-nsp mailing list
foundry-nsp@puck.nether.net
http://puck.nether.net/mailman/listinfo/foundry-nsp