Mailing List Archive

Hi Matthias,
Our devices only run at the standard VTY100 9800 bps; we don't support changing this to a lower or higher setting.

All the technical bits on the serial console are actually in the device's hardware install guide (not our config guides). We try to keep folks on their tows :)

What terminal server are you using? Minicom or Terraterm? Have you tried adjusting the speed on the terminal server end?

Wilbur

Sent from my iPad

> On Dec 6, 2013, at 6:04 AM, "Matthias Cramer" <matthias.cramer@iway.ch> wrote:
>
> Hi All
>
> I feel somewhat stupid at the moment... I searched on the web and in Brocades documentation for an hour now,
> but can find no hint in how to change the speed of the serial console.
>
> Can anyone help me with this ?
>
> Regards
>
> Matthias
>
>
> --
> Matthias Cramer / mc322-ripe Senior Network & Security Engineer
> iway AG Phone +41 43 500 1111
> Badenerstrasse 569 Fax +41 44 271 3535
> CH-8048 Zürich http://www.iway.ch/
> GnuPG 1024D/2D208250 = DBC6 65B6 7083 1029 781E 3959 B62F DF1C 2D20 8250
>
> <signature.asc>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp@puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp

_______________________________________________
foundry-nsp mailing list
foundry-nsp@puck.nether.net
http://puck.nether.net/mailman/listinfo/foundry-nsp

On 07/12/2013 04:03, Wilbur Smith wrote:
> Our devices only run at the standard VTY100 9800 bps; we don't support
> changing this to a lower or higher setting.

I could never figure out why. Every single rs232 uart produced in the last
20 years has supported up to 115200 bps. The situations where I typically
end up using the console are initial box installation, certain types of
debugging and OOB network rescue. In all these situations, 9600 is a drag.

Nick

_______________________________________________
foundry-nsp mailing list
foundry-nsp@puck.nether.net
http://puck.nether.net/mailman/listinfo/foundry-nsp