Hi,
I am trying to deploy 1 Gigabit Ethernet on VMware with Extreme BD-8810
(ExtremeXOS version 12.0.1.11), however the port always negotiate at
100Mbps instead. If I try to set the port at 1Gbps I lost connectivity.
#configure ports 7:11 auto on speed 1000 duplex full
The cable was tested and it's fine. I've changed the port, but I still have
the same problem. I have tried to set up the VMware to 1Gbps, but I lost
connectivity.
This is the print of my port configuration:
SW_CORE.4 # show ports 7:11 configuration no-refresh
Port Configuration
Port Virtual Port Link Auto Speed Duplex Flow Load
Media
router State State Neg Cfg Actual Cfg Actual Cntrl Master Pri
Red
================================================================================
7:11 VR-Default E R ON AUTO AUTO UTP
================================================================================
It could be the VMware NIC, but I look at my log and although the port 7:11
doesn't appear there, I have many 1Gbps ports flapping.
* SW_CORE.5 # show log
04/12/2013 15:22:20.51 <Info:vlan.dbg.info> MSM-A: Port 8:6 link up at 1
Gbps speed and full-duplex
04/12/2013 15:22:18.05 <Info:vlan.dbg.info> MSM-A: Port 8:6 link down
04/12/2013 15:21:11.44 <Info:vlan.dbg.info> MSM-A: Port 7:32 link up at 1
Gbps speed and full-duplex
04/12/2013 15:21:09.06 <Info:vlan.dbg.info> MSM-A: Port 7:32 link down
04/12/2013 15:20:20.15 <Info:AAA.logout> MSM-A: User epicenter logout from
telnet (10.100.80.53)
04/12/2013 15:20:09.78 <Info:AAA.authPass> MSM-A: Login passed for user
epicenter through telnet (10.100.80.53)
04/12/2013 15:19:31.42 <Info:vlan.dbg.info> MSM-A: Port 8:6 link up at 1
Gbps speed and full-duplex
04/12/2013 15:19:28.88 <Info:vlan.dbg.info> MSM-A: Port 8:6 link down
04/12/2013 15:18:22.38 <Info:vlan.dbg.info> MSM-A: Port 7:32 link up at 1
Gbps speed and full-duplex
04/12/2013 15:18:19.90 <Info:vlan.dbg.info> MSM-A: Port 7:32 link down
04/12/2013 15:16:42.12 <Info:vlan.dbg.info> MSM-A: Port 8:6 link up at 1
Gbps speed and full-duplex
04/12/2013 15:16:39.71 <Info:vlan.dbg.info> MSM-A: Port 8:6 link down
04/12/2013 15:15:33.13 <Info:vlan.dbg.info> MSM-A: Port 7:32 link up at 1
Gbps speed and full-duplex
04/12/2013 15:15:30.70 <Info:vlan.dbg.info> MSM-A: Port 7:32 link down
04/12/2013 15:13:53.00 <Info:vlan.dbg.info> MSM-A: Port 8:6 link up at 1
Gbps speed and full-duplex
04/12/2013 15:13:50.53 <Info:vlan.dbg.info> MSM-A: Port 8:6 link down
04/12/2013 15:12:44.02 <Info:vlan.dbg.info> MSM-A: Port 7:32 link up at 1
Gbps speed and full-duplex
04/12/2013 15:12:41.46 <Info:vlan.dbg.info> MSM-A: Port 7:32 link down
04/12/2013 15:11:03.93 <Info:vlan.dbg.info> MSM-A: Port 8:6 link up at 1
Gbps speed and full-duplex
04/12/2013 15:11:01.40 <Info:vlan.dbg.info> MSM-A: Port 8:6 link down
04/12/2013 15:09:54.88 <Info:vlan.dbg.info> MSM-A: Port 7:32 link up at 1
Gbps speed and full-duplex
04/12/2013 15:09:52.40 <Info:vlan.dbg.info> MSM-A: Port 7:32 link down
The port configuration for 7:32
SEDE_CORE.2 # show ports 7:32 configuration no-refresh
Port Configuration
Port Virtual Port Link Auto Speed Duplex Flow Load
Media
router State State Neg Cfg Actual Cfg Actual Cntrl Master Pri
Red
================================================================================
7:32 VR-Default E A ON AUTO 1000 AUTO FULL SY/ASY UTP
================================================================================
Then, I not sure if the problem that I have with the VMware is the same
problem that I have with the flapping interfaces. Has anyone experienced
such problem?
Thanks,
Luiz.
I am trying to deploy 1 Gigabit Ethernet on VMware with Extreme BD-8810
(ExtremeXOS version 12.0.1.11), however the port always negotiate at
100Mbps instead. If I try to set the port at 1Gbps I lost connectivity.
#configure ports 7:11 auto on speed 1000 duplex full
The cable was tested and it's fine. I've changed the port, but I still have
the same problem. I have tried to set up the VMware to 1Gbps, but I lost
connectivity.
This is the print of my port configuration:
SW_CORE.4 # show ports 7:11 configuration no-refresh
Port Configuration
Port Virtual Port Link Auto Speed Duplex Flow Load
Media
router State State Neg Cfg Actual Cfg Actual Cntrl Master Pri
Red
================================================================================
7:11 VR-Default E R ON AUTO AUTO UTP
================================================================================
It could be the VMware NIC, but I look at my log and although the port 7:11
doesn't appear there, I have many 1Gbps ports flapping.
* SW_CORE.5 # show log
04/12/2013 15:22:20.51 <Info:vlan.dbg.info> MSM-A: Port 8:6 link up at 1
Gbps speed and full-duplex
04/12/2013 15:22:18.05 <Info:vlan.dbg.info> MSM-A: Port 8:6 link down
04/12/2013 15:21:11.44 <Info:vlan.dbg.info> MSM-A: Port 7:32 link up at 1
Gbps speed and full-duplex
04/12/2013 15:21:09.06 <Info:vlan.dbg.info> MSM-A: Port 7:32 link down
04/12/2013 15:20:20.15 <Info:AAA.logout> MSM-A: User epicenter logout from
telnet (10.100.80.53)
04/12/2013 15:20:09.78 <Info:AAA.authPass> MSM-A: Login passed for user
epicenter through telnet (10.100.80.53)
04/12/2013 15:19:31.42 <Info:vlan.dbg.info> MSM-A: Port 8:6 link up at 1
Gbps speed and full-duplex
04/12/2013 15:19:28.88 <Info:vlan.dbg.info> MSM-A: Port 8:6 link down
04/12/2013 15:18:22.38 <Info:vlan.dbg.info> MSM-A: Port 7:32 link up at 1
Gbps speed and full-duplex
04/12/2013 15:18:19.90 <Info:vlan.dbg.info> MSM-A: Port 7:32 link down
04/12/2013 15:16:42.12 <Info:vlan.dbg.info> MSM-A: Port 8:6 link up at 1
Gbps speed and full-duplex
04/12/2013 15:16:39.71 <Info:vlan.dbg.info> MSM-A: Port 8:6 link down
04/12/2013 15:15:33.13 <Info:vlan.dbg.info> MSM-A: Port 7:32 link up at 1
Gbps speed and full-duplex
04/12/2013 15:15:30.70 <Info:vlan.dbg.info> MSM-A: Port 7:32 link down
04/12/2013 15:13:53.00 <Info:vlan.dbg.info> MSM-A: Port 8:6 link up at 1
Gbps speed and full-duplex
04/12/2013 15:13:50.53 <Info:vlan.dbg.info> MSM-A: Port 8:6 link down
04/12/2013 15:12:44.02 <Info:vlan.dbg.info> MSM-A: Port 7:32 link up at 1
Gbps speed and full-duplex
04/12/2013 15:12:41.46 <Info:vlan.dbg.info> MSM-A: Port 7:32 link down
04/12/2013 15:11:03.93 <Info:vlan.dbg.info> MSM-A: Port 8:6 link up at 1
Gbps speed and full-duplex
04/12/2013 15:11:01.40 <Info:vlan.dbg.info> MSM-A: Port 8:6 link down
04/12/2013 15:09:54.88 <Info:vlan.dbg.info> MSM-A: Port 7:32 link up at 1
Gbps speed and full-duplex
04/12/2013 15:09:52.40 <Info:vlan.dbg.info> MSM-A: Port 7:32 link down
The port configuration for 7:32
SEDE_CORE.2 # show ports 7:32 configuration no-refresh
Port Configuration
Port Virtual Port Link Auto Speed Duplex Flow Load
Media
router State State Neg Cfg Actual Cfg Actual Cntrl Master Pri
Red
================================================================================
7:32 VR-Default E A ON AUTO 1000 AUTO FULL SY/ASY UTP
================================================================================
Then, I not sure if the problem that I have with the VMware is the same
problem that I have with the flapping interfaces. Has anyone experienced
such problem?
Thanks,
Luiz.