Look here:
Slot-1 SummitStack-GZE.9 # configure ports 1:19,1:20 auto off speed 1000
duplex full
Error: Speed change is not allowed on port 1:19 as it is a Trunk member
port.
Configuration failed on backup MSM, command execution aborted!
Slot-1 SummitStack-GZE.10 # configure ports 1:19-20 auto off speed 1000
duplex full
Error: Speed change is not allowed on port 1:19 as it is a Trunk member
port.
Configuration failed on backup MSM, command execution aborted!
I have a configuration where FDX, auto OFF must be configured on trunk
ports (then I have ADVA STM-16-to-2xGE MUX), they already were
configured this way, but after an upgrade something wrong happened.
I can't set it up...
Is it some feature or bug ?
Switch - X650
Regards,
Marcin
_______________________________________________
extreme-nsp mailing list
extreme-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/extreme-nsp
Slot-1 SummitStack-GZE.9 # configure ports 1:19,1:20 auto off speed 1000
duplex full
Error: Speed change is not allowed on port 1:19 as it is a Trunk member
port.
Configuration failed on backup MSM, command execution aborted!
Slot-1 SummitStack-GZE.10 # configure ports 1:19-20 auto off speed 1000
duplex full
Error: Speed change is not allowed on port 1:19 as it is a Trunk member
port.
Configuration failed on backup MSM, command execution aborted!
I have a configuration where FDX, auto OFF must be configured on trunk
ports (then I have ADVA STM-16-to-2xGE MUX), they already were
configured this way, but after an upgrade something wrong happened.
I can't set it up...
Is it some feature or bug ?
Switch - X650
Regards,
Marcin
_______________________________________________
extreme-nsp mailing list
extreme-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/extreme-nsp