Or if you don't have a solaris box at all, there is a java version of ndmpcopy
available at
ftp://ftp.ndmp.org/pub/version.3/contrib/jndmpcopy.tar.gz I used that perviously to move 12gb of data between filers and it worked
without a problem.
Dave
"Chitre, Amol" wrote:
>
>Hello Frank,
>If any of your filers is running Ontap 6.2 or above, then you should be able t
>o use the 'ndmpcopy' command on the filer itself to make the copy. Ndmpcopy wa
>s designed specifically for such migrations, so it pretty much will work.
>
>The other ndmpcopy from ndmp.org that Simon mentioned will also work, but you
>will require to install it on a solaris client machine within your network.
>
>Hope that helps,
>Amol.
>
>*-----Original Message-----
>*From: Clawson, Simon [mailto:simon_clawson@mentorg.com]
>*Sent: Tuesday, November 12, 2002 8:36 AM
>*To: 'Frank Bonnet'; toasters@mathworks.com
>*Subject: RE: filer to filer copy
>*
>*
>*You can use volcopy I believe. This is how we moved our disk
>*storage from
>*SCSI to fibre a while back. Also, ndmp copy, from ndmp.org works well.
>*
>*Simon
>*
>*-----Original Message-----
>*From: Frank Bonnet [mailto:bonnetf@bart.esiee.fr]
>*Sent: 12 November 2002 15:48
>*To: toasters@mathworks.com
>*Subject: filer to filer copy
>*
>*
>*Hi
>*
>*I want to transfert all users data from a F85 to a F87
>*is there some command to "safely" do such transfert
>*I expect tar from a third remote machine would be very
>*slow to do the job.
>*
>*The two filers are attached to the LAN with a gigabit
>*fiber link on the same switch.
>*
>*THX
>*--
>*Frank Bonnet
>*
>