Greetings,
Has anybody upgraded to Ontap 7mode 8.2.5 on FAS8020? I do have a case in,
but as you can imagine it is moving slowly. I dont yet feel the need to
start screaming.
The Ontap update is autoupdating the SP to 3.0.4, and causing some issues:
sp.device.fw.mismatch:warning]: Device firmware version mismatch detected:
eth_switch:Rev:2,Img:3-mismatch
Couple of oddities with this:
There isn't a 3.0.4 SP firmware available via netapp website nor is it
documented in the SP matrix
https://mysupport.netapp.com/NOW/cgi-bin/fw?platform=FAS8020&type=sp_ontap&plattype=&fs=
https://mysupport.netapp.com/NOW/download/tools/serviceimage/support/ServiceProcessorSupportMatrix.shtml
I've gone into debug mode and issued
SP netapp01*> sp switch-update
Which seems to have worked, but the new error then becomes:
sp.device.fw.mismatch:warning]: Device firmware version mismatch detected:
12:Rev:fan,Img:-mismatch
So I presume I should run:
SP netapp01*> system fan update
Warning: system sensors monitor and system sensors thermal-mgmt should be
disabled both on this controller and partner controller (if installed).
Continue? [y/n]
At which point I thought it best to figure out exactly what is going on
here.
I think the following message might be related.
monitor.temp.unreadable:info]: The controller temperature (CPU0 Temp
Margin) is not readable.
Regards,
Douglas
Has anybody upgraded to Ontap 7mode 8.2.5 on FAS8020? I do have a case in,
but as you can imagine it is moving slowly. I dont yet feel the need to
start screaming.
The Ontap update is autoupdating the SP to 3.0.4, and causing some issues:
sp.device.fw.mismatch:warning]: Device firmware version mismatch detected:
eth_switch:Rev:2,Img:3-mismatch
Couple of oddities with this:
There isn't a 3.0.4 SP firmware available via netapp website nor is it
documented in the SP matrix
https://mysupport.netapp.com/NOW/cgi-bin/fw?platform=FAS8020&type=sp_ontap&plattype=&fs=
https://mysupport.netapp.com/NOW/download/tools/serviceimage/support/ServiceProcessorSupportMatrix.shtml
I've gone into debug mode and issued
SP netapp01*> sp switch-update
Which seems to have worked, but the new error then becomes:
sp.device.fw.mismatch:warning]: Device firmware version mismatch detected:
12:Rev:fan,Img:-mismatch
So I presume I should run:
SP netapp01*> system fan update
Warning: system sensors monitor and system sensors thermal-mgmt should be
disabled both on this controller and partner controller (if installed).
Continue? [y/n]
At which point I thought it best to figure out exactly what is going on
here.
I think the following message might be related.
monitor.temp.unreadable:info]: The controller temperature (CPU0 Temp
Margin) is not readable.
Regards,
Douglas