AMD64, 2.6.35-23 (ubuntu), hvr1600 w/ TCL M30WTP-4N-E tuner
OTA Digital works great out-of the-box. Analog has been a pita though. I've
tried forcing the tuner to a known working channel and dumped the mpeg
stream to a file for review. Everything turns up with a blank red screen.
Tried setting vmalloc=256M just for fun (it didn't seem to be a necessity)
but same results. Using mythtv's channel scanner, every single channel
scanned locks and is added to the database. Not even the channels that
should be working show up in LiveTV, though - just blank red screen. There
is no cable box involved here and the cable works just fine otherwise.
dmsg| grep cx18
[ 23.370875] cx18: Start initialization, version 1.4.0
[ 23.370912] cx18-0: Initializing card 0
[ 23.370916] cx18-0: Autodetected Hauppauge card
[ 23.370990] cx18 0000:02:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 23.376071] cx18-0: cx23418 revision 01010000 (B)
[ 23.628748] cx18-0: Autodetected Hauppauge HVR-1600
[ 23.628750] cx18-0: Simultaneous Digital and Analog TV capture supported
[ 25.250796] tuner 2-0043: chip found @ 0x86 (cx18 i2c driver #0-1)
[ 25.416319] tuner 2-0061: chip found @ 0xc2 (cx18 i2c driver #0-1)
[ 25.691922] cs5345 1-004c: chip found @ 0x98 (cx18 i2c driver #0-0)
[ 26.646320] cx18-0: Registered device video0 for encoder MPEG (64 x 32.00
kB)
[ 26.646324] DVB: registering new adapter (cx18)
[ 27.293734] cx18-0: DVB Frontend registered
[ 27.293737] cx18-0: Registered DVB adapter0 for TS (32 x 32.00 kB)
[ 27.293767] cx18-0: Registered device video32 for encoder YUV (20 x
101.25 kB)
[ 27.293795] cx18-0: Registered device vbi0 for encoder VBI (20 x 51984
bytes)
[ 27.293820] cx18-0: Registered device video24 for encoder PCM audio (256
x 4.00 kB)
[ 27.293823] cx18-0: Initialized card: Hauppauge HVR-1600
[ 27.293845] cx18: End initialization
[ 27.604590] cx18-alsa: module loading...
[ 28.455730] cx18-0: loaded v4l-cx23418-cpu.fw firmware (158332 bytes)
[ 28.985414] cx18-0: loaded v4l-cx23418-apu.fw firmware V00120000 (141200
bytes)
[ 29.013554] cx18-0: FW version: 0.0.74.0 (Release 2007/03/12)
[ 30.236535] cx18-0 843: loaded v4l-cx23418-dig.fw firmware (16382 bytes)
[ 30.273337] cx18-0 843: verified load of v4l-cx23418-dig.fw firmware
(16382 bytes)
dmesg | grep tveeprom
[ 23.628728] tveeprom 1-0050: Hauppauge model 74041, rev C6G8, serial#
7249596
[ 23.628733] tveeprom 1-0050: MAC address is 00:0d:fe:6e:9e:bc
[ 23.628736] tveeprom 1-0050: tuner model is TCL M30WTP-4N-E (idx 168,
type 85)
[ 23.628739] tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
[ 23.628741] tveeprom 1-0050: audio processor is CX23418 (idx 38)
[ 23.628744] tveeprom 1-0050: decoder processor is CX23418 (idx 31)
[ 23.628746] tveeprom 1-0050: has no radio, has IR receiver, has IR
transmitter
Thoughts? Suggestions? Wild speculation?
--
View this message in context: http://ivtv-users.838874.n2.nabble.com/HVR-1600-Analog-issue-tp5802291p5802291.html
Sent from the ivtv users mailing list archive at Nabble.com.
_______________________________________________
ivtv-users mailing list
ivtv-users@ivtvdriver.org
http://ivtvdriver.org/mailman/listinfo/ivtv-users
OTA Digital works great out-of the-box. Analog has been a pita though. I've
tried forcing the tuner to a known working channel and dumped the mpeg
stream to a file for review. Everything turns up with a blank red screen.
Tried setting vmalloc=256M just for fun (it didn't seem to be a necessity)
but same results. Using mythtv's channel scanner, every single channel
scanned locks and is added to the database. Not even the channels that
should be working show up in LiveTV, though - just blank red screen. There
is no cable box involved here and the cable works just fine otherwise.
dmsg| grep cx18
[ 23.370875] cx18: Start initialization, version 1.4.0
[ 23.370912] cx18-0: Initializing card 0
[ 23.370916] cx18-0: Autodetected Hauppauge card
[ 23.370990] cx18 0000:02:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 23.376071] cx18-0: cx23418 revision 01010000 (B)
[ 23.628748] cx18-0: Autodetected Hauppauge HVR-1600
[ 23.628750] cx18-0: Simultaneous Digital and Analog TV capture supported
[ 25.250796] tuner 2-0043: chip found @ 0x86 (cx18 i2c driver #0-1)
[ 25.416319] tuner 2-0061: chip found @ 0xc2 (cx18 i2c driver #0-1)
[ 25.691922] cs5345 1-004c: chip found @ 0x98 (cx18 i2c driver #0-0)
[ 26.646320] cx18-0: Registered device video0 for encoder MPEG (64 x 32.00
kB)
[ 26.646324] DVB: registering new adapter (cx18)
[ 27.293734] cx18-0: DVB Frontend registered
[ 27.293737] cx18-0: Registered DVB adapter0 for TS (32 x 32.00 kB)
[ 27.293767] cx18-0: Registered device video32 for encoder YUV (20 x
101.25 kB)
[ 27.293795] cx18-0: Registered device vbi0 for encoder VBI (20 x 51984
bytes)
[ 27.293820] cx18-0: Registered device video24 for encoder PCM audio (256
x 4.00 kB)
[ 27.293823] cx18-0: Initialized card: Hauppauge HVR-1600
[ 27.293845] cx18: End initialization
[ 27.604590] cx18-alsa: module loading...
[ 28.455730] cx18-0: loaded v4l-cx23418-cpu.fw firmware (158332 bytes)
[ 28.985414] cx18-0: loaded v4l-cx23418-apu.fw firmware V00120000 (141200
bytes)
[ 29.013554] cx18-0: FW version: 0.0.74.0 (Release 2007/03/12)
[ 30.236535] cx18-0 843: loaded v4l-cx23418-dig.fw firmware (16382 bytes)
[ 30.273337] cx18-0 843: verified load of v4l-cx23418-dig.fw firmware
(16382 bytes)
dmesg | grep tveeprom
[ 23.628728] tveeprom 1-0050: Hauppauge model 74041, rev C6G8, serial#
7249596
[ 23.628733] tveeprom 1-0050: MAC address is 00:0d:fe:6e:9e:bc
[ 23.628736] tveeprom 1-0050: tuner model is TCL M30WTP-4N-E (idx 168,
type 85)
[ 23.628739] tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
[ 23.628741] tveeprom 1-0050: audio processor is CX23418 (idx 38)
[ 23.628744] tveeprom 1-0050: decoder processor is CX23418 (idx 31)
[ 23.628746] tveeprom 1-0050: has no radio, has IR receiver, has IR
transmitter
Thoughts? Suggestions? Wild speculation?
--
View this message in context: http://ivtv-users.838874.n2.nabble.com/HVR-1600-Analog-issue-tp5802291p5802291.html
Sent from the ivtv users mailing list archive at Nabble.com.
_______________________________________________
ivtv-users mailing list
ivtv-users@ivtvdriver.org
http://ivtvdriver.org/mailman/listinfo/ivtv-users