Originally posted a long description of my problems here:
http://www.gossamer-threads.com/lists/mythtv/users/380947#380947
What it boils down to first of all is the Hauppauge HVR-1600 model 74591
supported by the cx18 driver?
I'm really starting to think that this different model # is the key to my
problems since I have:
tveeprom 1-0050: Hauppauge model 74591, rev C1A4, serial#
and everything I've found online has been like this one:
tveeprom 5-0050: Hauppauge model 74041, rev C6B2, serial# xxxxxxx
Here's a more complete dump of my dmesg (note that my system has a working
PVR-500 card as well:
Linux video capture interface: v2.00
ivtv: Start initialization, version 1.4.1
ivtv0: Initializing card 0
ivtv0: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKB] -> GSI 18 (level, low) ->
IRQ 18
tveeprom 0-0050: Hauppauge model 23552, rev D492, serial#
tveeprom 0-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57)
tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 0-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101,
type 62)
tveeprom 0-0050: audio processor is CX25843 (idx 37)
tveeprom 0-0050: decoder processor is CX25843 (idx 30)
tveeprom 0-0050: has radio
ivtv0: Autodetected WinTV PVR 500 (unit #1)
cx18: Start initialization, version 1.1.0
cx18-0: Initializing card 0
cx18-0: Autodetected Hauppauge card
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 17
ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [LNKA] -> GSI 17 (level, low) ->
IRQ 17
cx18-0: cx23418 revision 01010000 (B)
cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
lirc_dev: lirc_register_plugin: sample_rate: 0
lirc_mceusb2[2]: Philips eHome Infrared Transceiver on usb1:2
usbcore: registered new interface driver lirc_mceusb2
tveeprom 1-0050: Hauppauge model 74591, rev C1A4, serial#
tveeprom 1-0050: MAC address is 00-0D-FE-19-B8-32
tveeprom 1-0050: tuner model is TCL MNM05-4 (idx 104, type 4)
tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 1-0050: audio processor is CX23418 (idx 38)
tveeprom 1-0050: decoder processor is CX23418 (idx 31)
tveeprom 1-0050: has no radio
cx18-0: Autodetected Hauppauge HVR-1600
cx18-0: tveeprom cannot autodetect tuner!<6>cx18-0: Simultaneous Digital and
Analog TV capture supported
> The previous two lines seem to contradict each other. What's happening
> here?
tuner 0-0060: chip found @ 0xc0 (ivtv i2c driver #0)
tea5767 0-0060: type set to Philips TEA5767HN FM Radio
tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0)
tda9887 0-0043: creating new instance
tda9887 0-0043: tda988[5/6/7] found
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LAZA] -> GSI 23 (level, low) ->
IRQ 23
PCI: Setting latency timer of device 0000:00:09.0 to 64
tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
tuner 2-0043: chip found @ 0x86 (cx18 i2c driver #0-1)
tda9887 2-0043: creating new instance
tda9887 2-0043: tda988[5/6/7] found
wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
tuner 2-0061: chip found @ 0xc2 (cx18 i2c driver #0-1)
cs5345 1-004c: chip found @ 0x98 (cx18 i2c driver #0-0)
cx18-0: Registered device video0 for encoder MPEG (64 x 32 kB)
DVB: registering new adapter (cx18)
tuner-simple 0-0061: creating new instance
tuner-simple 0-0061: type set to 57 (Philips FQ1236A MK4)
ivtv0: Registered device video1 for encoder MPG (4096 kB)
ivtv0: Registered device video33 for encoder YUV (2048 kB)
ivtv0: Registered device vbi1 for encoder VBI (1024 kB)
ivtv0: Registered device video25 for encoder PCM (320 kB)
ivtv0: Registered device radio1 for encoder radio
ivtv0: Initialized card: WinTV PVR 500 (unit #1)
ivtv1: Initializing card 1
ivtv1: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 16
ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKC] -> GSI 16 (level, low) ->
IRQ 16
tveeprom 3-0050: Hauppauge model 23552, rev D492, serial#
tveeprom 3-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57)
tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 3-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101,
type 62)
tveeprom 3-0050: audio processor is CX25843 (idx 37)
tveeprom 3-0050: decoder processor is CX25843 (idx 30)
tveeprom 3-0050: has radio
ivtv1: Correcting tveeprom data: no radio present on second unit
ivtv1: Autodetected WinTV PVR 500 (unit #2)
cx25840 3-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
tuner 3-0043: chip found @ 0x86 (ivtv i2c driver #1)
tda9887 3-0043: creating new instance
tda9887 3-0043: tda988[5/6/7] found
tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #1)
wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #1)
MXL5005S: Attached at address 0x63
DVB: registering adapter 0 frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)...
cx18-0: DVB Frontend registered
cx18-0: Registered DVB adapter0 for TS (32 x 32 kB)
cx18-0: Registered device video32 for encoder YUV (16 x 128 kB)
cx18-0: Registered device vbi0 for encoder VBI (20 x 51984 bytes)
cx18-0: Registered device video24 for encoder PCM audio (256 x 4 kB)
cx18-0: Initialized card: Hauppauge HVR-1600
tuner-simple 3-0061: creating new instance
tuner-simple 3-0061: type set to 57 (Philips FQ1236A MK4)
ivtv1: Registered device video2 for encoder MPG (4096 kB)
ivtv1: Registered device video34 for encoder YUV (2048 kB)
ivtv1: Registered device vbi2 for encoder VBI (1024 kB)
ivtv1: Registered device video26 for encoder PCM (320 kB)
ivtv1: Initialized card: WinTV PVR 500 (unit #2)
ivtv: End initialization
cx18: End initialization
thanks!
http://www.gossamer-threads.com/lists/mythtv/users/380947#380947
What it boils down to first of all is the Hauppauge HVR-1600 model 74591
supported by the cx18 driver?
I'm really starting to think that this different model # is the key to my
problems since I have:
tveeprom 1-0050: Hauppauge model 74591, rev C1A4, serial#
and everything I've found online has been like this one:
tveeprom 5-0050: Hauppauge model 74041, rev C6B2, serial# xxxxxxx
Here's a more complete dump of my dmesg (note that my system has a working
PVR-500 card as well:
Linux video capture interface: v2.00
ivtv: Start initialization, version 1.4.1
ivtv0: Initializing card 0
ivtv0: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKB] -> GSI 18 (level, low) ->
IRQ 18
tveeprom 0-0050: Hauppauge model 23552, rev D492, serial#
tveeprom 0-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57)
tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 0-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101,
type 62)
tveeprom 0-0050: audio processor is CX25843 (idx 37)
tveeprom 0-0050: decoder processor is CX25843 (idx 30)
tveeprom 0-0050: has radio
ivtv0: Autodetected WinTV PVR 500 (unit #1)
cx18: Start initialization, version 1.1.0
cx18-0: Initializing card 0
cx18-0: Autodetected Hauppauge card
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 17
ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [LNKA] -> GSI 17 (level, low) ->
IRQ 17
cx18-0: cx23418 revision 01010000 (B)
cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
lirc_dev: lirc_register_plugin: sample_rate: 0
lirc_mceusb2[2]: Philips eHome Infrared Transceiver on usb1:2
usbcore: registered new interface driver lirc_mceusb2
tveeprom 1-0050: Hauppauge model 74591, rev C1A4, serial#
tveeprom 1-0050: MAC address is 00-0D-FE-19-B8-32
tveeprom 1-0050: tuner model is TCL MNM05-4 (idx 104, type 4)
tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 1-0050: audio processor is CX23418 (idx 38)
tveeprom 1-0050: decoder processor is CX23418 (idx 31)
tveeprom 1-0050: has no radio
cx18-0: Autodetected Hauppauge HVR-1600
cx18-0: tveeprom cannot autodetect tuner!<6>cx18-0: Simultaneous Digital and
Analog TV capture supported
> The previous two lines seem to contradict each other. What's happening
> here?
tuner 0-0060: chip found @ 0xc0 (ivtv i2c driver #0)
tea5767 0-0060: type set to Philips TEA5767HN FM Radio
tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0)
tda9887 0-0043: creating new instance
tda9887 0-0043: tda988[5/6/7] found
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LAZA] -> GSI 23 (level, low) ->
IRQ 23
PCI: Setting latency timer of device 0000:00:09.0 to 64
tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
tuner 2-0043: chip found @ 0x86 (cx18 i2c driver #0-1)
tda9887 2-0043: creating new instance
tda9887 2-0043: tda988[5/6/7] found
wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
tuner 2-0061: chip found @ 0xc2 (cx18 i2c driver #0-1)
cs5345 1-004c: chip found @ 0x98 (cx18 i2c driver #0-0)
cx18-0: Registered device video0 for encoder MPEG (64 x 32 kB)
DVB: registering new adapter (cx18)
tuner-simple 0-0061: creating new instance
tuner-simple 0-0061: type set to 57 (Philips FQ1236A MK4)
ivtv0: Registered device video1 for encoder MPG (4096 kB)
ivtv0: Registered device video33 for encoder YUV (2048 kB)
ivtv0: Registered device vbi1 for encoder VBI (1024 kB)
ivtv0: Registered device video25 for encoder PCM (320 kB)
ivtv0: Registered device radio1 for encoder radio
ivtv0: Initialized card: WinTV PVR 500 (unit #1)
ivtv1: Initializing card 1
ivtv1: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 16
ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKC] -> GSI 16 (level, low) ->
IRQ 16
tveeprom 3-0050: Hauppauge model 23552, rev D492, serial#
tveeprom 3-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57)
tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 3-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101,
type 62)
tveeprom 3-0050: audio processor is CX25843 (idx 37)
tveeprom 3-0050: decoder processor is CX25843 (idx 30)
tveeprom 3-0050: has radio
ivtv1: Correcting tveeprom data: no radio present on second unit
ivtv1: Autodetected WinTV PVR 500 (unit #2)
cx25840 3-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
tuner 3-0043: chip found @ 0x86 (ivtv i2c driver #1)
tda9887 3-0043: creating new instance
tda9887 3-0043: tda988[5/6/7] found
tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #1)
wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #1)
MXL5005S: Attached at address 0x63
DVB: registering adapter 0 frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)...
cx18-0: DVB Frontend registered
cx18-0: Registered DVB adapter0 for TS (32 x 32 kB)
cx18-0: Registered device video32 for encoder YUV (16 x 128 kB)
cx18-0: Registered device vbi0 for encoder VBI (20 x 51984 bytes)
cx18-0: Registered device video24 for encoder PCM audio (256 x 4 kB)
cx18-0: Initialized card: Hauppauge HVR-1600
tuner-simple 3-0061: creating new instance
tuner-simple 3-0061: type set to 57 (Philips FQ1236A MK4)
ivtv1: Registered device video2 for encoder MPG (4096 kB)
ivtv1: Registered device video34 for encoder YUV (2048 kB)
ivtv1: Registered device vbi2 for encoder VBI (1024 kB)
ivtv1: Registered device video26 for encoder PCM (320 kB)
ivtv1: Initialized card: WinTV PVR 500 (unit #2)
ivtv: End initialization
cx18: End initialization
thanks!