Hi everibody,
I can't make my Wintv pvr-350 work. When I insert the module, I can't
see in the log an error about the eeprom initialisation "Huh, no eeprom
present (err=-121)".
I find that this errors is related to my nova-t card. When I remove the
nova-t card from the system, the ivtv driver load well. If I put back
the nova-t card, the eeprom error come back.
I also try :
To change the newi2c parameters from 0 to 1, but no chance with it,
the only result of this is to change the error code "Huh, no eeprom
present (err=-6)?"
To swap the card in pci slot, putting pvr-350 card before the nova-t
card ==> no change.
To downgrad to older kernel, ivtv drivers : try 2.6.25 with ivtv
1.2, older kernel <2.6.25 does not work on this board because of SATA
errors.
my current system is :
Linux saloon.clae.net 2.6.27.21-170.2.56.fc10.i686 #1 SMP Mon Mar 23
23:37:54 EDT 2009 i686 athlon i386 GNU/Linux
The configuration have worked before, but I made many change the last 6
months, and so I don't really know which change break my config.
- I've upgrade from Fedora core 8 to Fedora core 10.
- Kernel was upgrade from 2.6.23 to 2.6.27.
- IvTv drivers was of course also upgrade, thinks it's from 1.1.0 to
current release.
- I have change my motherboard, it's now an asus M3N-H/HDMI, thinks
it was a A7N8X-E before.
If someone could help me, would really appreciate.
Thanks,
Laurent.
With the nova-t card insert and newi2c=1
============================================================================================================================
May 1 13:00:24 saloon kernel: Linux video capture interface: v2.00
May 1 13:00:24 saloon kernel: ivtv: Start initialization, version 1.4.0
May 1 13:00:24 saloon kernel: ivtv0: Initializing card #0
May 1 13:00:24 saloon kernel: ivtv0: Autodetected Hauppauge card
(cx23415 based)
May 1 13:00:24 saloon kernel: ivtv 0000:01:09.0: PCI INT A ->
Link[APC2] -> GSI 17 (level, low) -> IRQ 17
May 1 13:00:24 saloon kernel: tveeprom 0-0050: Huh, no eeprom present
(err=-121)?
May 1 13:00:24 saloon kernel: tveeprom 0-0050: Encountered bad packet
header [02]. Corrupt or not a Hauppauge eeprom.
May 1 13:00:24 saloon kernel: ivtv0: Invalid EEPROM
May 1 13:00:25 saloon kernel: msp3400 0-0040: chip reset failed
May 1 13:00:25 saloon kernel: ivtv0: Registered device video0 for
encoder MPG (16384 kB)
May 1 13:00:25 saloon kernel: ivtv0: Registered device video32 for
encoder YUV (2048 kB)
May 1 13:00:25 saloon kernel: ivtv0: Registered device vbi0 for encoder
VBI (16384 kB)
May 1 13:00:25 saloon kernel: ivtv0: Registered device video24 for
encoder PCM (320 kB)
May 1 13:00:25 saloon kernel: ivtv0: Registered device radio0 for
encoder radio
May 1 13:00:25 saloon kernel: ivtv0: Registered device video16 for
decoder MPG (1024 kB)
May 1 13:00:25 saloon kernel: ivtv0: Registered device vbi8 for decoder
VBI (64 kB)
May 1 13:00:25 saloon kernel: ivtv0: Registered device vbi16 for
decoder VOUT
May 1 13:00:25 saloon kernel: ivtv0: Registered device video48 for
decoder YUV (1024 kB)
May 1 13:00:25 saloon kernel: ivtv0: Initialized card #0: Hauppauge
WinTV PVR-350
May 1 13:00:25 saloon kernel: ivtv: End initialization
May 1 13:00:26 saloon kernel: firmware: requesting v4l-cx2341x-enc.fw
May 1 13:00:26 saloon kernel: ivtv0: Loaded v4l-cx2341x-enc.fw firmware
(376836 bytes)
May 1 13:00:26 saloon kernel: firmware: requesting v4l-cx2341x-dec.fw
May 1 13:00:26 saloon kernel: ivtv0: Loaded v4l-cx2341x-dec.fw firmware
(262144 bytes)
May 1 13:00:26 saloon kernel: ivtv0: Encoder mailbox not found
May 1 13:00:26 saloon kernel: ivtv0: Retry loading firmware
May 1 13:00:26 saloon kernel: firmware: requesting v4l-cx2341x-enc.fw
May 1 13:00:27 saloon kernel: ivtv0: Loaded v4l-cx2341x-enc.fw firmware
(376836 bytes)
May 1 13:00:27 saloon kernel: firmware: requesting v4l-cx2341x-dec.fw
May 1 13:00:27 saloon kernel: ivtv0: Loaded v4l-cx2341x-dec.fw firmware
(262144 bytes)
May 1 13:00:27 saloon kernel: ivtv0: Encoder mailbox not found
May 1 13:00:27 saloon kernel: ivtv0: Failed to initialize on minor 0
May 1 13:00:27 saloon kernel: ivtv0: Failed to initialize on minor 224
May 1 13:00:27 saloon kernel: ivtv0: Failed to initialize on minor 32
May 1 13:00:27 saloon kernel: ivtv0: Failed to initialize on minor 24
May 1 13:00:27 saloon kernel: ivtv0: Failed to initialize on minor 240
May 1 13:00:27 saloon kernel: ivtv0: Failed to initialize on minor 64
May 1 13:00:27 saloon kernel: ivtv0: Failed to initialize on minor 16
May 1 13:00:27 saloon kernel: ivtv0: Failed to initialize on minor 232
May 1 13:00:27 saloon kernel: ivtv0: Failed to initialize on minor 48
============================================================================================================================
With the nova-t card insert and newi2c=0
============================================================================================================================
May 1 13:01:13 saloon kernel: Linux video capture interface: v2.00
May 1 13:01:13 saloon kernel: ivtv: Start initialization, version 1.4.0
May 1 13:01:13 saloon kernel: ivtv0: Initializing card #0
May 1 13:01:13 saloon kernel: ivtv0: Autodetected Hauppauge card
(cx23415 based)
May 1 13:01:13 saloon kernel: ivtv 0000:01:09.0: PCI INT A ->
Link[APC2] -> GSI 17 (level, low) -> IRQ 17
May 1 13:01:15 saloon kernel: tveeprom 0-0050: Huh, no eeprom present
(err=-6)?
May 1 13:01:15 saloon kernel: tveeprom 0-0050: Encountered bad packet
header [d0]. Corrupt or not a Hauppauge eeprom.
May 1 13:01:15 saloon kernel: ivtv0: Invalid EEPROM
May 1 13:02:05 saloon kernel: i2c-adapter i2c-0: sendbytes: error -110
May 1 13:02:05 saloon kernel: msp3400 0-0040: chip reset failed
May 1 13:02:10 saloon kernel: ivtv0: Registered device video0 for
encoder MPG (16384 kB)
May 1 13:02:10 saloon kernel: ivtv0: Registered device video32 for
encoder YUV (2048 kB)
May 1 13:02:10 saloon kernel: ivtv0: Registered device vbi0 for encoder
VBI (16384 kB)
May 1 13:02:10 saloon kernel: ivtv0: Registered device video24 for
encoder PCM (320 kB)
May 1 13:02:10 saloon kernel: ivtv0: Registered device radio0 for
encoder radio
May 1 13:02:10 saloon kernel: ivtv0: Registered device video16 for
decoder MPG (1024 kB)
May 1 13:02:10 saloon kernel: ivtv0: Registered device vbi8 for decoder
VBI (64 kB)
May 1 13:02:10 saloon kernel: ivtv0: Registered device vbi16 for
decoder VOUT
May 1 13:02:10 saloon kernel: ivtv0: Registered device video48 for
decoder YUV (1024 kB)
May 1 13:02:10 saloon kernel: ivtv0: Initialized card #0: Hauppauge
WinTV PVR-350
May 1 13:02:10 saloon kernel: ivtv: End initialization
May 1 13:02:11 saloon kernel: firmware: requesting v4l-cx2341x-enc.fw
May 1 13:02:11 saloon kernel: ivtv0: Loaded v4l-cx2341x-enc.fw firmware
(376836 bytes)
May 1 13:02:11 saloon kernel: firmware: requesting v4l-cx2341x-dec.fw
May 1 13:02:11 saloon kernel: ivtv0: Loaded v4l-cx2341x-dec.fw firmware
(262144 bytes)
May 1 13:02:11 saloon kernel: ivtv0: Encoder mailbox not found
May 1 13:02:11 saloon kernel: ivtv0: Retry loading firmware
May 1 13:02:12 saloon kernel: firmware: requesting v4l-cx2341x-enc.fw
May 1 13:02:12 saloon kernel: ivtv0: Loaded v4l-cx2341x-enc.fw firmware
(376836 bytes)
May 1 13:02:12 saloon kernel: firmware: requesting v4l-cx2341x-dec.fw
May 1 13:02:12 saloon kernel: ivtv0: Loaded v4l-cx2341x-dec.fw firmware
(262144 bytes)
May 1 13:02:12 saloon kernel: ivtv0: Encoder mailbox not found
May 1 13:02:12 saloon kernel: ivtv0: Failed to initialize on minor 64
May 1 13:02:12 saloon kernel: ivtv0: Failed to initialize on minor 0
May 1 13:02:12 saloon kernel: ivtv0: Failed to initialize on minor 16
May 1 13:02:12 saloon kernel: ivtv0: Failed to initialize on minor 224
May 1 13:02:12 saloon kernel: ivtv0: Failed to initialize on minor 32
May 1 13:02:12 saloon kernel: ivtv0: Failed to initialize on minor 24
May 1 13:02:12 saloon kernel: ivtv0: Failed to initialize on minor 240
May 1 13:02:12 saloon kernel: ivtv0: Failed to initialize on minor 232
May 1 13:02:12 saloon kernel: ivtv0: Failed to initialize on minor 48
============================================================================================================================
Without the nova-t card :
============================================================================================================================
May 1 11:13:50 saloon kernel: Linux video capture interface: v2.00
May 1 11:13:50 saloon kernel: ivtv: Start initialization, version 1.4.0
May 1 11:13:50 saloon kernel: ivtv0: Initializing card #0
May 1 11:13:50 saloon kernel: ivtv0: Autodetected Hauppauge card
(cx23415 based)
May 1 11:13:50 saloon kernel: tveeprom 0-0050: Hauppauge model 48139,
rev K157, serial# 2943642
May 1 11:13:50 saloon kernel: tveeprom 0-0050: tuner model is Philips
FM1216 ME MK3 (idx 57, type 38)
May 1 11:13:50 saloon kernel: tveeprom 0-0050: TV standards PAL(B/G)
PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
May 1 11:13:50 saloon kernel: tveeprom 0-0050: audio processor is
MSP4418 (idx 25)
May 1 11:13:50 saloon kernel: tveeprom 0-0050: decoder processor is
SAA7115 (idx 19)
May 1 11:13:50 saloon kernel: tveeprom 0-0050: has radio, has IR
receiver, has no IR transmitter
May 1 11:13:50 saloon kernel: ivtv0: Autodetected Hauppauge WinTV PVR-350
May 1 11:13:50 saloon kernel: saa7115 0-0021: saa7115 found
(1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
May 1 11:13:50 saloon kernel: saa7127 0-0044: saa7127 found @ 0x88
(ivtv i2c driver #0)
May 1 11:13:50 saloon kernel: msp3400 0-0040: MSP4418G-B3 found @ 0x80
(ivtv i2c driver #0)
May 1 11:13:50 saloon kernel: msp3400 0-0040: msp3400 supports nicam
and radio, mode is autodetect and autoselect
May 1 11:13:50 saloon kernel: tuner 0-0043: chip found @ 0x86 (ivtv i2c
driver #0)
May 1 11:13:50 saloon kernel: tda9887 0-0043: creating new instance
May 1 11:13:50 saloon kernel: tda9887 0-0043: tda988[5/6/7] found
May 1 11:13:50 saloon kernel: tuner 0-0061: chip found @ 0xc2 (ivtv i2c
driver #0)
May 1 11:13:50 saloon kernel: tuner-simple 0-0061: creating new instance
May 1 11:13:50 saloon kernel: tuner-simple 0-0061: type set to 38
(Philips PAL/SECAM multi (FM1216ME MK3))
May 1 11:13:50 saloon kernel: ivtv0: Registered device video0 for
encoder MPG (16384 kB)
May 1 11:13:50 saloon kernel: ivtv0: Registered device video32 for
encoder YUV (2048 kB)
May 1 11:13:50 saloon kernel: ivtv0: Registered device vbi0 for encoder
VBI (16384 kB)
May 1 11:13:50 saloon kernel: ivtv0: Registered device video24 for
encoder PCM (320 kB)
May 1 11:13:50 saloon kernel: ivtv0: Registered device radio0 for
encoder radio
May 1 11:13:50 saloon kernel: ivtv0: Registered device video16 for
decoder MPG (1024 kB)
May 1 11:13:50 saloon kernel: ivtv0: Registered device vbi8 for decoder
VBI (64 kB)
May 1 11:13:50 saloon kernel: ivtv0: Registered device vbi16 for
decoder VOUT
May 1 11:13:50 saloon kernel: ivtv0: Registered device video48 for
decoder YUV (1024 kB)
May 1 11:13:50 saloon kernel: ivtv0: Initialized card #0: Hauppauge
WinTV PVR-350
May 1 11:13:50 saloon kernel: ivtv: End initialization
May 1 11:13:51 saloon kernel: firmware: requesting v4l-cx2341x-enc.fw
May 1 11:13:51 saloon kernel: ivtv0: Loaded v4l-cx2341x-enc.fw firmware
(376836 bytes)
May 1 11:13:51 saloon kernel: firmware: requesting v4l-cx2341x-dec.fw
May 1 11:13:51 saloon kernel: ivtv0: Loaded v4l-cx2341x-dec.fw firmware
(262144 bytes)
May 1 11:13:51 saloon kernel: ivtv0: Encoder revision: 0x02060039
May 1 11:13:51 saloon kernel: ivtv0: Decoder revision: 0x02020023
May 1 11:13:51 saloon kernel: firmware: requesting v4l-cx2341x-init.mpg
May 1 11:13:51 saloon kernel: ivtv0: Loaded v4l-cx2341x-init.mpg
firmware (155648 bytes)
============================================================================================================================
lspci -vvv
============================================================================================================================
00:00.0 RAM memory: nVidia Corporation Device 0754 (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 82e2
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [94] HyperTransport: #1a
Capabilities: [60] HyperTransport: Retry Mode
Capabilities: [44] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=0 UnitCnt=0 MastHost- DefDir- DUL-
Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit
DwFcInEn- LWO=16bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+
<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit
DwFcInEn- LWO=8bit DwFcOutEn-
Revision ID: 3.00
Link Frequency 0: 1.0GHz
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz-
600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD+
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz-
600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE-
CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [d0] HyperTransport: #1c
00:01.0 ISA bridge: nVidia Corporation Device 075c (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 82e2
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.1 SMBus: nVidia Corporation Device 0752 (rev a1)
Subsystem: ASUSTeK Computer Inc. Device 82e2
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 255
Region 0: I/O ports at fc00 [size=64]
Region 4: I/O ports at 1c00 [size=64]
Region 5: I/O ports at 1c40 [size=64]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.2 RAM memory: nVidia Corporation Device 0751 (rev a1)
Subsystem: ASUSTeK Computer Inc. Device 82e2
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:01.3 Co-processor: nVidia Corporation Device 0753 (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 82e2
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 7
Region 0: Memory at fdf80000 (32-bit, non-prefetchable) [size=512K]
00:01.4 RAM memory: nVidia Corporation Device 0568 (rev a1)
Subsystem: ASUSTeK Computer Inc. Device 82e2
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:02.0 USB Controller: nVidia Corporation Device 077b (rev a1) (prog-if
10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device 82e2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd
00:02.1 USB Controller: nVidia Corporation Device 077c (rev a1) (prog-if
20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 82e2
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=00a0
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd
00:04.0 USB Controller: nVidia Corporation Device 077d (rev a1) (prog-if
10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device 82e2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd
00:04.1 USB Controller: nVidia Corporation Device 077e (rev a1) (prog-if
20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 82e2
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 21
Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=00a0
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: ehci_hcd
00:06.0 IDE interface: nVidia Corporation Device 0759 (rev a1) (prog-if
8a [Master SecP PriP])
Subsystem: Device f043:82e2
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[disabled] [size=1]
Region 4: I/O ports at f000 [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pata_amd
Kernel modules: pata_amd
00:07.0 Audio device: nVidia Corporation Device 0774 (rev a1)
Subsystem: ASUSTeK Computer Inc. Device 82fe
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at fe020000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+
Count=1/1 Enable-
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:08.0 PCI bridge: nVidia Corporation Device 075a (rev a1) (prog-if 01
[Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort+
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fa000000-fcffffff
Prefetchable memory behind bridge: ec000000-efffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: [b8] Subsystem: ASUSTeK Computer Inc. Device 82e2
Capabilities: [8c] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
00:09.0 IDE interface: nVidia Corporation Device 0ad0 (rev a2) (prog-if
85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device 82e2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at 09f0 [size=8]
Region 1: I/O ports at 0bf0 [size=4]
Region 2: I/O ports at 0970 [size=8]
Region 3: I/O ports at 0b70 [size=4]
Region 4: I/O ports at dc00 [size=16]
Region 5: Memory at fe026000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] SATA HBA <?>
Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+
Count=1/8 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [ec] HyperTransport: MSI Mapping Enable+ Fixed+
Kernel driver in use: ahci
00:0a.0 Ethernet controller: nVidia Corporation Device 0760 (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 82e2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at d800 [size=8]
Region 2: Memory at fe02a000 (32-bit, non-prefetchable) [size=256]
Region 3: Memory at fe029000 (32-bit, non-prefetchable) [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+
Count=1/16 Enable-
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
Kernel driver in use: forcedeth
Kernel modules: forcedeth
00:10.0 PCI bridge: nVidia Corporation Device 0778 (rev a1) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: f6000000-f9ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device 82e2
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+
Count=1/2 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency
L0 <512ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+
DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 1, PowerLimit 75.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range AB, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -3.5dB
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Kernel driver in use: pcieport-driver
00:12.0 PCI bridge: nVidia Corporation Device 075b (rev a1) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device 82e2
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+
Count=1/2 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <512ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 3, PowerLimit 10.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet-
Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Kernel driver in use: pcieport-driver
00:13.0 PCI bridge: nVidia Corporation Device 077a (rev a1) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fdc00000-fdcfffff
Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device 82e2
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+
Count=1/2 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <512ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 4, PowerLimit 10.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet-
Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Kernel driver in use: pcieport-driver
00:14.0 PCI bridge: nVidia Corporation Device 077a (rev a1) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00008000-00008fff
Memory behind bridge: fda00000-fdafffff
Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device 82e2
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+
Count=1/2 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <512ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 5, PowerLimit 10.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet-
Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Kernel driver in use: pcieport-driver
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>
Kernel driver in use: k8temp
Kernel modules: k8temp
01:09.0 Multimedia video controller: Internext Compression Inc iTVC15
MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR-350
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at ec000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ivtv
Kernel modules: ivtv
01:0b.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video
and Audio Decoder (rev 05)
Subsystem: Hauppauge computer works Inc. Device 9002
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+ INTx-
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: cx8800
01:0b.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and
Audio Decoder [MPEG Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Nova-T DVB-T Model 909
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+ INTx-
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: cx8802
01:0b.4 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and
Audio Decoder [IR Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Nova-T DVB-T Model 909
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 32 (1500ns min, 63750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 255
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:00.0 VGA compatible controller: nVidia Corporation Device 0641 (rev
a1) (prog-if 00 [VGA controller])
Subsystem: CardExpert Technology Device 1401
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f6000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at bc00 [size=128]
Expansion ROM at f9f80000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+
Count=1/1 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<512ns, L1 <4us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1,
Latency L0 <512ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [b4] Vendor Specific Information <?>
Capabilities: [100] Virtual Channel <?>
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information <?>
Kernel modules: nvidiafb
============================================================================================================================
_______________________________________________
ivtv-users mailing list
ivtv-users@ivtvdriver.org
http://ivtvdriver.org/mailman/listinfo/ivtv-users
I can't make my Wintv pvr-350 work. When I insert the module, I can't
see in the log an error about the eeprom initialisation "Huh, no eeprom
present (err=-121)".
I find that this errors is related to my nova-t card. When I remove the
nova-t card from the system, the ivtv driver load well. If I put back
the nova-t card, the eeprom error come back.
I also try :
To change the newi2c parameters from 0 to 1, but no chance with it,
the only result of this is to change the error code "Huh, no eeprom
present (err=-6)?"
To swap the card in pci slot, putting pvr-350 card before the nova-t
card ==> no change.
To downgrad to older kernel, ivtv drivers : try 2.6.25 with ivtv
1.2, older kernel <2.6.25 does not work on this board because of SATA
errors.
my current system is :
Linux saloon.clae.net 2.6.27.21-170.2.56.fc10.i686 #1 SMP Mon Mar 23
23:37:54 EDT 2009 i686 athlon i386 GNU/Linux
The configuration have worked before, but I made many change the last 6
months, and so I don't really know which change break my config.
- I've upgrade from Fedora core 8 to Fedora core 10.
- Kernel was upgrade from 2.6.23 to 2.6.27.
- IvTv drivers was of course also upgrade, thinks it's from 1.1.0 to
current release.
- I have change my motherboard, it's now an asus M3N-H/HDMI, thinks
it was a A7N8X-E before.
If someone could help me, would really appreciate.
Thanks,
Laurent.
With the nova-t card insert and newi2c=1
============================================================================================================================
May 1 13:00:24 saloon kernel: Linux video capture interface: v2.00
May 1 13:00:24 saloon kernel: ivtv: Start initialization, version 1.4.0
May 1 13:00:24 saloon kernel: ivtv0: Initializing card #0
May 1 13:00:24 saloon kernel: ivtv0: Autodetected Hauppauge card
(cx23415 based)
May 1 13:00:24 saloon kernel: ivtv 0000:01:09.0: PCI INT A ->
Link[APC2] -> GSI 17 (level, low) -> IRQ 17
May 1 13:00:24 saloon kernel: tveeprom 0-0050: Huh, no eeprom present
(err=-121)?
May 1 13:00:24 saloon kernel: tveeprom 0-0050: Encountered bad packet
header [02]. Corrupt or not a Hauppauge eeprom.
May 1 13:00:24 saloon kernel: ivtv0: Invalid EEPROM
May 1 13:00:25 saloon kernel: msp3400 0-0040: chip reset failed
May 1 13:00:25 saloon kernel: ivtv0: Registered device video0 for
encoder MPG (16384 kB)
May 1 13:00:25 saloon kernel: ivtv0: Registered device video32 for
encoder YUV (2048 kB)
May 1 13:00:25 saloon kernel: ivtv0: Registered device vbi0 for encoder
VBI (16384 kB)
May 1 13:00:25 saloon kernel: ivtv0: Registered device video24 for
encoder PCM (320 kB)
May 1 13:00:25 saloon kernel: ivtv0: Registered device radio0 for
encoder radio
May 1 13:00:25 saloon kernel: ivtv0: Registered device video16 for
decoder MPG (1024 kB)
May 1 13:00:25 saloon kernel: ivtv0: Registered device vbi8 for decoder
VBI (64 kB)
May 1 13:00:25 saloon kernel: ivtv0: Registered device vbi16 for
decoder VOUT
May 1 13:00:25 saloon kernel: ivtv0: Registered device video48 for
decoder YUV (1024 kB)
May 1 13:00:25 saloon kernel: ivtv0: Initialized card #0: Hauppauge
WinTV PVR-350
May 1 13:00:25 saloon kernel: ivtv: End initialization
May 1 13:00:26 saloon kernel: firmware: requesting v4l-cx2341x-enc.fw
May 1 13:00:26 saloon kernel: ivtv0: Loaded v4l-cx2341x-enc.fw firmware
(376836 bytes)
May 1 13:00:26 saloon kernel: firmware: requesting v4l-cx2341x-dec.fw
May 1 13:00:26 saloon kernel: ivtv0: Loaded v4l-cx2341x-dec.fw firmware
(262144 bytes)
May 1 13:00:26 saloon kernel: ivtv0: Encoder mailbox not found
May 1 13:00:26 saloon kernel: ivtv0: Retry loading firmware
May 1 13:00:26 saloon kernel: firmware: requesting v4l-cx2341x-enc.fw
May 1 13:00:27 saloon kernel: ivtv0: Loaded v4l-cx2341x-enc.fw firmware
(376836 bytes)
May 1 13:00:27 saloon kernel: firmware: requesting v4l-cx2341x-dec.fw
May 1 13:00:27 saloon kernel: ivtv0: Loaded v4l-cx2341x-dec.fw firmware
(262144 bytes)
May 1 13:00:27 saloon kernel: ivtv0: Encoder mailbox not found
May 1 13:00:27 saloon kernel: ivtv0: Failed to initialize on minor 0
May 1 13:00:27 saloon kernel: ivtv0: Failed to initialize on minor 224
May 1 13:00:27 saloon kernel: ivtv0: Failed to initialize on minor 32
May 1 13:00:27 saloon kernel: ivtv0: Failed to initialize on minor 24
May 1 13:00:27 saloon kernel: ivtv0: Failed to initialize on minor 240
May 1 13:00:27 saloon kernel: ivtv0: Failed to initialize on minor 64
May 1 13:00:27 saloon kernel: ivtv0: Failed to initialize on minor 16
May 1 13:00:27 saloon kernel: ivtv0: Failed to initialize on minor 232
May 1 13:00:27 saloon kernel: ivtv0: Failed to initialize on minor 48
============================================================================================================================
With the nova-t card insert and newi2c=0
============================================================================================================================
May 1 13:01:13 saloon kernel: Linux video capture interface: v2.00
May 1 13:01:13 saloon kernel: ivtv: Start initialization, version 1.4.0
May 1 13:01:13 saloon kernel: ivtv0: Initializing card #0
May 1 13:01:13 saloon kernel: ivtv0: Autodetected Hauppauge card
(cx23415 based)
May 1 13:01:13 saloon kernel: ivtv 0000:01:09.0: PCI INT A ->
Link[APC2] -> GSI 17 (level, low) -> IRQ 17
May 1 13:01:15 saloon kernel: tveeprom 0-0050: Huh, no eeprom present
(err=-6)?
May 1 13:01:15 saloon kernel: tveeprom 0-0050: Encountered bad packet
header [d0]. Corrupt or not a Hauppauge eeprom.
May 1 13:01:15 saloon kernel: ivtv0: Invalid EEPROM
May 1 13:02:05 saloon kernel: i2c-adapter i2c-0: sendbytes: error -110
May 1 13:02:05 saloon kernel: msp3400 0-0040: chip reset failed
May 1 13:02:10 saloon kernel: ivtv0: Registered device video0 for
encoder MPG (16384 kB)
May 1 13:02:10 saloon kernel: ivtv0: Registered device video32 for
encoder YUV (2048 kB)
May 1 13:02:10 saloon kernel: ivtv0: Registered device vbi0 for encoder
VBI (16384 kB)
May 1 13:02:10 saloon kernel: ivtv0: Registered device video24 for
encoder PCM (320 kB)
May 1 13:02:10 saloon kernel: ivtv0: Registered device radio0 for
encoder radio
May 1 13:02:10 saloon kernel: ivtv0: Registered device video16 for
decoder MPG (1024 kB)
May 1 13:02:10 saloon kernel: ivtv0: Registered device vbi8 for decoder
VBI (64 kB)
May 1 13:02:10 saloon kernel: ivtv0: Registered device vbi16 for
decoder VOUT
May 1 13:02:10 saloon kernel: ivtv0: Registered device video48 for
decoder YUV (1024 kB)
May 1 13:02:10 saloon kernel: ivtv0: Initialized card #0: Hauppauge
WinTV PVR-350
May 1 13:02:10 saloon kernel: ivtv: End initialization
May 1 13:02:11 saloon kernel: firmware: requesting v4l-cx2341x-enc.fw
May 1 13:02:11 saloon kernel: ivtv0: Loaded v4l-cx2341x-enc.fw firmware
(376836 bytes)
May 1 13:02:11 saloon kernel: firmware: requesting v4l-cx2341x-dec.fw
May 1 13:02:11 saloon kernel: ivtv0: Loaded v4l-cx2341x-dec.fw firmware
(262144 bytes)
May 1 13:02:11 saloon kernel: ivtv0: Encoder mailbox not found
May 1 13:02:11 saloon kernel: ivtv0: Retry loading firmware
May 1 13:02:12 saloon kernel: firmware: requesting v4l-cx2341x-enc.fw
May 1 13:02:12 saloon kernel: ivtv0: Loaded v4l-cx2341x-enc.fw firmware
(376836 bytes)
May 1 13:02:12 saloon kernel: firmware: requesting v4l-cx2341x-dec.fw
May 1 13:02:12 saloon kernel: ivtv0: Loaded v4l-cx2341x-dec.fw firmware
(262144 bytes)
May 1 13:02:12 saloon kernel: ivtv0: Encoder mailbox not found
May 1 13:02:12 saloon kernel: ivtv0: Failed to initialize on minor 64
May 1 13:02:12 saloon kernel: ivtv0: Failed to initialize on minor 0
May 1 13:02:12 saloon kernel: ivtv0: Failed to initialize on minor 16
May 1 13:02:12 saloon kernel: ivtv0: Failed to initialize on minor 224
May 1 13:02:12 saloon kernel: ivtv0: Failed to initialize on minor 32
May 1 13:02:12 saloon kernel: ivtv0: Failed to initialize on minor 24
May 1 13:02:12 saloon kernel: ivtv0: Failed to initialize on minor 240
May 1 13:02:12 saloon kernel: ivtv0: Failed to initialize on minor 232
May 1 13:02:12 saloon kernel: ivtv0: Failed to initialize on minor 48
============================================================================================================================
Without the nova-t card :
============================================================================================================================
May 1 11:13:50 saloon kernel: Linux video capture interface: v2.00
May 1 11:13:50 saloon kernel: ivtv: Start initialization, version 1.4.0
May 1 11:13:50 saloon kernel: ivtv0: Initializing card #0
May 1 11:13:50 saloon kernel: ivtv0: Autodetected Hauppauge card
(cx23415 based)
May 1 11:13:50 saloon kernel: tveeprom 0-0050: Hauppauge model 48139,
rev K157, serial# 2943642
May 1 11:13:50 saloon kernel: tveeprom 0-0050: tuner model is Philips
FM1216 ME MK3 (idx 57, type 38)
May 1 11:13:50 saloon kernel: tveeprom 0-0050: TV standards PAL(B/G)
PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
May 1 11:13:50 saloon kernel: tveeprom 0-0050: audio processor is
MSP4418 (idx 25)
May 1 11:13:50 saloon kernel: tveeprom 0-0050: decoder processor is
SAA7115 (idx 19)
May 1 11:13:50 saloon kernel: tveeprom 0-0050: has radio, has IR
receiver, has no IR transmitter
May 1 11:13:50 saloon kernel: ivtv0: Autodetected Hauppauge WinTV PVR-350
May 1 11:13:50 saloon kernel: saa7115 0-0021: saa7115 found
(1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
May 1 11:13:50 saloon kernel: saa7127 0-0044: saa7127 found @ 0x88
(ivtv i2c driver #0)
May 1 11:13:50 saloon kernel: msp3400 0-0040: MSP4418G-B3 found @ 0x80
(ivtv i2c driver #0)
May 1 11:13:50 saloon kernel: msp3400 0-0040: msp3400 supports nicam
and radio, mode is autodetect and autoselect
May 1 11:13:50 saloon kernel: tuner 0-0043: chip found @ 0x86 (ivtv i2c
driver #0)
May 1 11:13:50 saloon kernel: tda9887 0-0043: creating new instance
May 1 11:13:50 saloon kernel: tda9887 0-0043: tda988[5/6/7] found
May 1 11:13:50 saloon kernel: tuner 0-0061: chip found @ 0xc2 (ivtv i2c
driver #0)
May 1 11:13:50 saloon kernel: tuner-simple 0-0061: creating new instance
May 1 11:13:50 saloon kernel: tuner-simple 0-0061: type set to 38
(Philips PAL/SECAM multi (FM1216ME MK3))
May 1 11:13:50 saloon kernel: ivtv0: Registered device video0 for
encoder MPG (16384 kB)
May 1 11:13:50 saloon kernel: ivtv0: Registered device video32 for
encoder YUV (2048 kB)
May 1 11:13:50 saloon kernel: ivtv0: Registered device vbi0 for encoder
VBI (16384 kB)
May 1 11:13:50 saloon kernel: ivtv0: Registered device video24 for
encoder PCM (320 kB)
May 1 11:13:50 saloon kernel: ivtv0: Registered device radio0 for
encoder radio
May 1 11:13:50 saloon kernel: ivtv0: Registered device video16 for
decoder MPG (1024 kB)
May 1 11:13:50 saloon kernel: ivtv0: Registered device vbi8 for decoder
VBI (64 kB)
May 1 11:13:50 saloon kernel: ivtv0: Registered device vbi16 for
decoder VOUT
May 1 11:13:50 saloon kernel: ivtv0: Registered device video48 for
decoder YUV (1024 kB)
May 1 11:13:50 saloon kernel: ivtv0: Initialized card #0: Hauppauge
WinTV PVR-350
May 1 11:13:50 saloon kernel: ivtv: End initialization
May 1 11:13:51 saloon kernel: firmware: requesting v4l-cx2341x-enc.fw
May 1 11:13:51 saloon kernel: ivtv0: Loaded v4l-cx2341x-enc.fw firmware
(376836 bytes)
May 1 11:13:51 saloon kernel: firmware: requesting v4l-cx2341x-dec.fw
May 1 11:13:51 saloon kernel: ivtv0: Loaded v4l-cx2341x-dec.fw firmware
(262144 bytes)
May 1 11:13:51 saloon kernel: ivtv0: Encoder revision: 0x02060039
May 1 11:13:51 saloon kernel: ivtv0: Decoder revision: 0x02020023
May 1 11:13:51 saloon kernel: firmware: requesting v4l-cx2341x-init.mpg
May 1 11:13:51 saloon kernel: ivtv0: Loaded v4l-cx2341x-init.mpg
firmware (155648 bytes)
============================================================================================================================
lspci -vvv
============================================================================================================================
00:00.0 RAM memory: nVidia Corporation Device 0754 (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 82e2
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [94] HyperTransport: #1a
Capabilities: [60] HyperTransport: Retry Mode
Capabilities: [44] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=0 UnitCnt=0 MastHost- DefDir- DUL-
Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit
DwFcInEn- LWO=16bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+
<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit
DwFcInEn- LWO=8bit DwFcOutEn-
Revision ID: 3.00
Link Frequency 0: 1.0GHz
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz-
600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD+
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz-
600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE-
CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [d0] HyperTransport: #1c
00:01.0 ISA bridge: nVidia Corporation Device 075c (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 82e2
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.1 SMBus: nVidia Corporation Device 0752 (rev a1)
Subsystem: ASUSTeK Computer Inc. Device 82e2
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 255
Region 0: I/O ports at fc00 [size=64]
Region 4: I/O ports at 1c00 [size=64]
Region 5: I/O ports at 1c40 [size=64]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.2 RAM memory: nVidia Corporation Device 0751 (rev a1)
Subsystem: ASUSTeK Computer Inc. Device 82e2
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:01.3 Co-processor: nVidia Corporation Device 0753 (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 82e2
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 7
Region 0: Memory at fdf80000 (32-bit, non-prefetchable) [size=512K]
00:01.4 RAM memory: nVidia Corporation Device 0568 (rev a1)
Subsystem: ASUSTeK Computer Inc. Device 82e2
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:02.0 USB Controller: nVidia Corporation Device 077b (rev a1) (prog-if
10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device 82e2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd
00:02.1 USB Controller: nVidia Corporation Device 077c (rev a1) (prog-if
20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 82e2
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=00a0
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd
00:04.0 USB Controller: nVidia Corporation Device 077d (rev a1) (prog-if
10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device 82e2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd
00:04.1 USB Controller: nVidia Corporation Device 077e (rev a1) (prog-if
20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 82e2
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 21
Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=00a0
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: ehci_hcd
00:06.0 IDE interface: nVidia Corporation Device 0759 (rev a1) (prog-if
8a [Master SecP PriP])
Subsystem: Device f043:82e2
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[disabled] [size=1]
Region 4: I/O ports at f000 [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pata_amd
Kernel modules: pata_amd
00:07.0 Audio device: nVidia Corporation Device 0774 (rev a1)
Subsystem: ASUSTeK Computer Inc. Device 82fe
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at fe020000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+
Count=1/1 Enable-
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:08.0 PCI bridge: nVidia Corporation Device 075a (rev a1) (prog-if 01
[Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort+
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fa000000-fcffffff
Prefetchable memory behind bridge: ec000000-efffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: [b8] Subsystem: ASUSTeK Computer Inc. Device 82e2
Capabilities: [8c] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
00:09.0 IDE interface: nVidia Corporation Device 0ad0 (rev a2) (prog-if
85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device 82e2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at 09f0 [size=8]
Region 1: I/O ports at 0bf0 [size=4]
Region 2: I/O ports at 0970 [size=8]
Region 3: I/O ports at 0b70 [size=4]
Region 4: I/O ports at dc00 [size=16]
Region 5: Memory at fe026000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] SATA HBA <?>
Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+
Count=1/8 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [ec] HyperTransport: MSI Mapping Enable+ Fixed+
Kernel driver in use: ahci
00:0a.0 Ethernet controller: nVidia Corporation Device 0760 (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 82e2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at d800 [size=8]
Region 2: Memory at fe02a000 (32-bit, non-prefetchable) [size=256]
Region 3: Memory at fe029000 (32-bit, non-prefetchable) [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+
Count=1/16 Enable-
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
Kernel driver in use: forcedeth
Kernel modules: forcedeth
00:10.0 PCI bridge: nVidia Corporation Device 0778 (rev a1) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: f6000000-f9ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device 82e2
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+
Count=1/2 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency
L0 <512ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+
DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 1, PowerLimit 75.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range AB, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -3.5dB
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Kernel driver in use: pcieport-driver
00:12.0 PCI bridge: nVidia Corporation Device 075b (rev a1) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device 82e2
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+
Count=1/2 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <512ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 3, PowerLimit 10.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet-
Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Kernel driver in use: pcieport-driver
00:13.0 PCI bridge: nVidia Corporation Device 077a (rev a1) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fdc00000-fdcfffff
Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device 82e2
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+
Count=1/2 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <512ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 4, PowerLimit 10.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet-
Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Kernel driver in use: pcieport-driver
00:14.0 PCI bridge: nVidia Corporation Device 077a (rev a1) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00008000-00008fff
Memory behind bridge: fda00000-fdafffff
Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device 82e2
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+
Count=1/2 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <512ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 5, PowerLimit 10.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet-
Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Kernel driver in use: pcieport-driver
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>
Kernel driver in use: k8temp
Kernel modules: k8temp
01:09.0 Multimedia video controller: Internext Compression Inc iTVC15
MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR-350
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at ec000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ivtv
Kernel modules: ivtv
01:0b.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video
and Audio Decoder (rev 05)
Subsystem: Hauppauge computer works Inc. Device 9002
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+ INTx-
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: cx8800
01:0b.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and
Audio Decoder [MPEG Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Nova-T DVB-T Model 909
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+ INTx-
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: cx8802
01:0b.4 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and
Audio Decoder [IR Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Nova-T DVB-T Model 909
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 32 (1500ns min, 63750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 255
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:00.0 VGA compatible controller: nVidia Corporation Device 0641 (rev
a1) (prog-if 00 [VGA controller])
Subsystem: CardExpert Technology Device 1401
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f6000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at bc00 [size=128]
Expansion ROM at f9f80000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+
Count=1/1 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<512ns, L1 <4us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1,
Latency L0 <512ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [b4] Vendor Specific Information <?>
Capabilities: [100] Virtual Channel <?>
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information <?>
Kernel modules: nvidiafb
============================================================================================================================
_______________________________________________
ivtv-users mailing list
ivtv-users@ivtvdriver.org
http://ivtvdriver.org/mailman/listinfo/ivtv-users