Hi,
I recently bought an AverMedia M113-C PCI card based on Conexant
chipset which is not recognized by IVTV. Details are -
vendor/device: [4444:0016]
subsystem vendor/device: [1461:c034]
cx25841
There are cx23416 and cx25841 chips on the board.
Note: I am not subscribed to this mailing list.
More card details:
dmesg output -
[ 13.865322] ivtv: Start initialization, version 1.4.0
[ 13.865522] ivtv0: Initializing card #0
[ 13.865528] ivtv0: Unknown card: vendor/device: [4444:0016]
[ 13.865533] ivtv0: subsystem vendor/device: [1461:c034]
[ 13.865536] ivtv0: cx23416 based
[ 13.865538] ivtv0: Defaulting to Hauppauge WinTV PVR-150 card
[ 13.865541] ivtv0: Please mail the vendor/device and subsystem
vendor/device IDs and what kind of
[ 13.865544] ivtv0: card you have to the ivtv-devel mailinglist
(www.ivtvdriver.org)
[ 13.865546] ivtv0: Prefix your subject line with [UNKNOWN IVTV CARD].
[ 13.865598] ivtv 0000:06:04.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 13.865609] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
[ 13.867257] tveeprom 0-0050: Huh, no eeprom present (err=-6)?
[ 13.867260] tveeprom 0-0050: Encountered bad packet header [fc].
Corrupt or not a Hauppauge eeprom.
[ 13.867264] ivtv0: Invalid EEPROM
[ 14.005243] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 14.005477] CONFIG_NF_CT_ACCT is deprecated and will be removed
soon. Please use
[ 14.005480] nf_conntrack.acct=1 kernel paramater, acct=1
nf_conntrack module option or
[ 14.005483] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 14.028837] cx25840 0-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0)
[ 14.031197] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
[ 14.031226] wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
[ 14.034222] wm8775 0-001b: I2C: cannot write 000 to register R23
[ 14.037203] wm8775 0-001b: I2C: cannot write 000 to register R7
[ 14.040185] wm8775 0-001b: I2C: cannot write 021 to register R11
[ 14.043151] wm8775 0-001b: I2C: cannot write 102 to register R12
[ 14.046124] wm8775 0-001b: I2C: cannot write 000 to register R13
[ 14.049160] wm8775 0-001b: I2C: cannot write 1d4 to register R14
[ 14.052128] wm8775 0-001b: I2C: cannot write 1d4 to register R15
[ 14.055090] wm8775 0-001b: I2C: cannot write 1bf to register R16
[ 14.058457] wm8775 0-001b: I2C: cannot write 185 to register R17
[ 14.061432] wm8775 0-001b: I2C: cannot write 0a2 to register R18
[ 14.064481] wm8775 0-001b: I2C: cannot write 005 to register R19
[ 14.067444] wm8775 0-001b: I2C: cannot write 07a to register R20
[ 14.075283] wm8775 0-001b: I2C: cannot write 102 to register R21
[ 14.075681] ivtv0: Registered device video0 for encoder MPG (4096 kB)
[ 14.075743] ivtv0: Registered device video32 for encoder YUV (2048 kB)
[ 14.075803] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
[ 14.075866] ivtv0: Registered device video24 for encoder PCM (320 kB)
[ 14.075924] ivtv0: Registered device radio0 for encoder radio
[ 14.075928] ivtv0: Initialized card #0: Hauppauge WinTV PVR-150
[ 14.075975] ivtv: End initialization
_______________________________________________
ivtv-devel mailing list
ivtv-devel@ivtvdriver.org
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
I recently bought an AverMedia M113-C PCI card based on Conexant
chipset which is not recognized by IVTV. Details are -
vendor/device: [4444:0016]
subsystem vendor/device: [1461:c034]
cx25841
There are cx23416 and cx25841 chips on the board.
Note: I am not subscribed to this mailing list.
More card details:
dmesg output -
[ 13.865322] ivtv: Start initialization, version 1.4.0
[ 13.865522] ivtv0: Initializing card #0
[ 13.865528] ivtv0: Unknown card: vendor/device: [4444:0016]
[ 13.865533] ivtv0: subsystem vendor/device: [1461:c034]
[ 13.865536] ivtv0: cx23416 based
[ 13.865538] ivtv0: Defaulting to Hauppauge WinTV PVR-150 card
[ 13.865541] ivtv0: Please mail the vendor/device and subsystem
vendor/device IDs and what kind of
[ 13.865544] ivtv0: card you have to the ivtv-devel mailinglist
(www.ivtvdriver.org)
[ 13.865546] ivtv0: Prefix your subject line with [UNKNOWN IVTV CARD].
[ 13.865598] ivtv 0000:06:04.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 13.865609] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
[ 13.867257] tveeprom 0-0050: Huh, no eeprom present (err=-6)?
[ 13.867260] tveeprom 0-0050: Encountered bad packet header [fc].
Corrupt or not a Hauppauge eeprom.
[ 13.867264] ivtv0: Invalid EEPROM
[ 14.005243] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 14.005477] CONFIG_NF_CT_ACCT is deprecated and will be removed
soon. Please use
[ 14.005480] nf_conntrack.acct=1 kernel paramater, acct=1
nf_conntrack module option or
[ 14.005483] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 14.028837] cx25840 0-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0)
[ 14.031197] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
[ 14.031226] wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
[ 14.034222] wm8775 0-001b: I2C: cannot write 000 to register R23
[ 14.037203] wm8775 0-001b: I2C: cannot write 000 to register R7
[ 14.040185] wm8775 0-001b: I2C: cannot write 021 to register R11
[ 14.043151] wm8775 0-001b: I2C: cannot write 102 to register R12
[ 14.046124] wm8775 0-001b: I2C: cannot write 000 to register R13
[ 14.049160] wm8775 0-001b: I2C: cannot write 1d4 to register R14
[ 14.052128] wm8775 0-001b: I2C: cannot write 1d4 to register R15
[ 14.055090] wm8775 0-001b: I2C: cannot write 1bf to register R16
[ 14.058457] wm8775 0-001b: I2C: cannot write 185 to register R17
[ 14.061432] wm8775 0-001b: I2C: cannot write 0a2 to register R18
[ 14.064481] wm8775 0-001b: I2C: cannot write 005 to register R19
[ 14.067444] wm8775 0-001b: I2C: cannot write 07a to register R20
[ 14.075283] wm8775 0-001b: I2C: cannot write 102 to register R21
[ 14.075681] ivtv0: Registered device video0 for encoder MPG (4096 kB)
[ 14.075743] ivtv0: Registered device video32 for encoder YUV (2048 kB)
[ 14.075803] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
[ 14.075866] ivtv0: Registered device video24 for encoder PCM (320 kB)
[ 14.075924] ivtv0: Registered device radio0 for encoder radio
[ 14.075928] ivtv0: Initialized card #0: Hauppauge WinTV PVR-150
[ 14.075975] ivtv: End initialization
_______________________________________________
ivtv-devel mailing list
ivtv-devel@ivtvdriver.org
http://ivtvdriver.org/mailman/listinfo/ivtv-devel