I just installed an HVR 1600 in a MythTV backend that already has a PVR
150 running on F10 with all updates. The first thing I discovered was
that this card didn't work with the stock cx18 driver. However,
downloading the tarball from linuxtv.org and installing it fixed that
problem. The card now seems to work fine (some pixelation every now and
then, but that might be because the CPU is too slow).
The problem I've run into now is that if I start watching TV under
MythTV, the server picks the 1600's NTSC input first (I know about
priorities and I'll look at that later). The picture is fine at this
point - it fits the window I'm running in. If I then switch to the PVR
150 input the picture is wider than the window. The aspect ratio and
adjust fill options under the menu for live tv don't affect this.
I've tried restarting MythTV and reloading the drivers. The problem
remains. As long as I start with the 1600 NTSC input (not sure if the
same happens with the ATSC input) and then switch to the 150 input the
picture is too wide on the 150.
Switching back to the 1600 NTSC input gives a perfectly fine picture.
Anyone seen this behaviour? Is there something I can do with the
drivers or under MythTV to force the screen size to fit properly in the
window I'm running in?
Model: WinTV-HVR 1600 1199 (74041 LF Rev C6B2)
kernel-2.6.27.19-170.2.35.fc10.i686,
kernel-devel-2.6.27.19-170.2.35.fc10.i686
Driver info:
mjhammel(tty1)$ modinfo cx18
filename: /lib/modules/2.6.27.19-170.2.35.fc10.i686/kernel/drivers/media/video/cx18/cx18.ko
version: 1.1.0
license: GPL
description: CX23418 driver
author: Hans Verkuil
srcversion: 16340C330FF4EE0E9CE9A3B
alias: pci:v000014F1d00005B7Asv*sd*bc*sc*i*
depends:
dvb-core,cx2341x,v4l2-common,videodev,tveeprom,i2c-core,i2c-algo-bit
vermagic: 2.6.27.19-170.2.35.fc10.i686 SMP mod_unload 686
4KSTACKS
--
Michael J. Hammel <ivtv@graphics-muse.org>
_______________________________________________
ivtv-devel mailing list
ivtv-devel@ivtvdriver.org
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
150 running on F10 with all updates. The first thing I discovered was
that this card didn't work with the stock cx18 driver. However,
downloading the tarball from linuxtv.org and installing it fixed that
problem. The card now seems to work fine (some pixelation every now and
then, but that might be because the CPU is too slow).
The problem I've run into now is that if I start watching TV under
MythTV, the server picks the 1600's NTSC input first (I know about
priorities and I'll look at that later). The picture is fine at this
point - it fits the window I'm running in. If I then switch to the PVR
150 input the picture is wider than the window. The aspect ratio and
adjust fill options under the menu for live tv don't affect this.
I've tried restarting MythTV and reloading the drivers. The problem
remains. As long as I start with the 1600 NTSC input (not sure if the
same happens with the ATSC input) and then switch to the 150 input the
picture is too wide on the 150.
Switching back to the 1600 NTSC input gives a perfectly fine picture.
Anyone seen this behaviour? Is there something I can do with the
drivers or under MythTV to force the screen size to fit properly in the
window I'm running in?
Model: WinTV-HVR 1600 1199 (74041 LF Rev C6B2)
kernel-2.6.27.19-170.2.35.fc10.i686,
kernel-devel-2.6.27.19-170.2.35.fc10.i686
Driver info:
mjhammel(tty1)$ modinfo cx18
filename: /lib/modules/2.6.27.19-170.2.35.fc10.i686/kernel/drivers/media/video/cx18/cx18.ko
version: 1.1.0
license: GPL
description: CX23418 driver
author: Hans Verkuil
srcversion: 16340C330FF4EE0E9CE9A3B
alias: pci:v000014F1d00005B7Asv*sd*bc*sc*i*
depends:
dvb-core,cx2341x,v4l2-common,videodev,tveeprom,i2c-core,i2c-algo-bit
vermagic: 2.6.27.19-170.2.35.fc10.i686 SMP mod_unload 686
4KSTACKS
--
Michael J. Hammel <ivtv@graphics-muse.org>
_______________________________________________
ivtv-devel mailing list
ivtv-devel@ivtvdriver.org
http://ivtvdriver.org/mailman/listinfo/ivtv-devel