Mailing List Archive: [Fwd: Whats this error]

[Fwd: Whats this error]

Jun 25, 2002, 1:33 PM

Post #1 of 3 (490 views)

Well, I have turned off whatever filters I thought I had enabled. Turned
back on most of the inet daemons I had turned
off, rebuilt conserver-7.2.2 and receive the same error message -
Connection refused.

nsswitch has files as the lookup method for hosts, and the etc/hosts has
the address, fqdn and console on the line.

/etc/services has

console 782/tcp conserver # console server

in it.

So, I am not sure what else needs to be changed. I know I must be
shooting myself in the foot somewhere, 'cause this can't
be that difficult to run.

The only other thing I can think of is that this system has dual nets. 1
on the public side and a private side that has the actual console
servers.

Any other suggestions would be appreciated.

Re: [Fwd: Whats this error] [ In reply to ]

mtdolan at twinight

Jun 25, 2002, 1:43 PM

Post #2 of 3 (484 views)

Permalink

You might try:

console -M ip_addr -P

to see if it can even connect to the conserver daemon on the host. that
should report the PID of the conserver daemon running on "ip_addr".

then try

console -M console -P

On 25 Jun 2002, Christopher Fowler wrote:

> Date: 25 Jun 2002 16:44:05 -0400
> From: Christopher Fowler <cfowler@outpostsentinel.com>
> To: George Milder <gmilder@cats.ucsc.edu>
> Cc: users@conserver.com
> Subject: Re: [Fwd: Whats this error]
>
> When all else fails, use strace to trace the system calls. You'll know
> where this is failing and how to fix it.

Re: [Fwd: Whats this error] [ In reply to ]

cfowler at outpostsentinel

Jun 25, 2002, 1:44 PM

Post #3 of 3 (485 views)

Permalink

When all else fails, use strace to trace the system calls. You'll know
where this is failing and how to fix it.

On Tue, 2002-06-25 at 16:33, George Milder wrote:
> Well, I have turned off whatever filters I thought I had enabled. Turned
> back on most of the inet daemons I had turned
> off, rebuilt conserver-7.2.2 and receive the same error message -
> Connection refused.
>
> nsswitch has files as the lookup method for hosts, and the etc/hosts has
> the address, fqdn and console on the line.
>
> /etc/services has
>
> console 782/tcp conserver # console server
>
> in it.
>
> So, I am not sure what else needs to be changed. I know I must be
> shooting myself in the foot somewhere, 'cause this can't
> be that difficult to run.
>
> The only other thing I can think of is that this system has dual nets. 1
> on the public side and a private side that has the actual console
> servers.
>
> Any other suggestions would be appreciated.
> ----
>

> From: Bryan Stansell <bryan@conserver.com>
> To: users@conserver.com
> Subject: Re: Whats this error
> Date: 21 Jun 2002 14:49:30 -0700
>
> On Fri, Jun 21, 2002 at 02:11:21PM -0700, George Milder wrote:
> > I just built the conserver 7.2.2 and when I run console I get
> >
> > console: connect: 782@console: Connection refused
> >
> > Can someone tell me where I went wrong.
>
> the client is trying to connect to port 782 of the host named
> 'console'. the server isn't up and listening on that port on that
> host. so, either 'console' isn't the host you expect, or the server
> didn't start properly (check the logs), or you have other issues (like
> filters). anyway, there's a few things to check and look out
> for...hopefully that'll get you going.
>
> Bryan
> _______________________________________________
> users mailing list
> users@conserver.com
> https://www.conserver.com/mailman/listinfo/users
>

Mailing List Archive

Mailing List Archive

Attached Files: