Hello,
My gateway as5350 has two E1 interface.
I have defined
radius-server host zzzz auth-port 1812 acc-port 1813
I work gw-to-gw.
call application voice remote_ip
flash:app_remote_ip_authenticate.2.0.0.tcl
dial-peer voice 200 voip
permission orig
huntstop
application remote_ip
incoming called-number ^9054T
!
dial-peer voice 1 pots
permission term
huntstop
destination-pattern 9054T
port 3/1:0
forward-digits 11
prefix ,
I terminate calls with GSM channel bank.
controller E1 3/0
ds0-group 0 timeslots 1-15,17-28 type r2-digital
controller E1 3/1
ds0-group 1 timeslots 1-15,17-28 type r2-digital
till here all thing is normal. I work properly. But now I want to work with the following scenario:
I will define two radius with
aaa group server radius rad1
server xxxx
aaa group server radius rad2
server yyyy
I want to use rad1 for controller e1 3/0 and rad2 for controller e1 3/1.
Two different types of call come with prefix 3547#number(to e1 3/0) and 9878#number (to e1 3/1).
But I dont know how can I define rad1 to e1 3/0 and rad2 to e1 3/1.
I think that I must define rad1 and rad2 to dial-peers separately. But how?
can you help me,pls?
---------------------------------
Do you Yahoo!?
Vote for the stars of Yahoo!'s next ad campaign!
My gateway as5350 has two E1 interface.
I have defined
radius-server host zzzz auth-port 1812 acc-port 1813
I work gw-to-gw.
call application voice remote_ip
flash:app_remote_ip_authenticate.2.0.0.tcl
dial-peer voice 200 voip
permission orig
huntstop
application remote_ip
incoming called-number ^9054T
!
dial-peer voice 1 pots
permission term
huntstop
destination-pattern 9054T
port 3/1:0
forward-digits 11
prefix ,
I terminate calls with GSM channel bank.
controller E1 3/0
ds0-group 0 timeslots 1-15,17-28 type r2-digital
controller E1 3/1
ds0-group 1 timeslots 1-15,17-28 type r2-digital
till here all thing is normal. I work properly. But now I want to work with the following scenario:
I will define two radius with
aaa group server radius rad1
server xxxx
aaa group server radius rad2
server yyyy
I want to use rad1 for controller e1 3/0 and rad2 for controller e1 3/1.
Two different types of call come with prefix 3547#number(to e1 3/0) and 9878#number (to e1 3/1).
But I dont know how can I define rad1 to e1 3/0 and rad2 to e1 3/1.
I think that I must define rad1 and rad2 to dial-peers separately. But how?
can you help me,pls?
---------------------------------
Do you Yahoo!?
Vote for the stars of Yahoo!'s next ad campaign!