Hello,
I try to setup voip at our office, I got the following configuration:
Cisco 7900 phones, cisco 3725 router with cme (see show version at the
end) and a vic2bri isdn card.
I did setup two test phones with number 1 and 2, they work perfectly
for internal communications (7920 phones).
But I want to be able to phone outside (the world is very small with
only one peer number).
I tried a lot of things without success.
I got three isdn numbers, I want them to be mapped to internal numbers.
I got 024 426 07 21 that should be mapped to internal number 1.
I got 024 426 07 31 that should be mapped to internal number 2.
The third number should not be used now.
In my test configuration, I configured the interface to answer only for
024 426 07 21, that's normal, because other number are currently used
in production.
The current state is:
When I call from the outside on 024 426 07 21 I hear a tone very loudly
(too loudly) and after a little moment, I hear a disconnected tone.
When I try to call from the inside (what I want is to do 0 for the
outside, and then dial my number, for example, if I want to dial 024
555 555 555 I do 0 024 555 555 555). I want to have a different tone
when I press 0.
But with the current configuration, at the second I press 0, I hear a
disconnected tone and the debug log show Invalid information element
contents (see debug bellow).
I had that with
dial-peer voice 10 pots
destination-pattern 0
now with
dial-peer voice 10 pots
destination-pattern 0T
I hear the second dial tone, I can dial a number, then I press # or
wait and I got the same result as before (except in the log I don't
have Called Party Number i = 0x80, '0' but in place of the 0 I got
"0mynumber").
I tried a lot of things and I browsed the cisco website for hours and
hours. If somebody can give me a solution that would help me greatly.
Best Regards
Goyman
Goyman.com SA
Debug, what's happen when I pick up a phone and press 0 (the pstn
prefix I want) with debug isdn stand:
30064771072:12884901888:103079215104: ISDN BR1/0 EVENTd: isdn_get_guid:
Got Guid 90D4DD5B80D4
30064771072:12884901888:103079215104: ISDN BR1/0 EVENT:
process_bri_call: call id 0x8026, called_number 0, Guid
90D4DD5B80D4speed 0, call type VOICE, calling_number 0244260721Received
pdata len 0x3F data:1C 39 9E 1 0 3 67 74 64 0 0 0 2E 49 41 4D 2C D A 47
43 49 2C 39 30 64 34 64 64 35 62 39 33 64 35 31 31 64 38 38 30 64 34 39
64 38 32 36 62 32 36 36 37 61 66 D A D A 1E 2 81 83
30064771072:12884901888:103079215104: ISDN BR1/0 EVENTd:
process_bri_call: No name in GTD
30064771072:12884901888:103079215104: ISDN BR1/0 Q931: Applying
typeplan for sw-type 0x1 is 0x0 0x0, Calling num 0244260721
03:24:05: ISDN BR1/0 EVENTd: calltrkr_setup_received:
isdn_info=1695718000l, call_id=0x8026 ORIGINATE
03:24:05: ISDN BR1/0 EVENTd: calltrkr_setup_received: calltracker
disabled
03:24:05: ISDN BR1/0 Q931: TX -> SETUP pd = 8 callref = 0x23
Bearer Capability i = 0x8090A2
Standard = CCITT
Transer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x81
Progress Ind i = 0x8183 - Origination address is non-ISDN
Calling Party Number i = 0x0080, '0244260721'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x80, '0'
Plan:Unknown, Type:Unknown
03:24:05: ISDN BR1/0 Q931: RX <- RELEASE_COMP pd = 8 callref = 0xA3
Cause i = 0x82E404 - Invalid information element contents
03:24:05: ISDN BR1/0 BACKHAUL: L3IF_rx_L2_pak: received data
0x0801A35A080382E404
03:24:05: ISDN EVENTd: cc_clear_free_list freed 0x64C19560
30064771072:12884901888:103079215104: ISDN BR1/0 EVENT:
process_rxstate: ces/callid 1/0x8026 calltype 2 HOST_DISCONNECT_ACK
30064771072:12884901888:103079215104: ISDN BR1/0 EVENTd:
process_rxstate: cause=0x64 (100), cause_present=1
30064771072:12884901888:103079215104: ISDN BR1/0 EVENTd:
calltrkr_call_cleared: isdn_info=0x65129A70, call_id=0x8026
30064771072:12884901888:103079215104: ISDN CDAPI: cdapi_find_tsm found
a GTD message RLC,
PRN,isdn*,,,
:
end of gtd length is 22
And I got thos line that come every 2 second (estimation) after trying
to call:
03:24:39: ISDN BR1/0 SERROR: L2_Go: at bailout DLCB is NULL
L2: sapi 0 tei 85 ces 255 ev 0x1
Relevant configuration:
!
translation-rule 1
Rule 0 1 0244260721
!
!
interface BRI1/0
no ip address
isdn switch-type basic-net3
isdn incoming-voice voice
isdn answer1 0244260721
!
interface BRI1/1
no ip address
!
!
!
tftp-server slot0:CP7902010200SCCP031023A.sbin
!
!
!
!
voice-port 1/0/0
cptone CH
!
voice-port 1/0/1
!
!
!
!
!
dial-peer voice 10 pots
destination-pattern 0T
translate-outgoing calling 1
port 1/0/0
forward-digits all
!
!
!
telephony-service
load 7902 CP7902010200SCCP031023A
max-ephones 2
max-dn 5
ip source-address 192.168.101.1 port 2000
auto assign 1 to 2 type 7902
user-locale FR
network-locale CH
create cnf-files version-stamp 7960 Apr 06 2004 17:37:29
dialplan-pattern 1 0244260715 extension-length 1 extension-pattern 0
max-conferences 8
moh music-on-hold.au
web admin system name admin secret 5 $1$9M.7$Rf7q9bEpPiAvevFtaFr8H0
transfer-system full-consult
secondary-dialtone 0
!
!
ephone-dn 1 dual-line
number 1
!
!
ephone-dn 2 dual-line
number 2
!
!
ephone 1
mac-address 000E.D7DF.7457
type 7902
button 1:1
!
!
!
ephone 2
mac-address 000F.23FC.A8AC
type 7902
button 1:2
!
!
omoikane#show dial-peer voice 10
VoiceEncapPeer10
peer type = voice, information type = voice,
description = `',
tag = 10, destination-pattern = `0',
answer-address = `', preference=0,
CLID Restriction = None
CLID Network Number = `'
CLID Second Number sent
source carrier-id = `', target carrier-id = `',
source trunk-group-label = `', target trunk-group-label = `',
numbering Type = `unknown'
group = 10, Admin state is up, Operation state is up,
incoming called-number = `', connections/maximum = 0/unlimited,
DTMF Relay = disabled,
URI classes:
Destination =
huntstop = disabled,
in bound application associated: 'DEFAULT'
out bound application associated: ''
dnis-map =
permission :both
incoming COR list:maximum capability
outgoing COR list:minimum requirement
Translation profile (Incoming):
Translation profile (Outgoing):
incoming call blocking:
translation-profile = `'
disconnect-cause = `no-service'
advertise 0x40 capacity_update_timer 25 addrFamily 4
oldAddrFamily 4
type = pots, prefix = `',
forward-digits all
session-target = `', voice-port = `1/0/0',
direct-inward-dial = disabled,
digit_strip = enabled,
register E.164 number with H323 GK and/or SIP Registrar = TRUE
fax rate = system, payload size = 20 bytes
supported-language = ''
Time elapsed since last clearing of voice call statistics never
Connect Time = 0, Charged Units = 0,
Successful Calls = 4, Failed Calls = 34, Incomplete Calls = 0
Accepted Calls = 24, Refused Calls = 1,
Last Disconnect Cause is "64 ",
Last Disconnect Text is "invalid ie contents (100)",
Last Setup Time = 1224550.
omoikane#show version
Cisco IOS Software, 3700 Software (C3725-ADVENTERPRISEK9-M), Version
12.3(7)T, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by Cisco Systems, Inc.
Compiled Sat 21-Feb-04 02:13 by eaarmas
ROM: System Bootstrap, Version 12.2(8r)T2, RELEASE SOFTWARE (fc1)
omoikane uptime is 3 hours, 27 minutes
System returned to ROM by power-on
System restarted at 19:26:46 CEST Thu Apr 22 2004
System image file is "flash:c3725-adventerprisek9-mz.123-7.T.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be
found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco 3725 (R7000) processor (revision 0.1) with 196608K/65536K bytes
of memory.
Processor board ID JHY0732K2LC
R7000 CPU at 240MHz, Implementation 39, Rev 3.3, 256KB L2 Cache
2 FastEthernet interfaces
2 ISDN Basic Rate interfaces
4 Voice NT or TE BRI interfaces
DRAM configuration is 64 bits wide with parity disabled.
55K bytes of NVRAM.
31744K bytes of ATA System CompactFlash (Read/Write)
62720K bytes of ATA Slot0 CompactFlash (Read/Write)
Configuration register is 0x2102
I try to setup voip at our office, I got the following configuration:
Cisco 7900 phones, cisco 3725 router with cme (see show version at the
end) and a vic2bri isdn card.
I did setup two test phones with number 1 and 2, they work perfectly
for internal communications (7920 phones).
But I want to be able to phone outside (the world is very small with
only one peer number).
I tried a lot of things without success.
I got three isdn numbers, I want them to be mapped to internal numbers.
I got 024 426 07 21 that should be mapped to internal number 1.
I got 024 426 07 31 that should be mapped to internal number 2.
The third number should not be used now.
In my test configuration, I configured the interface to answer only for
024 426 07 21, that's normal, because other number are currently used
in production.
The current state is:
When I call from the outside on 024 426 07 21 I hear a tone very loudly
(too loudly) and after a little moment, I hear a disconnected tone.
When I try to call from the inside (what I want is to do 0 for the
outside, and then dial my number, for example, if I want to dial 024
555 555 555 I do 0 024 555 555 555). I want to have a different tone
when I press 0.
But with the current configuration, at the second I press 0, I hear a
disconnected tone and the debug log show Invalid information element
contents (see debug bellow).
I had that with
dial-peer voice 10 pots
destination-pattern 0
now with
dial-peer voice 10 pots
destination-pattern 0T
I hear the second dial tone, I can dial a number, then I press # or
wait and I got the same result as before (except in the log I don't
have Called Party Number i = 0x80, '0' but in place of the 0 I got
"0mynumber").
I tried a lot of things and I browsed the cisco website for hours and
hours. If somebody can give me a solution that would help me greatly.
Best Regards
Goyman
Goyman.com SA
Debug, what's happen when I pick up a phone and press 0 (the pstn
prefix I want) with debug isdn stand:
30064771072:12884901888:103079215104: ISDN BR1/0 EVENTd: isdn_get_guid:
Got Guid 90D4DD5B80D4
30064771072:12884901888:103079215104: ISDN BR1/0 EVENT:
process_bri_call: call id 0x8026, called_number 0, Guid
90D4DD5B80D4speed 0, call type VOICE, calling_number 0244260721Received
pdata len 0x3F data:1C 39 9E 1 0 3 67 74 64 0 0 0 2E 49 41 4D 2C D A 47
43 49 2C 39 30 64 34 64 64 35 62 39 33 64 35 31 31 64 38 38 30 64 34 39
64 38 32 36 62 32 36 36 37 61 66 D A D A 1E 2 81 83
30064771072:12884901888:103079215104: ISDN BR1/0 EVENTd:
process_bri_call: No name in GTD
30064771072:12884901888:103079215104: ISDN BR1/0 Q931: Applying
typeplan for sw-type 0x1 is 0x0 0x0, Calling num 0244260721
03:24:05: ISDN BR1/0 EVENTd: calltrkr_setup_received:
isdn_info=1695718000l, call_id=0x8026 ORIGINATE
03:24:05: ISDN BR1/0 EVENTd: calltrkr_setup_received: calltracker
disabled
03:24:05: ISDN BR1/0 Q931: TX -> SETUP pd = 8 callref = 0x23
Bearer Capability i = 0x8090A2
Standard = CCITT
Transer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x81
Progress Ind i = 0x8183 - Origination address is non-ISDN
Calling Party Number i = 0x0080, '0244260721'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x80, '0'
Plan:Unknown, Type:Unknown
03:24:05: ISDN BR1/0 Q931: RX <- RELEASE_COMP pd = 8 callref = 0xA3
Cause i = 0x82E404 - Invalid information element contents
03:24:05: ISDN BR1/0 BACKHAUL: L3IF_rx_L2_pak: received data
0x0801A35A080382E404
03:24:05: ISDN EVENTd: cc_clear_free_list freed 0x64C19560
30064771072:12884901888:103079215104: ISDN BR1/0 EVENT:
process_rxstate: ces/callid 1/0x8026 calltype 2 HOST_DISCONNECT_ACK
30064771072:12884901888:103079215104: ISDN BR1/0 EVENTd:
process_rxstate: cause=0x64 (100), cause_present=1
30064771072:12884901888:103079215104: ISDN BR1/0 EVENTd:
calltrkr_call_cleared: isdn_info=0x65129A70, call_id=0x8026
30064771072:12884901888:103079215104: ISDN CDAPI: cdapi_find_tsm found
a GTD message RLC,
PRN,isdn*,,,
:
end of gtd length is 22
And I got thos line that come every 2 second (estimation) after trying
to call:
03:24:39: ISDN BR1/0 SERROR: L2_Go: at bailout DLCB is NULL
L2: sapi 0 tei 85 ces 255 ev 0x1
Relevant configuration:
!
translation-rule 1
Rule 0 1 0244260721
!
!
interface BRI1/0
no ip address
isdn switch-type basic-net3
isdn incoming-voice voice
isdn answer1 0244260721
!
interface BRI1/1
no ip address
!
!
!
tftp-server slot0:CP7902010200SCCP031023A.sbin
!
!
!
!
voice-port 1/0/0
cptone CH
!
voice-port 1/0/1
!
!
!
!
!
dial-peer voice 10 pots
destination-pattern 0T
translate-outgoing calling 1
port 1/0/0
forward-digits all
!
!
!
telephony-service
load 7902 CP7902010200SCCP031023A
max-ephones 2
max-dn 5
ip source-address 192.168.101.1 port 2000
auto assign 1 to 2 type 7902
user-locale FR
network-locale CH
create cnf-files version-stamp 7960 Apr 06 2004 17:37:29
dialplan-pattern 1 0244260715 extension-length 1 extension-pattern 0
max-conferences 8
moh music-on-hold.au
web admin system name admin secret 5 $1$9M.7$Rf7q9bEpPiAvevFtaFr8H0
transfer-system full-consult
secondary-dialtone 0
!
!
ephone-dn 1 dual-line
number 1
!
!
ephone-dn 2 dual-line
number 2
!
!
ephone 1
mac-address 000E.D7DF.7457
type 7902
button 1:1
!
!
!
ephone 2
mac-address 000F.23FC.A8AC
type 7902
button 1:2
!
!
omoikane#show dial-peer voice 10
VoiceEncapPeer10
peer type = voice, information type = voice,
description = `',
tag = 10, destination-pattern = `0',
answer-address = `', preference=0,
CLID Restriction = None
CLID Network Number = `'
CLID Second Number sent
source carrier-id = `', target carrier-id = `',
source trunk-group-label = `', target trunk-group-label = `',
numbering Type = `unknown'
group = 10, Admin state is up, Operation state is up,
incoming called-number = `', connections/maximum = 0/unlimited,
DTMF Relay = disabled,
URI classes:
Destination =
huntstop = disabled,
in bound application associated: 'DEFAULT'
out bound application associated: ''
dnis-map =
permission :both
incoming COR list:maximum capability
outgoing COR list:minimum requirement
Translation profile (Incoming):
Translation profile (Outgoing):
incoming call blocking:
translation-profile = `'
disconnect-cause = `no-service'
advertise 0x40 capacity_update_timer 25 addrFamily 4
oldAddrFamily 4
type = pots, prefix = `',
forward-digits all
session-target = `', voice-port = `1/0/0',
direct-inward-dial = disabled,
digit_strip = enabled,
register E.164 number with H323 GK and/or SIP Registrar = TRUE
fax rate = system, payload size = 20 bytes
supported-language = ''
Time elapsed since last clearing of voice call statistics never
Connect Time = 0, Charged Units = 0,
Successful Calls = 4, Failed Calls = 34, Incomplete Calls = 0
Accepted Calls = 24, Refused Calls = 1,
Last Disconnect Cause is "64 ",
Last Disconnect Text is "invalid ie contents (100)",
Last Setup Time = 1224550.
omoikane#show version
Cisco IOS Software, 3700 Software (C3725-ADVENTERPRISEK9-M), Version
12.3(7)T, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by Cisco Systems, Inc.
Compiled Sat 21-Feb-04 02:13 by eaarmas
ROM: System Bootstrap, Version 12.2(8r)T2, RELEASE SOFTWARE (fc1)
omoikane uptime is 3 hours, 27 minutes
System returned to ROM by power-on
System restarted at 19:26:46 CEST Thu Apr 22 2004
System image file is "flash:c3725-adventerprisek9-mz.123-7.T.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be
found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco 3725 (R7000) processor (revision 0.1) with 196608K/65536K bytes
of memory.
Processor board ID JHY0732K2LC
R7000 CPU at 240MHz, Implementation 39, Rev 3.3, 256KB L2 Cache
2 FastEthernet interfaces
2 ISDN Basic Rate interfaces
4 Voice NT or TE BRI interfaces
DRAM configuration is 64 bits wide with parity disabled.
55K bytes of NVRAM.
31744K bytes of ATA System CompactFlash (Read/Write)
62720K bytes of ATA Slot0 CompactFlash (Read/Write)
Configuration register is 0x2102