Mailing List Archive

Disconnect Request and POD problem
Hi,

I have problem using disconnect request for Cisco AS5300. I'm using
Radiator-3.8 radius server.
I use utility radpwtst to send disconnect-request directly to NAS but it
replies Disconnect-Request-NAKed.

Is there anybody who solved this problem before?
Is there anybody who successfully used POD and Disconnect-request in Cisco
AS5300?
What kind of attribute combination should I send to NAS?

What is Cisco IOS version known to work with disconnect-request?

Actually I tested disconnect request on Dial-UP Cisco NAS server and it
works just fine.
But it is NOT working on VoIP.

We are trying to implement this feature in VoIP application.
I appreciate very much if somebody can share its experience.

I tried with Session id attribute and no result. I even tried with
h-323-conf-id, h323-call-origin attributes, but didn't succeed.

Cisco AS5300 configuration:

aaa pod server auth-type any server-key xxx

Following is the debug output:

#debug aaa pod
#AAA POD packet processing debugging is on
#ter mon
#
Apr 8 00:23:47.933: POD: x.x.x.x request queued
Apr 8 00:23:47.933: POD: x.x.x.x user 37255740 0.0.0.0 sessid 0x0 key 0x0
Apr 8 00:23:47.933: POD: Line User IDB Session Id Key
Apr 8 00:23:47.933: POD: Sending NAK to x.x.x.x/50158
#

Cisco IOS version is :
Cisco Internetwork Operating System SoftwareIOS (tm) 5300 Software
(C5300-IS-M), Experimental Version 12.2(20020211:190758)

Debug log says request queued and sends NAK. What should I do? Can you give
me some recommendation?


thanks in advance,

Ganbold
Disconnect Request and POD problem [ In reply to ]
Hi,

I have problem using disconnect request for Cisco AS5300. I'm using
Radiator-3.8 radius server.
I use utility radpwtst to send disconnect-request directly to NAS but it
replies Disconnect-Request-NAKed.

Is there anybody who solved this problem before?
Is there anybody who successfully used POD and Disconnect-request in Cisco
AS5300?
What kind of attribute combination should I send to NAS?

What is Cisco IOS version known to work with disconnect-request?

Actually I tested disconnect request on Dial-UP Cisco NAS server and it
works just fine.
But it is NOT working on VoIP.

We are trying to implement this feature in VoIP application.
I appreciate very much if somebody can share its experience.

I tried with Session id attribute and no result. I even tried with
h-323-conf-id, h323-call-origin attributes, but didn't succeed.

Cisco AS5300 configuration:

aaa pod server auth-type any server-key xxx

Following is the debug output:

#debug aaa pod
#AAA POD packet processing debugging is on
#ter mon
#
Apr 8 00:23:47.933: POD: x.x.x.x request queued
Apr 8 00:23:47.933: POD: x.x.x.x user 37255740 0.0.0.0 sessid 0x0 key 0x0
Apr 8 00:23:47.933: POD: Line User IDB Session Id Key
Apr 8 00:23:47.933: POD: Sending NAK to x.x.x.x/50158
#

Cisco IOS version is :
Cisco Internetwork Operating System SoftwareIOS (tm) 5300 Software
(C5300-IS-M), Experimental Version 12.2(20020211:190758)

Debug log says request queued and sends NAK. What should I do? Can you give
me some recommendation?


thanks in advance,

Ganbold