Hi,
I have the implemented the following scheme:
Siemens HiComm PBX <--- E1 PRI ---> Cisco AS 5350 <--- E1 PRI ---> PSTN
Telecom
The ISDN "switch-type" is net5 (aka ETSI).
The Telco is supposed to send us AOC charging units. That has to be sent to
the Siemens PBX which takes care of charging / billing every call.
The problem is that Cisco does *not* always forward the AOC message to the
PBX.
Here is an example (debug isdn q931) message, where Telco sends to Cisco the
AOC message, but it is not forwarded.
Feb 25 10:48:44.917: ISDN Se3/0:15 Q931: RX <- FACILITY pd = 8 callref =
0x8E7E
Facility i = 0x91A113020227B7020122300AA105300302010B820100
Any ideas / tricks ???
I have the implemented the following scheme:
Siemens HiComm PBX <--- E1 PRI ---> Cisco AS 5350 <--- E1 PRI ---> PSTN
Telecom
The ISDN "switch-type" is net5 (aka ETSI).
The Telco is supposed to send us AOC charging units. That has to be sent to
the Siemens PBX which takes care of charging / billing every call.
The problem is that Cisco does *not* always forward the AOC message to the
PBX.
Here is an example (debug isdn q931) message, where Telco sends to Cisco the
AOC message, but it is not forwarded.
Feb 25 10:48:44.917: ISDN Se3/0:15 Q931: RX <- FACILITY pd = 8 callref =
0x8E7E
Facility i = 0x91A113020227B7020122300AA105300302010B820100
Any ideas / tricks ???