Hi everybody,
I have an h323 two zone gw-gk topology were one of the zones is my upstream
Voip provider.
When i make a call,i get the following in the voip call leg:
Telephony call-legs: 1
SIP call-legs: 0
H323 call-legs: 1
MGCP call-legs: 0
Total call-legs: 2
1438 : 61096545hs.1 +-1 pid:10 Answer <xxxxx> connected
dur 00:00:00 tx:0/0 rx:0/0
Tele 1:D:429: tx:0/0/0ms None noise:0 acom:0 i/0:0/0 dBm
1438 : 61096546hs.1 +-1 pid:100 Originate <xxxxxxx> connecting
dur 00:00:00 tx:0/0 rx:0/0
IP 0.0.0.0:0 rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g729r8 pre-ietf
Looks like i don't receive an ip address to reach my upstream's terminating
gateway.
The call drops with a cause "no route to destination"
What can be the cause of this?
Thank you in advance,
Kostas
I have an h323 two zone gw-gk topology were one of the zones is my upstream
Voip provider.
When i make a call,i get the following in the voip call leg:
Telephony call-legs: 1
SIP call-legs: 0
H323 call-legs: 1
MGCP call-legs: 0
Total call-legs: 2
1438 : 61096545hs.1 +-1 pid:10 Answer <xxxxx> connected
dur 00:00:00 tx:0/0 rx:0/0
Tele 1:D:429: tx:0/0/0ms None noise:0 acom:0 i/0:0/0 dBm
1438 : 61096546hs.1 +-1 pid:100 Originate <xxxxxxx> connecting
dur 00:00:00 tx:0/0 rx:0/0
IP 0.0.0.0:0 rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g729r8 pre-ietf
Looks like i don't receive an ip address to reach my upstream's terminating
gateway.
The call drops with a cause "no route to destination"
What can be the cause of this?
Thank you in advance,
Kostas