Scott,
have 0 for operator and 0512 creates an overlapping dialplan.
when you setup the operator 0 translation pattern that is marked
for "urgent priority" by default which means anytime ccm receives
the digit string "0" it will match this pattern and immediately route the
call.
Under route patterns you have the option of enable/disable urgent priorty.
There really is no clean solution when using overlapping dialplan.
Your best bet is to remove the overlap.
/Wes
> -----Original Message-----
> From: pacug-bounces@tire.patch.com
> [mailto:pacug-bounces@tire.patch.com]On Behalf Of Voll, Scott
> Sent: Thursday, October 16, 2003 1:57 PM
> To: cisco-voip@puck.nether.net; pacug@patch.com
> Subject: [PACUG] Route Pattern / Translation pattern / MGCP
>
>
>
> I have CM 3.3.3 and a 3640 running MGCP 12.2.15T.
>
> I have set up a translation pattern of 0 to translate to the
> Receptionist x5900.
>
> Here's my problem.
>
> I now have to route some old numbers into this new system. The number
> just happens to be 0512.
>
> So if I test it I go to the receptionist. How do I make it so that when
> the number comes in on my PRI it goes to the fax machine x5920 like it
> should. Translation pattern already set up.
>
> Is there some kind of time out I need to set on the Router, CM?
>
> Help Please,
>
> Scott Voll
> Network Analyst, CCNA
> Willamette ESD
>
> _______________________________________________
> PACUG mailing list
> PACUG@tire.patch.com
> http://tire.patch.com/mailman/listinfo/pacug
have 0 for operator and 0512 creates an overlapping dialplan.
when you setup the operator 0 translation pattern that is marked
for "urgent priority" by default which means anytime ccm receives
the digit string "0" it will match this pattern and immediately route the
call.
Under route patterns you have the option of enable/disable urgent priorty.
There really is no clean solution when using overlapping dialplan.
Your best bet is to remove the overlap.
/Wes
> -----Original Message-----
> From: pacug-bounces@tire.patch.com
> [mailto:pacug-bounces@tire.patch.com]On Behalf Of Voll, Scott
> Sent: Thursday, October 16, 2003 1:57 PM
> To: cisco-voip@puck.nether.net; pacug@patch.com
> Subject: [PACUG] Route Pattern / Translation pattern / MGCP
>
>
>
> I have CM 3.3.3 and a 3640 running MGCP 12.2.15T.
>
> I have set up a translation pattern of 0 to translate to the
> Receptionist x5900.
>
> Here's my problem.
>
> I now have to route some old numbers into this new system. The number
> just happens to be 0512.
>
> So if I test it I go to the receptionist. How do I make it so that when
> the number comes in on my PRI it goes to the fax machine x5920 like it
> should. Translation pattern already set up.
>
> Is there some kind of time out I need to set on the Router, CM?
>
> Help Please,
>
> Scott Voll
> Network Analyst, CCNA
> Willamette ESD
>
> _______________________________________________
> PACUG mailing list
> PACUG@tire.patch.com
> http://tire.patch.com/mailman/listinfo/pacug