Mailing List Archive

Rivo Tahina RAZAFINDRATSIFA (r.tahina@dts.mg) wrote:
> I have 2 Cisco 3620 which I have to connect using 8xE1,
> any idea for module selection for each router?

NM-8E1-IMA

Cheers,

--

Mark Drayton
izR Solutions Ltd
Tel: +44 08707 447799

Thank you for the answer, does NM-8E1-IMA requires ATM ?
The 8E1 are private and do not make use of any ATM nor FR, just like leased
line.

Thanks
----- Original Message -----
From: Mark Drayton <mark.drayton@izrsolutions.com>
To: Rivo Tahina RAZAFINDRATSIFA <r.tahina@dts.mg>
Cc: <cisco-nsp@puck.nether.net>
Sent: Thursday, October 17, 2002 2:38 PM
Subject: Re: [nsp] connecting 2 sites with 16Mbps microwave


> Rivo Tahina RAZAFINDRATSIFA (r.tahina@dts.mg) wrote:
> > I have 2 Cisco 3620 which I have to connect using 8xE1,
> > any idea for module selection for each router?
>
> NM-8E1-IMA
>
> Cheers,
>
> --
>
> Mark Drayton
> izR Solutions Ltd
> Tel: +44 08707 447799
> _______________________________________________
> cisco-nsp mailing list real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>

RAZAFINDRATSIFA Rivo Tahina (r.tahina@dts.mg) wrote:
> Thank you for the answer, does NM-8E1-IMA requires ATM ?
> The 8E1 are private and do not make use of any ATM nor FR, just like
> leased line.

Yes, that should work. I read something on cisco.com about getting the
circuit provisioned for IMA, so perhaps you need to talk to your telco.

This may help:

http://groups.google.com/groups?hl=en&lr=&ie=UTF-8&oe=UTF-8&th=f9a5d00986c9162c&seekm=39c67a66.25679435%40news.blackfoot.net&frame=off

Cheers,

--

Mark Drayton