Mailing List Archive: [nsp] T3 unchannelized problem

[nsp] T3 unchannelized problem

Sep 22, 2002, 4:10 AM

Post #1 of 4 (1598 views)

We are installing a PA-MC-T3+ in a 7206VXR and trying to configure the
circuit as a full T3 line -unchannelized. We can see the command 'no
channelized' in the leg-B 7507 router but not in the 7206. I can't believe
that the 7206 cannot work in an unchannelized configuration. Is there
something we are missing out in the T3 controller?

Any ideas/help/pointer would be great;y appreciated.

Thanks in advance.

-nick/

Re: [nsp] T3 unchannelized problem [ In reply to ]

mark at noc

Sep 22, 2002, 9:04 AM

Post #2 of 4 (1574 views)

Permalink

>> We are installing a PA-MC-T3+ in a 7206VXR and trying to configure the
>> circuit as a full T3 line -unchannelized

This is all I have in 12.0(21)S

controller T3 4/1
no channelized

It works.

-mark

Re: [nsp] T3 unchannelized problem [ In reply to ]

james+cisco at vincentsystems

Sep 22, 2002, 9:22 AM

Post #3 of 4 (1562 views)

Permalink

On Sun, Sep 22, 2002 at 07:10:47PM +0800, Nick Kraal wrote:
| We are installing a PA-MC-T3+ in a 7206VXR and trying to configure the
| circuit as a full T3 line -unchannelized. We can see the command 'no
| channelized' in the leg-B 7507 router but not in the 7206. I can't believe
| that the 7206 cannot work in an unchannelized configuration. Is there
| something we are missing out in the T3 controller?

We have a PA-MC-2T3+ in our 7206VXR, and it requires a minimum IOS of
12.0S or 12.1E for "no channelized" to work. Your card may have similar
requirements.

-James

Re: [nsp] T3 unchannelized problem [ In reply to ]

kyu at opnet

Sep 22, 2002, 2:01 PM

Post #4 of 4 (1567 views)

Permalink

Nick,

You need 12.0(14)S.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limi
t/120s/120s14/12s_ct3.htm

Kent

----- Original Message -----
From: "Nick Kraal" <nick@arc.net.my>
To: <cisco-nsp@puck.nether.net>
Sent: Sunday, September 22, 2002 7:10 AM
Subject: [nsp] T3 unchannelized problem

> We are installing a PA-MC-T3+ in a 7206VXR and trying to configure the
> circuit as a full T3 line -unchannelized. We can see the command 'no
> channelized' in the leg-B 7507 router but not in the 7206. I can't believe
> that the 7206 cannot work in an unchannelized configuration. Is there
> something we are missing out in the T3 controller?
>
> Any ideas/help/pointer would be great;y appreciated.
>
> Thanks in advance.
>
> -nick/
>
>
>
> _______________________________________________
> cisco-nsp mailing list real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/