Mailing List Archive

Greetings all
I am trying to configure CFM using simple topology with xconnect as L2VPN service.
CE1 - PE2 - PE3 - CE7

ethernet cfm ieee
ethernet cfm global
ethernet cfm traceroute cache
ethernet cfm alarm notification all
ethernet cfm domain SPCOR_DOMAIN level 7
service EVC_SRVC evc EVC1
mep mpid 170
mip auto-create
!
ethernet evc EVC1
oam protocol cfm domain SPCOR_DOMAIN

interface GigabitEthernet1
no ip address
negotiation auto
no mop enabled
no mop sysid
service instance 10 ethernet EVC1
encapsulation dot1q 17
xconnect 10.1.100.3 17 encapsulation mpls
cfm mep domain SPCOR_DOMAIN mpid 170

For local learning , am able to get the information.

PE2#show ethernet cfm maintenance-points local
Local MEPs:
--------------------------------------------------------------------------------
MPID Domain Name Lvl MacAddress Type CC
Ofld Domain Id Dir Port Id
MA Name SrvcInst Source
EVC name
--------------------------------------------------------------------------------
170 SPCOR_DOMAIN 7 001e.f636.e6bf XCON I
No SPCOR_DOMAIN Up Gi1 N/A
EVC_SRVC 10 Static
EVC1

Total Local MEPs: 1

Local MIPs: None

But am not able to get any remote information.

PE2#show ethernet cfm maintenance-points remote
PE2#

PE2#ping ethernet mpid 170 domain SPCOR_DOMAIN service EVC_SRVC
% No RMEP entry found in for mpid 170 at domain SPCOR_DOMAIN service EVC_SRVC, evc EVC1.

Any lights would be appreciated.
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/