Hi
I have a Cisco NAS 2600 running with Windows 2000 Server IAS (Radius) software, and can not get call-back to work properly. I am using Cisco AV-Pair "lcp:callback-dialstring=", and it allows call-back to all my RAS users to any specified number. But it also seems to override the profile settings in Active Directory, because even users with "no callback" or "administrator specified" call-back numbers now have the ability to get call-back to any number. Does anyone have any information regarding this please!! I have logged calls with both Microsoft and Cisco locally with regards to this matter - but with no luck. I am also sending a copy of my "show run" and "show ver" commands on the Cisco router at the end of this message.
Kind Regards
DIRK
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname AGHS_RAS
!
enable secret 5 $1$VwT1$Z.2Iyjjci2ni1IOWBnJd9/
!
username aghs_ras password 0 aghs
aaa new-model
!
!
aaa authentication ppp default group radius
aaa authentication ppp dialins group radius local
aaa authorization network default group radius
aaa accounting network default start-stop group radius
aaa session-id common
ip subnet-zero
no ip domain lookup
ip domain name aghs.co.za
ip name-server 196.7.0.138
ip name-server 196.7.142.132
!
ip dhcp-server 172.18.168.105
isdn switch-type basic-net3
isdn voice-call-failure 0
!
!
!
!
interface Loopback0
ip address 2.2.2.2 255.255.255.255
!
interface Ethernet0/0
ip address 172.18.168.93 255.255.252.0
no ip mroute-cache
half-duplex
no cdp enable
!
interface BRI0/0
no ip address
encapsulation ppp
dialer rotary-group 1
dialer-group 1
isdn switch-type basic-net3
!
interface BRI0/1
no ip address
encapsulation ppp
dialer rotary-group 1
dialer-group 1
isdn switch-type basic-net3
!
interface Group-Async1
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-C-M), Version 12.3(1a), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Fri 06-Jun-03 22:08 by dchih
Image text-base: 0x80008098, data-base: 0x80C139C0
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
AGHS_RAS uptime is 4 days, 20 hours, 4 minutes
System returned to ROM by reload
System image file is "flash:c2600-c-mz.123-1a.bin"
cisco 2610 (MPC860) processor (revision 0x203) with 28672K/4096K bytes of memory
.
Processor board ID JAD04525NZR (2686337594)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
Basic Rate ISDN software, Version 1.1.
1 Ethernet/IEEE 802.3 interface(s)
2 ISDN Basic Rate interface(s)
8 terminal line(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
I have a Cisco NAS 2600 running with Windows 2000 Server IAS (Radius) software, and can not get call-back to work properly. I am using Cisco AV-Pair "lcp:callback-dialstring=", and it allows call-back to all my RAS users to any specified number. But it also seems to override the profile settings in Active Directory, because even users with "no callback" or "administrator specified" call-back numbers now have the ability to get call-back to any number. Does anyone have any information regarding this please!! I have logged calls with both Microsoft and Cisco locally with regards to this matter - but with no luck. I am also sending a copy of my "show run" and "show ver" commands on the Cisco router at the end of this message.
Kind Regards
DIRK
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname AGHS_RAS
!
enable secret 5 $1$VwT1$Z.2Iyjjci2ni1IOWBnJd9/
!
username aghs_ras password 0 aghs
aaa new-model
!
!
aaa authentication ppp default group radius
aaa authentication ppp dialins group radius local
aaa authorization network default group radius
aaa accounting network default start-stop group radius
aaa session-id common
ip subnet-zero
no ip domain lookup
ip domain name aghs.co.za
ip name-server 196.7.0.138
ip name-server 196.7.142.132
!
ip dhcp-server 172.18.168.105
isdn switch-type basic-net3
isdn voice-call-failure 0
!
!
!
!
interface Loopback0
ip address 2.2.2.2 255.255.255.255
!
interface Ethernet0/0
ip address 172.18.168.93 255.255.252.0
no ip mroute-cache
half-duplex
no cdp enable
!
interface BRI0/0
no ip address
encapsulation ppp
dialer rotary-group 1
dialer-group 1
isdn switch-type basic-net3
!
interface BRI0/1
no ip address
encapsulation ppp
dialer rotary-group 1
dialer-group 1
isdn switch-type basic-net3
!
interface Group-Async1
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-C-M), Version 12.3(1a), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Fri 06-Jun-03 22:08 by dchih
Image text-base: 0x80008098, data-base: 0x80C139C0
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
AGHS_RAS uptime is 4 days, 20 hours, 4 minutes
System returned to ROM by reload
System image file is "flash:c2600-c-mz.123-1a.bin"
cisco 2610 (MPC860) processor (revision 0x203) with 28672K/4096K bytes of memory
.
Processor board ID JAD04525NZR (2686337594)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
Basic Rate ISDN software, Version 1.1.
1 Ethernet/IEEE 802.3 interface(s)
2 ISDN Basic Rate interface(s)
8 terminal line(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102