Mailing List Archive

5300 configured with NFAS, can not configure "Serial 1:23" or "Serial
2:23"....

This is my first time configuring NFAS. The switch tech indicates no
errors on
his side.... I just can't configure the b-channels for "controller T1
1" or
"controller T1 2"....

Any ideas anyone?????

Thanks!

---------------------- config b-channels ------------------

c5300-1.uslec(config)#int serial 1:23
% Cannot access B-channel interfaces
c5300-1.uslec(config)#

------------------- NFAS CONFIG --------------------------

controller T1 0
framing esf
clock source line primary
linecode b8zs
pri-group timeslots 1-24 nfas_d primary nfas_int 1 nfas_group 1
description USLEC PRI T1/HCGS/07393/022/US
!
controller T1 1
framing esf
clock source line secondary 1
linecode b8zs
pri-group timeslots 1-24 nfas_d backup nfas_int 2 nfas_group 1
description USLEC PRI T1/HCGS/07394/022/US
!
controller T1 2
framing esf
clock source line secondary 2
linecode b8zs
pri-group timeslots 1-24 nfas_d none nfas_int 3 nfas_group 1
description USLEC PRI T1/HCGS/07395/022/US
!

------------------- NFAS STATUS ------------------------------

c5300-1.uslec#show isdn nfas group 1

ISDN NFAS GROUP 1 ENTRIES:

The primary D is Serial0:23.
The backup D is Serial1:23.
The NFAS member is Serial2:23.

There are 3 total nfas members.
There are 70 total available B channels.
The primary D-channel is DSL 0 in state IN SERVICE
The backup D-channel is DSL 1 in state STANDBY
The current active layer 2 DSL is 0.
c5300-1.uslec#

------------------ Controller STATUS --------------------------

c5300-1.uslec#show cont t1 1
T1 1 is up.
Applique type is Channelized T1
Cablelength is long gain36 0db
Description: USLEC PRI T1/HCGS/07394/022/US
No alarms detected.
alarm-trigger is not set
Version info of slot 0: HW: 1, PLD Rev: 11
Framer Version: 0x8

Manufacture Cookie Info:
EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x4A,
Board Hardware Version 3.1, Item Number 800-3881-02,
Board Revision B0, Serial Number 20746771,
PLD/ISP Version 0.1, Manufacture Date 2-Jul-2000.

Framing is ESF, Line Code is B8ZS, Clock Source is Line Secondary.
Data in current interval (26 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail
Secs
c5300-1.uslec#

Regards,

Michael Jung
Confluent Technologies
11857 Commonwealth Drive
Louisville, KY 40299
502-212-4045 Work Voice