Hi,
I have a couple of AS5300s running 12.1(9) that are gathering
accounting information from users authenticating with an unknown
radius server. I have a suspicion that this unknown radius server
belongs to WebTV as both customers connect through us to use that
service. Below you will find my aaa set up, is there anything I can
modify in there to make the RAS discard accounting info from radius
servers not in the config?
aaa new-model
aaa authentication login default local group radius
aaa authentication login TELNET local
aaa authentication ppp default if-needed local group radius
aaa authorization exec default group radius local
aaa authorization network default group radius
aaa accounting delay-start
aaa accounting network default start-stop group radius
aaa accounting system default wait-start group radius
Thanks,
Eddie
--
Edward Hutchens -=Data Technician=- NTELOS IP routing
http://www.ntelos.net
I have a couple of AS5300s running 12.1(9) that are gathering
accounting information from users authenticating with an unknown
radius server. I have a suspicion that this unknown radius server
belongs to WebTV as both customers connect through us to use that
service. Below you will find my aaa set up, is there anything I can
modify in there to make the RAS discard accounting info from radius
servers not in the config?
aaa new-model
aaa authentication login default local group radius
aaa authentication login TELNET local
aaa authentication ppp default if-needed local group radius
aaa authorization exec default group radius local
aaa authorization network default group radius
aaa accounting delay-start
aaa accounting network default start-stop group radius
aaa accounting system default wait-start group radius
Thanks,
Eddie
--
Edward Hutchens -=Data Technician=- NTELOS IP routing
http://www.ntelos.net