The problem was at the radius server (ALEPO) .At the group configuration it was Idle-time out 120 min and the session timeout 2 hours .
I put them 0 and 0 and restart the server .After that the absolute timer to disconnect was nor appeared to the sessions of the users.
The idle-timeout and Session -timeout are normal parameters but maybe a problem of radius server.
I want to thank all of you that have responded to my email and helped me to resolve this issue
Regards Ilir
----- Original Message -----
From: Ilir Nako
To: Robert Blayzor
Cc: cisco-bba@puck.nether.net
Sent: Saturday, July 26, 2008 11:39 PM
Subject: Re: [cisco-bba] windows messenger disconnects in periodic moments ,in pppoe connection
Look what is the output of one virtual-access parametres:
7200pppoe#sh interfaces virtual-access 2.36
Virtual-Access2.36 is up, line protocol is up
Hardware is Virtual Access interface
Interface is unnumbered. Using address of GigabitEthernet0/2.161 (192.168.160.1)
MTU 1492 bytes, BW 100000 Kbit, DLY 100000 usec,
reliability 255/255, txload 29/255, rxload 25/255
Encapsulation PPP, LCP Open
Open: IPCP
PPPoE vaccess, cloned from Virtual-Template161
Vaccess status 0x0
Keepalive set (10 sec)
63 packets input, 2060 bytes
44 packets output, 559 bytes
Time to interface disconnect: absolute 04:56:48, idle 03:16:48
Last clearing of "show interface" counters never
7200pppoe#sh interfaces virtual-access 2.36
Virtual-Access2.36 is up, line protocol is up
Hardware is Virtual Access interface
Interface is unnumbered. Using address of GigabitEthernet0/2.161 (192.168.160.1)
MTU 1492 bytes, BW 100000 Kbit, DLY 100000 usec,
reliability 255/255, txload 29/255, rxload 25/255
Encapsulation PPP, LCP Open
Open: IPCP
PPPoE vaccess, cloned from Virtual-Template161
Vaccess status 0x0
Keepalive set (10 sec)
63 packets input, 2060 bytes
44 packets output, 559 bytes
Time to interface disconnect: absolute 04:56:47, idle 03:16:47
Here I think must be the problem .
This absolute timer is directed by radius server .
ilir
----- Original Message -----
From: "Robert Blayzor" <rblayzor.bulk@inoc.net>
To: "Ilir Nako" <inako@abcom.al>
Cc: <cisco-bba@puck.nether.net>
Sent: Saturday, July 26, 2008 6:21 PM
Subject: Re: [cisco-bba] windows messenger disconnects in periodic moments , in pppoe connection
> On Jul 24, 2008, at 10:11 AM, Ilir Nako wrote:
>> interface Virtual-Template161
>> mtu 1492
>> ip unnumbered GigabitEthernet0/2.161
>> ip nat inside
>> ip virtual-reassembly
>> peer default ip address pool pppoevlan161
>> ppp mtu adaptive
>> ppp authentication pap
>> ppp multilink
>
>
> Lose "ip virtual-reassembly". That's something you want to limit on
> to CPE devices or symmetric connections, not on a bunch of individual
> PPP terminations. Not to mention, if you're doing this for a few
> hundred PPPoX sessions, it's probably a considerable performance hit.
>
> Also, are you doing multilink? If not, you can lose that as well..
>
> --
> Robert Blayzor, BOFH
> INOC, LLC
> rblayzor@inoc.net
> http://www.inoc.net/~rblayzor/
>
>
>
> __________ Information from ESET NOD32 Antivirus, version of virus signature database 2888 (20080220) __________
>
> The message was checked by ESET NOD32 Antivirus.
>
> http://www.eset.com
>
>
__________ Information from ESET NOD32 Antivirus, version of virus signature database 2888 (20080220) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
------------------------------------------------------------------------------
_______________________________________________
cisco-bba mailing list
cisco-bba@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-bba
__________ Information from ESET NOD32 Antivirus, version of virus signature database 2888 (20080220) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
I put them 0 and 0 and restart the server .After that the absolute timer to disconnect was nor appeared to the sessions of the users.
The idle-timeout and Session -timeout are normal parameters but maybe a problem of radius server.
I want to thank all of you that have responded to my email and helped me to resolve this issue
Regards Ilir
----- Original Message -----
From: Ilir Nako
To: Robert Blayzor
Cc: cisco-bba@puck.nether.net
Sent: Saturday, July 26, 2008 11:39 PM
Subject: Re: [cisco-bba] windows messenger disconnects in periodic moments ,in pppoe connection
Look what is the output of one virtual-access parametres:
7200pppoe#sh interfaces virtual-access 2.36
Virtual-Access2.36 is up, line protocol is up
Hardware is Virtual Access interface
Interface is unnumbered. Using address of GigabitEthernet0/2.161 (192.168.160.1)
MTU 1492 bytes, BW 100000 Kbit, DLY 100000 usec,
reliability 255/255, txload 29/255, rxload 25/255
Encapsulation PPP, LCP Open
Open: IPCP
PPPoE vaccess, cloned from Virtual-Template161
Vaccess status 0x0
Keepalive set (10 sec)
63 packets input, 2060 bytes
44 packets output, 559 bytes
Time to interface disconnect: absolute 04:56:48, idle 03:16:48
Last clearing of "show interface" counters never
7200pppoe#sh interfaces virtual-access 2.36
Virtual-Access2.36 is up, line protocol is up
Hardware is Virtual Access interface
Interface is unnumbered. Using address of GigabitEthernet0/2.161 (192.168.160.1)
MTU 1492 bytes, BW 100000 Kbit, DLY 100000 usec,
reliability 255/255, txload 29/255, rxload 25/255
Encapsulation PPP, LCP Open
Open: IPCP
PPPoE vaccess, cloned from Virtual-Template161
Vaccess status 0x0
Keepalive set (10 sec)
63 packets input, 2060 bytes
44 packets output, 559 bytes
Time to interface disconnect: absolute 04:56:47, idle 03:16:47
Here I think must be the problem .
This absolute timer is directed by radius server .
ilir
----- Original Message -----
From: "Robert Blayzor" <rblayzor.bulk@inoc.net>
To: "Ilir Nako" <inako@abcom.al>
Cc: <cisco-bba@puck.nether.net>
Sent: Saturday, July 26, 2008 6:21 PM
Subject: Re: [cisco-bba] windows messenger disconnects in periodic moments , in pppoe connection
> On Jul 24, 2008, at 10:11 AM, Ilir Nako wrote:
>> interface Virtual-Template161
>> mtu 1492
>> ip unnumbered GigabitEthernet0/2.161
>> ip nat inside
>> ip virtual-reassembly
>> peer default ip address pool pppoevlan161
>> ppp mtu adaptive
>> ppp authentication pap
>> ppp multilink
>
>
> Lose "ip virtual-reassembly". That's something you want to limit on
> to CPE devices or symmetric connections, not on a bunch of individual
> PPP terminations. Not to mention, if you're doing this for a few
> hundred PPPoX sessions, it's probably a considerable performance hit.
>
> Also, are you doing multilink? If not, you can lose that as well..
>
> --
> Robert Blayzor, BOFH
> INOC, LLC
> rblayzor@inoc.net
> http://www.inoc.net/~rblayzor/
>
>
>
> __________ Information from ESET NOD32 Antivirus, version of virus signature database 2888 (20080220) __________
>
> The message was checked by ESET NOD32 Antivirus.
>
> http://www.eset.com
>
>
__________ Information from ESET NOD32 Antivirus, version of virus signature database 2888 (20080220) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
------------------------------------------------------------------------------
_______________________________________________
cisco-bba mailing list
cisco-bba@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-bba
__________ Information from ESET NOD32 Antivirus, version of virus signature database 2888 (20080220) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com