Mailing List Archive

Wayne:

Please post a copy of "sh proc cpu | exc 0.00.*0.00"

Also, if you can capture a copy of:
show ip traffic
sh ip interface
show interfaces switching
and post that somewhere we'll likely see something to get you started on.

Regards,

Frank

-----Original Message-----
From: cisco-bba-bounces@puck.nether.net
[mailto:cisco-bba-bounces@puck.nether.net] On Behalf Of Wayne Lee
Sent: Wednesday, May 30, 2007 10:09 AM
To: cisco-bba@puck.nether.net
Subject: [cisco-bba] 7206vxr High cpu usage

Hello.

I have high CPU usage on our 7206VXR NPE-G1 with 1 gig of memory.
We are using this router for PPPoA Broadband and also BGP for internet
traffic.

Current IOS ver = (C7200-IS-M), Version 12.3(6b)
Current online users = 1845
Current BGP neighbours (full routes) = 5
Current mem usage (5 minute avg) = 292 meg
Current CPU usgae (5 min avg) = 26%
Current total throughput in = 91.09 bits per sec
Current total throughput out = 95.46 bit per sec

I've been reading the list and following the threads on high CPU usage,
we have no compression applied to the Virtual-Access interfaces. I'm
out of my depth here so any help would be appreceated.

lc7206#sh processes cpu history

lc7206 03:29:41 PM Wednesday May 30 2007 GMT
1111111777771111111111111112222222222111111111111111111111
8899999111117777788888777778888899999888889999966666888887
100
90
80
70 *****
60 *****
50 *****
40 *****
30 ***** **********
20 ************************************************************
10 ************************************************************
0....5....1....1....2....2....3....3....4....4....5....5....
0 5 0 5 0 5 0 5 0 5
CPU% per second (last 60 seconds)

4756777775765756747657666686667567576575674776756774756646
7174316611280294166471298033315380027304655318582007071969
100
90
80 ** * * * * *
70 * ***** ** * * * * ** * * ** ** * ** **** ** * * *
60 ******** ** **** ************* ** ** * ** ******** **** ***
50 ************************************************************
40 ************************************************************
30 ***####*##*#####**########********#******#*##*#*************
20 ############################################################
10 ############################################################
0....5....1....1....2....2....3....3....4....4....5....5....
0 5 0 5 0 5 0 5 0 5
CPU% per minute (last 60 minutes)
* = maximum CPU% # = average CPU%

8989888778867888787789988999888766877877888887888787776768677778888787
1843021544080011839920042548801686376242697353562853996942811942043207
100 * * *
90 * * ** **** *** * ** *
*
80 ******** ** ******************* **** ***** ***** ** * * * **** **
*
70 ********************************************************
***************
60
************************************************************************
50
************************************************************************
40
************************************************************************
30
*#**********************************************************************
20
#######*********###############*********############*******************#
10
########################################################################
0....5....1....1....2....2....3....3....4....4....5....5....6....6....7.
0 5 0 5 0 5 0 5 0 5 0 5 0
CPU% per hour (last 72 hours)
* = maximum CPU% # = average CPU%




Current config


vpdn-group telco
accept-dialin
protocol l2tp
virtual-template 106
terminate-from hostname telco
local name linkconnect
lcp renegotiation always
l2tp tunnel password 0 abc


interface Virtual-Template106
description telco Virtual-Template
ip unnumbered Loopback106
ip verify unicast reverse-path
ip load-sharing per-packet
ip tcp adjust-mss 1400
no logging event link-status
peer default ip address pool dsl-dynamic
ppp mtu adaptive
ppp authentication chap dsl
ppp accounting dsl
ppp ipcp dns a.b.c.d
ppp multilink


We are not applying any access lists to the Virtaul access interfaces.


Regards

Wayne
_______________________________________________
cisco-bba mailing list
cisco-bba@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-bba

_______________________________________________
cisco-bba mailing list
cisco-bba@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-bba

Hello Frank

Posted output as requested.

http://www.link-connect.com/cisco/show-ip-interface.txt

http://www.link-connect.com/cisco/show-int-switching.txt

http://www.link-connect.com/cisco/sh-proc-and-show-ip-traf.txt

I have only grabbed the first 200 interfaces.

Thanks for your help

Wayne


On 5/30/07, Frank Bulk <frnkblk@iname.com> wrote:
> Wayne:
>
> Please post a copy of "sh proc cpu | exc 0.00.*0.00"
>
> Also, if you can capture a copy of:
> show ip traffic
> sh ip interface
> show interfaces switching
> and post that somewhere we'll likely see something to get you started on.
>
> Regards,
>
> Frank
>
> -----Original Message-----
> From: cisco-bba-bounces@puck.nether.net
> [mailto:cisco-bba-bounces@puck.nether.net] On Behalf Of Wayne Lee
> Sent: Wednesday, May 30, 2007 10:09 AM
> To: cisco-bba@puck.nether.net
> Subject: [cisco-bba] 7206vxr High cpu usage
>
> Hello.
>
> I have high CPU usage on our 7206VXR NPE-G1 with 1 gig of memory.
> We are using this router for PPPoA Broadband and also BGP for internet
> traffic.
>
> Current IOS ver = (C7200-IS-M), Version 12.3(6b)
> Current online users = 1845
> Current BGP neighbours (full routes) = 5
> Current mem usage (5 minute avg) = 292 meg
> Current CPU usgae (5 min avg) = 26%
> Current total throughput in = 91.09 bits per sec
> Current total throughput out = 95.46 bit per sec
>
> I've been reading the list and following the threads on high CPU usage,
> we have no compression applied to the Virtual-Access interfaces. I'm
> out of my depth here so any help would be appreceated.
>
> lc7206#sh processes cpu history
>
> lc7206 03:29:41 PM Wednesday May 30 2007 GMT
> 1111111777771111111111111112222222222111111111111111111111
> 8899999111117777788888777778888899999888889999966666888887
> 100
> 90
> 80
> 70 *****
> 60 *****
> 50 *****
> 40 *****
> 30 ***** **********
> 20 ************************************************************
> 10 ************************************************************
> 0....5....1....1....2....2....3....3....4....4....5....5....
> 0 5 0 5 0 5 0 5 0 5
> CPU% per second (last 60 seconds)
>
> 4756777775765756747657666686667567576575674776756774756646
> 7174316611280294166471298033315380027304655318582007071969
> 100
> 90
> 80 ** * * * * *
> 70 * ***** ** * * * * ** * * ** ** * ** **** ** * * *
> 60 ******** ** **** ************* ** ** * ** ******** **** ***
> 50 ************************************************************
> 40 ************************************************************
> 30 ***####*##*#####**########********#******#*##*#*************
> 20 ############################################################
> 10 ############################################################
> 0....5....1....1....2....2....3....3....4....4....5....5....
> 0 5 0 5 0 5 0 5 0 5
> CPU% per minute (last 60 minutes)
> * = maximum CPU% # = average CPU%
>
> 8989888778867888787789988999888766877877888887888787776768677778888787
> 1843021544080011839920042548801686376242697353562853996942811942043207
> 100 * * *
> 90 * * ** **** *** * ** *
> *
> 80 ******** ** ******************* **** ***** ***** ** * * * **** **
> *
> 70 ********************************************************
> ***************
> 60
> ************************************************************************
> 50
> ************************************************************************
> 40
> ************************************************************************
> 30
> *#**********************************************************************
> 20
> #######*********###############*********############*******************#
> 10
> ########################################################################
> 0....5....1....1....2....2....3....3....4....4....5....5....6....6....7.
> 0 5 0 5 0 5 0 5 0 5 0 5 0
> CPU% per hour (last 72 hours)
> * = maximum CPU% # = average CPU%
>
>
>
>
> Current config
>
>
> vpdn-group telco
> accept-dialin
> protocol l2tp
> virtual-template 106
> terminate-from hostname telco
> local name linkconnect
> lcp renegotiation always
> l2tp tunnel password 0 abc
>
>
> interface Virtual-Template106
> description telco Virtual-Template
> ip unnumbered Loopback106
> ip verify unicast reverse-path
> ip load-sharing per-packet
> ip tcp adjust-mss 1400
> no logging event link-status
> peer default ip address pool dsl-dynamic
> ppp mtu adaptive
> ppp authentication chap dsl
> ppp accounting dsl
> ppp ipcp dns a.b.c.d
> ppp multilink
>
>
> We are not applying any access lists to the Virtaul access interfaces.
>
>
> Regards
>
> Wayne
> _______________________________________________
> cisco-bba mailing list
> cisco-bba@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-bba
>
>
_______________________________________________
cisco-bba mailing list
cisco-bba@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-bba

Wayne Lee <> wrote on Wednesday, May 30, 2007 5:09 PM:

> Hello.
>
> I have high CPU usage on our 7206VXR NPE-G1 with 1 gig of memory.
> We are using this router for PPPoA Broadband and also BGP for
> internet traffic.
>
> Current IOS ver = (C7200-IS-M), Version 12.3(6b)
> Current online users = 1845
> Current BGP neighbours (full routes) = 5
> Current mem usage (5 minute avg) = 292 meg
> Current CPU usgae (5 min avg) = 26%
> Current total throughput in = 91.09 bits per sec
> Current total throughput out = 95.46 bit per sec

Why are you concerned with this load? You're seeing an average load of
up to 30% on your per-minute stats, which is not really high, is it? The
spikes you see (the max cpu) is likely from the BGP scanner, which is
doing its job scanning the full Internet table. Nothing wrong with this,
it's a low priority process, so if something more urgent comes along, it
will just sleep..

Based on the data you've just posted: I would investigate why
GigabitEthernet0/1 shows such a high number if process-switched packets,
but as long as you don't spend much CPU time in the IP Input process
(which you don't, according to the "show proc cpu" you've posted), I
wouldn't worry about it. Clear the counters and keep an eye on it..

oli
_______________________________________________
cisco-bba mailing list
cisco-bba@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-bba