Hi
I am trying to configure EtherChannel between Cisco 2950 and Juniper M10i. Traffic from Juniper is being load-balance between the two FastEthernet ports but the traffic from Cisco 2950 use a single FastEthernet at a time. Do I need any additional configuration to load-balance traffic from Cisco 2950.
Regards
Configuration done on Cisco 2950
interface Port-channel1
description *** Aggregate Ethernet with M10i ***
switchport mode access
no ip address
load-interval 30
flowcontrol send off
!
interface FastEthernet0/1
description Port 1
switchport mode access
no ip address
load-interval 30
channel-group 1 mode on
!
interface FastEthernet0/2
description Port 2
switchport mode access
no ip address
load-interval 30
channel-group 1 mode on
Configuration done on Juniper M10i
fe-0/3/2 {
description "*** Aggregate Intf with Cisco 2950 - 1";
fastether-options {
802.3ad ae0;
}
}
fe-0/3/3 {
description "*** Aggregate Intf with Cisco 2950 - 2";
fastether-options {
802.3ad ae0;
}
}
}
ae0 {
aggregated-ether-options {
link-speed 100m;
}
unit 0 {
family inet address 192.168.250.2/29;
}
}
Express yourself instantly with MSN Messenger! http://g.msn.com/8HMBEN/2728??PS=47575"]MSN Messenger Download today it's FREE!
I am trying to configure EtherChannel between Cisco 2950 and Juniper M10i. Traffic from Juniper is being load-balance between the two FastEthernet ports but the traffic from Cisco 2950 use a single FastEthernet at a time. Do I need any additional configuration to load-balance traffic from Cisco 2950.
Regards
Configuration done on Cisco 2950
interface Port-channel1
description *** Aggregate Ethernet with M10i ***
switchport mode access
no ip address
load-interval 30
flowcontrol send off
!
interface FastEthernet0/1
description Port 1
switchport mode access
no ip address
load-interval 30
channel-group 1 mode on
!
interface FastEthernet0/2
description Port 2
switchport mode access
no ip address
load-interval 30
channel-group 1 mode on
Configuration done on Juniper M10i
fe-0/3/2 {
description "*** Aggregate Intf with Cisco 2950 - 1";
fastether-options {
802.3ad ae0;
}
}
fe-0/3/3 {
description "*** Aggregate Intf with Cisco 2950 - 2";
fastether-options {
802.3ad ae0;
}
}
}
ae0 {
aggregated-ether-options {
link-speed 100m;
}
unit 0 {
family inet address 192.168.250.2/29;
}
}
Express yourself instantly with MSN Messenger! http://g.msn.com/8HMBEN/2728??PS=47575"]MSN Messenger Download today it's FREE!